Gas radiant heater Radium I 30

tube

Daygas brings together efficient, economical, quality and functional products that prioritize innovation and R&D, delivering energy savings in the heating sector to end consumers. - Quick start-up. - Frost protection. - Low emission ratio. - High level of safety. - Safe gas valve system. - Low energy consumption. - Simple service and assembly. - Heat resistant non-flammable cable. - Two types of tubular: Radium I and U. - 2 or 5 stage with thermostats or remote control. - Warm up by radiation without air ventilation. - Notification of fault and stage on the display screen. Capacity: 30 kW Gas Consumption: NG 2.85 m³/h / LPG 2.11 kg/h Dimensions: 250h / 6900-9900L / 260w Weight: Net 60-85 kg / Gross 80-105 kg Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG Installation On Height: 260-470 cm Electrical Connection: 230-240VAC 50-60Hz +/-15% Gas Connection: G ¾’’ Radium Tube Radiant Heaters Daygas Radium tube type radiant heaters are modern devices designed to heat high ceilings and large volumes. Radium warms the atmosphere by reflecting the heat energy generated by the combustion of the air-gas mixture inside the radiant tubes into the desired environment thanks to parabolic design aluminum reflectors. Radium tube type radiants heat people and objects, ensuring optimal comfort for heating. - The tubular radiant heaters use heat treated aluminum steel fillet tubes. - Efficient, low capacity, efficient heating to end users. - Fillet tubes are designed for high performance aluminas. Pipes are made of calorized steel coils to your aluminum. - From raw to finished pipe, the production process is subject to special processes to show the highest radiation capability in the areas of use. Importance Of Tube On Piped Radiant Devices: The flame, created by the air-fuel mixture in the burner, flows through the pipe into the chimney gas and the waste gas is expelled. During this process, the energy generated by the burning gas in the pipe is transmitted to the pipe. Heating is ensured by the pipe emitting its energy from the inside by radiating the outside area. Therefore, the maximum heat transfer and radiation capability is directly related to the quality and suitability of the fillet tube. Refiectors of Radium Radiant Heaters: The radiation beams coming out of the pipe surface area are indicated by red color (straight line), the beams reflected from the reflector are indicated by orange (dashed line). The choice of reflector material is crucial; reflective aluminum material with high reflective properties is used in our products to maximize efficiency. Reflectors are used to redirect radiation from dead spots (usually the part facing the ceiling) back to the desired environment, increasing the radiation capacity. Emissivity: Emissivity is a dimensionless number that measures how well an object can emit energy compared to a black body. It depends on factors such as body temperature, wavelength, and angle of propagation. According to Kirchhoff’s law, the emission of a body at any temperature is equal to its absorption coefficient. For real bodies, the emission coefficient varies between 0 and 1. Device Controls: - Remote control. - Integration via control board. - Pako switched manual control. - Thermostat-switched automatic control. - Integration into the automation system (Control via Scada). The variety of control scenarios (5 alternatives) allows the products to be managed correctly and as desired. The most appropriate control scenario is selected based on on-site use and site conditions, facilitating both fuel savings and long-lasting, trouble-free service. - Remote control: Simple-to-use device with 3 buttons for on-off, heat setting, and reset. All Daygas products can be controlled remotely with a single remote. - Control panel: Password protection, heat preservation mode, freeze protection, 24/7 programmable, 128x64 graphic LCD display, computer communication port, automatic/manual control, external temperature sensor connection, control of 8 independent zones and 32 devices. - Analog room thermostat: Automatically turns off the device when the set temperature is reached, and restarts when the temperature drops, saving fuel. - Temperature sensor: Freeze protection mode, modulating control, temperature adjustment via device, fuel saving by reducing modulation value according to weather conditions. - Pako switched manual control: Step-adjusted manual control via pako switch, suitable for local solutions without a control panel. Technical Specifications / Features: - Capacity: 30 kW - Gas Consumption: NG 2.85 m³/h / LPG 2.11 kg/h - Dimensions: 250h / 6900-9900L / 260w - Weight: Net 60-85 kg / Gross 80-105 kg - Operating Pressure: 21-55 mbar NG / 32-55 mbar LPG - Installation Height: 260-470 cm - Electrical Connection: 230-240VAC 50-60Hz +/-15% - Gas Connection: G ¾’’ - Quick start-up, frost protection, low emission, high safety, safe gas valve, low energy consumption, simple service and assembly, heat resistant cable, two types (I and U), 2 or 5 stage with thermostats or remote, radiation heating without air ventilation, fault/stage notification on display.