Gas radiant heater Radium I 40

ACtube

Daygas brings together efficient, economical, quality and functional products that prioritize innovation and R&D, delivering energy savings in the heating sector to end consumers. - Quick start-up. - Frost protection. - Low emission ratio. - High level of safety. - Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Heat resistant non-flammable cable. - Two types of tubular: Radium I and U. - 2 or 5 stage with thermostats or remote control. - Warm up by radiation without air ventilation. - Notification of fault and stage on the display screen. Capacity: 40 kW Gas Consumption: NG 3.80 m³/h / LPG 2.81 kg/h Dimensions: 250h / 9900-12900-15900L / 260w Weight: Net 85-110-135 kg / Gross 105-150-185 kg Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG Installation On Height: 300-900 cm Electrical Connection: 230-240VAC 50-60Hz +/-15% Gas Connection: G ¾’’ Radium Tube Radiant Heaters Daygas Radium tube type radiant heaters are modern devices designed to heat high ceilings and large volumes. Radium warms the atmosphere by reflecting the heat energy generated by the combustion of the air-gas mixture inside the radiant tubes into the desired environment thanks to parabolic design aluminum reflectors. Radium tube type radiants heat people and objects, ensuring optimal comfort for heating. - The tubular radiant heaters use heat treated aluminum steel fillet tubes. - With pipes, efficient, low capacity, efficient heating is provided to end users. - Fillet tubes are designed for high performance aluminas, made of calorie steel coils to aluminum. - From raw to finished pipe, the production process is subject to special processes to show the highest radiation capability in the areas of use. Device Controls - Remote control. - Integration via control board. - Pako switched manual control. - Thermostat-switched automatic control. - Integration into the automation system (Control via Scada). The variety of control scenarios offered as 5 different alternatives allows the products to be managed correctly and as desired. The most appropriate control scenario is selected by evaluating the on-site use of the devices in the product range and the site conditions. Therefore, the control with the right solution scenario facilitates both fuel savings and long-lasting trouble-free service. Control Panel Features - Password protection. - Heat preservation mode. - Freeze protection feature. - 24/7 programmable feature. - 128 x 64 graphic LCD display. - Communication port with computer. - Possibility of automatic and manual control. - Ability to connect external temperature sensor. - Possibility to control 8 independent zones and 32 devices in total. Analog Room Thermostat Daygas analog room thermostat automatically turns off the device when the set temperature is approached, and when the ambient temperature drops below the desired value, the device automatically switches on at the maximum level and starts working again, saving fuel. Temperature Sensor - Freeze protection mode. - Possibility of modulating control. - Temperature adjustment via the device. When devices approach the programmed temperature with the Daygas temperature sensor, it provides fuel saving by reducing the modulation value of the device according to weather conditions. When the environment reaches the desired temperature, the device automatically shuts down, and when it falls below the desired value, the device automatically switches on at the most suitable temperature level for the environment. Pako Switched Manual Control With pako switched control, step adjusted manual control can be provided over the pako. For more local solutions where there is no control panel or it is not needed, the devices can be operated at the desired level via the paco switch. The heaters can be controlled with an independent step setting. Since the device is not powered on stand-by (0) position on the Pako, the device to be turned off goes to sleep after the closing procedures, ensuring long service life. Remote Control Daygas remote controls are simple-to-use control devices with 3 buttons and easy functions. All functions of the device such as on-off, heat setting up-down and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote. Technical Specifications / Features - Capacity: 40 kW - Gas Consumption: NG 3.80 m³/h / LPG 2.81 kg/h - Dimensions: 250h / 9900-12900-15900L / 260w - Weight: Net 85-110-135 kg / Gross 105-150-185 kg - Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG - Installation Height: 300-900 cm - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾’’ - Quick start-up, frost protection, low emission ratio, high safety, safe gas valve system, low energy consumption, simple service and assembly, heat resistant non-flammable cable, two types of tubular (I and U), 2 or 5 stage with thermostats or remote control, warm up by radiation without air ventilation, notification of fault and stage on display screen.