Cookie forming machine CK3CD

1. Forming method: steel wire cutting, direct deposit or rotary deposit, farci Design work times: depositing 40 times/min, cutting 100 times/min, farci 60 times/min 2. Working width: 1200mm 3. Dimensions: 1850X2300X1800 weight：3.5(T) power:about25KW 4. The feeding trough roller, feeding pump, rotary extrusion, ascending, forward and backward movement and cutting are driven by a servo motor, the servo motor is French brand, and the reducer is a special servo reducer for Taiwan World Association. 5. Feeding trough roll: stainless steel material 6. The side plate and connecting plate of the machine head are made of aluminum alloy material, and the surface is treated with Teflon 7. The hopper is made of SUS304 stainless steel, 8. The pump teeth are made of imported food-grade nylon material, and the pump body material is made of aluminum alloy, with surface oxidation treatment. 9. The flow channel of the discharging die is made of aluminum alloy material, and the surface is oxidized. The extrusion die is made of SUS304 stainless steel. The cutting and filling die is made of imported food-grade nylon material. Each set of discharging die 10. The main side board uses Q235 carbon steel material, the thickness after processing is 22mm, and the surface is plated with hard chromium. 11. SUS304 stainless steel for main enclosure 12. Installation method: directly installed on the oven drive, the cake falls on the steel belt 13. Adopt no sanitary dead angle structure design, safe and sanitary