Gas radiant heater Radium U 71

for heatingindustrialtube

Daygas brings together efficient, economical, quality and functional products that prioritize innovation and R&D, resulting in energy savings in the heating sector for end consumers. - Quick start-up. - Frost protection. - Low emission ratio. - High level of safety. - Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Heat resistant non-flammable cable. - Two types of tubular: Radium I and U. - 2 or 5 stage with thermostats or remote control. - Warm up by radiation without air ventilation. - Notification of fault and stage on the display screen. Capacity: 69.7 kW Gas Consumption: NG 6.75 m³/h / LPG 5.00 kg/h Dimensions: 250h / 16200L / 405w Weight: Net 220 kg / Gross 260 kg Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG Installation On Height: 450-1400 cm Electrical Connection: 230-240VAC 50-60Hz +/-15% Gas Connection: G ¾’’ Radium Tube Radiant Heaters Daygas Radium tube type radiant heaters are modern devices designed to heat high ceilings and large volumes. Radium warms the atmosphere by reflecting the heat energy generated by the combustion of the air-gas mixture inside the radiant tubes into the desired environment thanks to parabolic design aluminum reflectors. Radium tube type radiants heat people and objects, ensuring optimal comfort for heating. - The tubular radiant heaters use heat treated aluminum steel fillet tubes. - With pipes, efficient, low capacity, efficient heating is provided to end users. - Fillet tubes are designed for high performance aluminas, made of calorie steel coils to aluminum. - From raw to finished pipe, the production process is subject to special processes to show the highest radiation capability in the areas of use. Importance Of Tube On Piped Radiant Devices: The flame, created by the air-fuel mixture in the burner, flows through the pipe into the chimney gas and the waste gas is expelled. During this process, the energy generated by the burning gas in the pipe is transmitted to the pipe. Heating is ensured by the pipe emitting its energy by radiating to the environment. Therefore, the maximum heat transfer and radiation capability is directly related to the quality and suitability of the fillet tube. Reflectors of Radium Radiant Heaters The radiation beams coming out of the pipe surface area are indicated by red color (straight line), the beams reflected from the reflector are indicated by orange (dashed line). The choice of reflector material is crucial; reflective aluminum material with high reflective properties is used in these products to maximize efficiency. Device Controls - Remote control. - Integration via control board. - Pako switched manual control. - Thermostat-switched automatic control. - Integration into the automation system (Control via Scada). The variety of control scenarios offered as 5 different alternatives allows the products to be managed correctly and as desired. The most appropriate control scenario is selected by evaluating the on-site use of the devices and the site conditions. The right solution scenario facilitates both fuel savings and long-lasting, trouble-free service. Control Panel Features - Password protection. - Heat preservation mode. - Freeze protection feature. - 24/7 programmable feature. - 128 x 64 graphic LCD display. - Communication port with computer. - Automatic and manual control. - Ability to connect external temperature sensor. - Control of 8 independent zones and 32 devices in total. Analog Room Thermostat Automatically turns off the device when the set temperature is reached, and restarts when the temperature drops below the desired value, saving fuel. Temperature Sensor - Freeze protection mode. - Modulating control. - Temperature adjustment via the device. When the programmed temperature is approached, the device reduces modulation to save fuel. When the environment reaches the desired temperature, the device shuts down, and restarts as needed. Pako Switched Manual Control Step-adjusted manual control can be provided over the pako. For local solutions without a control panel, devices can be operated at the desired level via the pako switch. The heaters can be controlled with an independent step setting. When powered off, the device goes to sleep after closing procedures, ensuring long service life. Remote Control Daygas remote controls are simple-to-use devices with 3 buttons and easy functions. All functions such as on-off, heat setting, and reset can be controlled. All Daygas products can be controlled remotely with a single remote. Technical Specifications / Features: - Capacity: 69.7 kW - Gas Consumption: NG 6.75 m³/h / LPG 5.00 kg/h - Dimensions: 250h / 16200L / 405w - Weight: Net 220 kg / Gross 260 kg - Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG - Installation Height: 450-1400 cm - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾’’ - Quick start-up, frost protection, low emission, high safety, safe gas valve, low energy consumption, simple service and assembly, heat resistant non-flammable cable, two types of tubular (I and U), 2 or 5 stage with thermostats or remote control, radiation heating without air ventilation, fault and stage notification on display.