Hydraulic relief valve PRFA series
fluidminiatureshut-off

Hydraulic relief valve - PRFA series - THE LEE COMPANY - fluid / miniature / shut-off
Hydraulic relief valve - PRFA series - THE LEE COMPANY - fluid / miniature / shut-off
Add to favorites
Compare this product

Characteristics

Other characteristics
hydraulic, miniature, shut-off, fluid
Controlled pressure

Max.: 3,600 psi

Min.: 80 psi

DN

0.25 in

Flow rate

Max.: 0.31 us gal/min
(1.17 l/min)

Min.: 0.08 us gal/min
(0.3 l/min)

Description

This direct-acting valve is ideally suited for low flow (less than 0.31 GPM) hydraulic applications where a miniature, lightweight pressure relief valve is needed. Minimum cracking pressures are available from 80-3600 psid. An integral safety screen is available for added protection.Safety Relief ValveDiameter: 0.250 inchesFull Open Lohm Rate: 4500 Lohms maxNominal System Pressure: Up to 3000 psiCracking Pressure Range: 80 to 3600 psiGeneral PerformanceCharacteristicSpecificationLeakage at Minimum Cracking Pressure2 mL / Minute MaximumLeakage at Minimum Shutoff Pressure2 mL / Minute MaximumNominal System PressureUp to 3000 psiSystem Peak Pressure4100 psi MaximumScreen Hole Size0.008 inches NominalScreen Open Area0.014 square inches NominalTest FluidMIL-PRF-83282 at 85°FMaterialsPARTMATERIALSPECIFICATIONBody Front304 CRESAMS 5639Body Rear304 CRESAMS 5639Pin17-4PH CRESAMS 5643Poppet15-5PH CRESAMS 5659Tube304 CRESAMS 5639Spring Seat304 CRESAMS 5639Spring17-7PH CRESAMS 5678Screen304L CRESASTM A 666Braze-AMS 4774Finish: All CRES parts passivated.Pins are prewaxed. Do not degrease. Do not lubricate.Replacement Parts & AccessoriesPART NUMBERDESCRIPTIONCUTA2500306CInstallation / Extraction Tool SetCKFA2500005AReplacement PinKey Product FactsDirect-acting, miniature, lightweight pressure relief valveLow flow applications (less than 0.31 GPM)Cracking pressure range: 80-3600 psidIntegral safety screen availablePart Numbers & SpecificationsPART NUMBERFLOW DIRECTIONMINIMUM CRACKING PRESSURE (psid)FLOW POINT LOHM RATEFLOW POINT MINIMUM FLOW (gpm)FLOW POINT AT (psid)MINIMUM SHUT-OFF PRESSURE (psid)PRFA2505080LForward8045000.0830072PRFA2505500LForward50045000.13750450PRFA2505100DForward100045000.191500900PRFA2505120DForward120045000.217001080PRFA2505140DForward140045000.2119001260PRFA2505220DForward220045000.2527001980PRFA2505250DForward250045000.2730002250PRFA2505300DForward300045000.2935002700PRFA2505320DForward320045000.2937002880PRFA2505340DForward340045000.339003060PRFA2505350DForward350045000.3140003150PRFA2505360DForward360045000.3141003240PRRA2505080LReverse8045000.0830072PRRA2505500LReverse50045000.13750450PRRA2505100DReverse100045000.191500900PRRA2505120DReverse120045000.217001080PRRA2505140DReverse140045000.2119001260PRRA2505220DReverse220045000.2527001980PRRA2505250DReverse250045000.2730002250PRRA2505300DReverse300045000.2935002700PRRA2505320DReverse320045000.2937002880PRRA2505340DReverse340045000.339003060PRRA2505350DReverse350045000.3140003150PRRA2505360DReverse360045000.3141003240Specifications / Technical CharacteristicsValve Type: Direct-acting pressure reliefFlow: Less than 0.31 GPMCracking Pressure Range: 80-3600 psidNominal System Pressure: Up to 3000 psiSystem Peak Pressure: 4100 psi maxDiameter: 0.250 inchesFull Open Lohm Rate: 4500 Lohms maxIntegral safety screen availableMaterials: 304 CRES, 17-4PH CRES, 15-5PH CRES, 17-7PH CRES, 304L CRESFinish: All CRES parts passivated, pins prewaxedTest Fluid: MIL-PRF-83282 at 85°F

Catalogs

No catalogs are available for this product.

See all of THE LEE COMPANY‘s catalogs

Other THE LEE COMPANY products

Pressure Relief Valves

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.