Digital step attenuator ADRF5740 series

RFmicrowavevoltage

Ultrawideband frequency range: 10 MHz to 60 GHz Attenuation range: 2 dB steps to 22 dB Low insertion loss 1.4 dB up to 20 GHz 2.2 dB up to 44 GHz 3.3 dB up to 55 GHz Attenuation accuracy ±(0.1 + 1.0% of state) up to 20 GHz ±(0.2 + 3.0% of state) up to 44 GHz ±(0.2 + 7.0% of state) up to 55 GHz Typical step error ±0.30 dB up to 20 GHz ±0.50 dB up to 44 GHz ±0.60 dB up to 55 GHz High input linearity P0.1dB: 25.5 dBm typical IP3: 45 dBm typical High RF input power handling: 24 dBm average, 24 dBm peak Tight distribution in relative phase No low frequency spurious signals Parallel mode control, CMOS and LVTTL compatible RF amplitude settling time (0.1 dB of final RF output): 175 ns/li> 16-terminal, 2.5 mm × 2.5 mm, RoHS compliant LGA package The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps. The ADRF5740 operates from 10 MHz to 60 GHz with less than 3.3 dB of insertion loss and with ±(0.2 + 7.0% of attenuation state) of attenuation accuracy at 55 GHz. The ATTIN port of the ADRF5740 has an RF input power handling capability of 24 dBm average and 24 dBm peak for all states. The ADRF5740 requires a dual supply voltage of +3.3 V and −3.3 V. The ADRF5740 features parallel mode control, and CMOS- and low voltage transistor to transistor logic (LVTTL)-compatible controls. The ADRF5740 RF ports are designed to match a characteristic impedance of 50 Ω. The ADRF5740 comes in a 16-terminal, 2.5 mm × 2.5 mm, RoHS compliant, land grid array (LGA) package and operates from −40°C to +105°C.