Secondary switchgear XGTD8-12
currentvoltagefrequency

Secondary switchgear - XGTD8-12 - Ningbo Tianan (Group) CO.,Ltd. - current / voltage / frequency
Secondary switchgear - XGTD8-12 - Ningbo Tianan (Group) CO.,Ltd. - current / voltage / frequency
Secondary switchgear - XGTD8-12 - Ningbo Tianan (Group) CO.,Ltd. - current / voltage / frequency - image - 2
Add to favorites
Compare this product

Characteristics

Type
secondary
Electrical characteristics
arc protection, voltage, medium-voltage, frequency, current, AC, grounding
Configuration
metal-clad, gas-insulated
Applications
circuit breaker
Other characteristics
modular
Primary current

630 A, 1,250 A

VAC

12 kV

Description

General
The XGTD8-12 indoor nitrogen (N2) gas-insulated metal-clad switchgear is an advanced 12 kV electrical assembly filled with environmentally friendlier gas insulation. It is designed for reliable operation in compact secondary transmission and distribution installations, offering a modular, maintenance-reduced solution with long service life and wide environmental adaptability.

Detail introduction
The primary live parts and main circuit are sealed within welded stainless-steel gas tanks and a metal-clad enclosure, protecting against external influences. The modular design supports common-tank and extended-unit layouts, allowing flexible combinations of load switch units, circuit breaker units, metering units and bus PTs to match varied schemes and space constraints.

Standards
IEC62271-200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV up to 52 kV.
EN50181: Insertion bushings for equipment rated 1 kV to 52 kV and currents 250 A to 2500 A.
GB/T3906, GB/T11022, DL/T404, GB/T1984, GB/T1985, GB/T20840, GB/T11032 (as applicable).

Service Conditions
  • Ambient temperature: -45°C to +50°C; daily average ≤ 35°C.
  • Altitude: ≤ 4000 m (pressure adjustment recommended above 1000 m).
  • Relative humidity: daily average ≤ 95%, monthly average ≤ 90%.
  • Seismic intensity: not exceed grade 8.
  • Environment: free of corrosive or flammable gases and heavy pollution.


Technical parameter (key table items)
Rated voltage: 12 kV
Rated current: CB unit 630/1250 A; Load switch unit 630 A
Rated frequency: 50/60 Hz
1 min power-frequency withstand voltage (phase-phase/phase-earth, kV rms): 42; insulation distance: 48
Rated lightning impulse withstand voltage (peak, kV): 75; insulation distance: 85
Auxiliary circuit withstand voltage (kV): 2
Rated short-circuit breaking current (kA rms): 20/25
Rated short-circuit making current (kA peak): 50/63
Rated short-time withstand current (4 s, kA): 20/25
Main circuit resistance per phase (µΩ): ≤160
N2 gas rated operating pressure (MPa): 0.02
Mechanical life: CB/Load switch: 10000 operations; Three-position switch: 5000 operations
Internal arc (IAC) rating: 25/1 (kA/s)
Annual N2 leak rate: ≤0.1%
Protection degrees: IP67 (gas-filled compartment), IP4X (other compartments).

Product Features and Structure
  • Eco-friendlier insulation: nitrogen (N2) or dry air plus vacuum arc-extinction where applicable; avoids SF6 emissions and enables high material recyclability.
  • Safety and reliability: micro-positive gas pressure to limit leakage and maintain functional insulation under partial loss of pressure.
  • Modular and compact design: supports load switch, circuit breaker (CB), metering (M) units and bus PT units with fully insulated, fully shielded bus connections for multiple combinations.
  • Fully sealed design: primary live parts and main bus enclosed in welded stainless-steel gas tanks; DIN47636-compliant bushings; gas tank protection IP67.
  • Front-access operation: user interface and cable connections at front; clear operating instructions; three-position switch visible through inspection window.
  • Reduced footprint and maintenance: gas insulation retains compact size and lowers life-cycle maintenance requirements.
  • High environmental adaptability: suitable for high altitude, cold, humid, salt-mist and polluted environments.


Product structure and functional compartments
Secondary meter compartment: for ammeter, voltmeter, protection devices and centralized secondary terminals.
Live display: indicates live cable input/output status.
Gas-pressure gauge: displays safe pressure range; optional alarm contact for low-pressure interlock.
Operation switchgear: provides switch status indications and printed operating instructions.
Gas tank compartment: welded stainless-steel sealed design with IP67 protection.
Pressure relief compartment: for cable and CT installation and as an arc-pressure relief path to cable trench.
Cable compartment front door: removable access to cable compartment; compartment connections via inner-cone side or outer-cone top depending on configuration.

Operation
  • Preparation: use specified handle; confirm cable compartment front door installation and correct HV cable and secondary circuit connections.
  • Power-on: ensure CB/load switch is open; move three-position switch through earthing-open → open → isolation → closing sequence as per instructions; charge mechanism and close CB/load switch by closing knob. Mechanical interlocks prevent incorrect sequences.
  • Power-off: rotate closing knob to open CB/load switch; move three-position switch from isolation closed to open with handle.
  • Inspection: after confirming cable compartment de-energized, move three-position switch and open front door for inspection per procedure.


Interlock logic
  • Cable compartment front door can open only when earthing switch is closed and CB/load switch is open.
  • Earthing switch cannot be operated when front door is open.
  • Isolation and earthing switches cannot be operated when CB/load switch is in closing position.
  • CB/load switch cannot be operated when isolation or earthing switches are being operated into forbidden positions.
  • Cable compartment front door can be closed only when CB/load switch is in closing position.


Technical specifications
  • Model: XGTD8-12
  • Rated voltage: 12 kV
  • Rated current: 630/1250 A (configurations) ; 630 A for certain units
  • Rated frequency: 50/60 Hz
  • 1 min power-frequency withstand voltage: 42 kV
  • Lightning impulse withstand voltage (peak): 75 kV
  • Rated short-circuit breaking current: 20/25 kA
  • Rated short-circuit making current (peak): 50/63 kA
  • Rated short-time withstand current (4 s): 20/25 kA
  • Main circuit resistance per phase: ≤160 µΩ
  • N2 gas rated operating pressure: 0.02 MPa
  • Mechanical life: CB/Load switch 10000 operations; Three-position switch 5000 operations
  • Internal arc (IAC) rating: 25/1 (kA/s)
  • Annual N2 leak rate: ≤0.1%
  • Protection degree: IP67 (gas compartment); IP4X (others)

Catalogs

No catalogs are available for this product.

See all of Ningbo Tianan (Group) CO.,Ltd.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.