Electric valve actuator DCL series

quarter-turnworm gearcompact

Detailed Product Description Standard Torque: - 18Nm To 2500Nm - Standard Time: - 15S To 75S Power Supply: - 24VAC/110VAV/220VAC/380VAC/24VDC - Installation Angle: - 360° Protection Grade: - IP67 NEMA4/4X - Total Weight: - 1.2KG To 20KG Ambient Temperature: - -25℃~+55℃ / -13°F~+131°F - Motor Power: - 6W To 140W Description DCL common series electric actuator are typically used to drive quarter turn butterfly valves, ball valves, dampers and swinging arms. On receipt of a continuous power signal, the motor runs one direction and via an all metal gear box with last stage worm gear train rotates the output drive 90°. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position. Over torque protector is optional only if accurate output torque is needed. PTC electronic heating component is also used as thermostatically controlled anti-condensation heater that will protect actuator against damage from condensation. Actuator has been rigorous tested by CSA per UL and CSA standard. The duty rate can be over 70% for all series. The EPS system is self-calibrating which virtually eliminates "hunting" and provides an output position monitoring signal as standard. Features  - Quarter turn operation with mechanical limits  - Over torque protection by torque test function of smart full potted controller  - Integral design of Motor/control box/housing to make whole actuator compact  - Hard high pressure die cast aluminum housing with weather proof IP67 and NEMA 4X  - Two auxiliary limit switches to confirm valve position