Single-phase transformers

Primary current: 400 A - 2,000 A
Frequency: 50 Hz - 60 Hz

Current transformer - TAC054 - 54x34mm Suitable for insulated bars

Primary current: 200 A - 8,000 A
Frequency: 50 Hz - 60 Hz

selfestinguishing thermoplastic material - UL94-V0 operating frequency - 50-60 Hz insulation reference voltage - 0,72 kV test voltage - 3kVx1'50 Hz insulation - dasse E protection degree - IP 20 continuous overcurrent - 1,2 In rated ...

Primary current: 800 A - 5,000 A
Frequency: 50 Hz - 60 Hz

selfestinguishing - thermoplastic material - UL94-V0 operating frequency - 50-60 Hz insulation reference voltage - 0,6 kV test voltage - 3 kV x 1'50 Hz insulation - dasse H protection degree - IP 00 protection degree with terminal ...

Primary voltage: 0 V - 72,500 V
Secondary voltage: 0 V - 350,000 V

Main advantages Performance and overload Design studied to optimize any installation requirement. Silence High efficiency materials and geometry to reduce noise emission in quiet areas. Eco+POWER Expressly studied to satisfy ...

Primary voltage: 0 V - 245 V
Secondary voltage: 0 kV - 1,050 kV

... high voltage transformers suitable for electrical generation, transmission and distribution applications: Transformers GSU (Generator Step-Up): used to connect the generator voltage level up to the ...

Primary current: 0 A - 100,000 A
Primary voltage: 0 V - 170,000 V
Secondary voltage: 0 V - 750,000 V

... Rectifier transformers are manufactured according to the experience and the high technical know-how of SEA in the industrial sector. Multiple secondary LV windings, variable flux regulation by booster or by autotransformer. ...

Primary current: 150 A - 1,500 A

Description Transformer range from 150 to 1,500 A Secondary 250 mA Three ranges in the same transformer. Compatible with the MC product range from CIRCUTOR. Applications In installations ...

Electric power: 0.05, 0.4 W

PICO surface mount units utilize materials and methods to withstand extreme temperatures of vapor phase, I.R., and other reflow procedures without degradation of electrical or mechanical characteristics. Specifications MIL-PRF-27: ...

Electric power: 0.125, 0.015, 0.01, 0.02 W

PICO surface mount units utilize materials and methods to withstand extreme temperatures (220º C) of vapor phase, I.R., and other reflow procedures without degradation of electrical or mechanical characteristics. Specifications MIL-PRF-27: ...

Electric power: 0.062 W - 0.4 W

PICO surface mount units utilize materials and methods to withstand extreme temperatures of vapor phase, I.R., and other reflow procedures without degradation of electrical or mechanical characteristics. Specifications MIL-PRF-27: ...

Primary current: 14.2 A - 45.3 A
Electric power: 3.15 W - 10 W
Primary voltage: 230 V

• Isolating transformers for medical IT systems • Built-in temperature sensor • Shield winding • Insulated mounting brackets • Also available as an energy-efficient variant The transformers ...

Primary current: 0.6 A - 4.6 A
Electric power: 0.12 W - 1 W
Primary voltage: 230 V

• Operating-theatre-light transformers • Voltage adaptation to primary and secondary side • Shield winding • Insulated mounting brackets • Reinforced insulation The transformers of the ESL0107 ...

Primary current: 0 A - 1,800 A

... Measurement Transformer for remote management in Low Voltage Open-core Current Transformers– CT80II ABR Open core current transformers don´t need shutdown ...

Electric power: 10 W - 50 W

P025 Planar Transformers (10W to 50W) Patented (U.S. PAT. 7,129,809) design with superior thermal management Rated power 10W-50W / Frequency range 300-500kHZ Surface mount (SMD) or through hole (TH) Topology - Forward ...

Primary current: 20 A

The CSB is a custom current transformer that is manufactured by standex-Meder electronics. It is built with a primary and secondary winding whose controls are incorporated into a computer. This compact device is less ...

The Standex Custom Current Transformer are ideal for use in electronic installations found in industrial and commercial industries.

Output power kVA: 7.5 kVA
Primary voltage: 220 V
Secondary voltage: 220 V

... of Power Isolation transformer: SGGF isolation transformer is used to solve the power grid problems which are caused by the photovoltaic power generation,such as harmonic, flickering, DC magnetic bias, ...

Output power kVA: 60 kVA
Primary voltage: 220, 380 V
Secondary voltage: 220, 380, 600, 800, 1,000 V

Power isolation transformer refers to the input and output winding with electrical isolation transformers, it can avoid accidental hit at the same time transformer can isolate the former ...

Electric power: 15 kVA
Primary voltage: 110 V - 480 V
Secondary voltage: 20 V - 380 V

... series: 1.Power range: ≤15KVA. 2.Phase: single phase 3.Primary voltage: 480V/460V/440V/420V/415V/400V/380V/230V/208V/110V 4.Secondary voltage: 20V/24V/25V/110V/220V/380V 5.Frequency: ...

Primary voltage: 220 V
Secondary voltage: 220, 380, 440 V

The PTU-03 Isolation Transformer Module is an optional add on accessory for the ECU-02 or AVR. Compatible with single and three phase voltage and isolates the primary and secondary voltage. ...

Primary current: 3.15, 6.3 A
Electric power: 0.1 kVA - 0.4 kVA
Primary voltage: 208 V - 480 V

ATS Transformer Module is designed with pluggable terminal block to simplify ATS installation. Best use for system voltage 208 to 480 Vac. For system voltage from 208 to 480 Vac Modular design, simplify ATS ...

Electric power: 0.04 kVA - 5 kVA
Primary voltage: 230, 400 V
Secondary voltage: 24 V - 230 V

Products in the LH-series are single-phase safety isolating / isolation transformers, which are protected against direct contact. Products in the LH-series are designed with maximum versatility ...

Electric power: 2 kVA - 5 kVA
Primary voltage: 230, 400 V
Secondary voltage: 24 V - 230 V

Trafox Transformers LH-series is an IP2X protected, 1-phase low voltage isolation transformers. It includes two primary windings of 230V and 400V which reduces the number of storage titles ...

Electric power: 0.2 kVA - 0.55 kVA
Primary voltage: 230 V
Secondary voltage: 230 V

Encapsulated mobile single-phase electrostatically shielded transformers are suitable for equipment which need to be protected from mains power transients and interference. The transformers ...

Primary voltage: 1 V - 1,000 V

ETR Series Transformers are between 1 KVA - 500 KVA power range, as 1 or 3 phases being realized specially in accordance with the requests of customers as star, scott, delta and zigzag connections mono-phase ...

Primary current: 0.01 A - 3,000 A
Electric power: 30 W - 30,000 W
Primary voltage: 230, 400 V

Compliant with standard EN 61558-2-6 • Standard voltages • Other voltages available on request • Electrostatic screen available on request • Ambient temperature 40 °C • Protection rating IP00 • Electrical protection rating I • ...

Primary voltage: 230 V
Secondary voltage: 12 V

Compliant with standard EN 61558-2-6 • Standard voltages • Electrostatic screen available on request • Ambient temperature 40 °C • Protection rating IP00 • Electrical protection rating I • Thermal insulation class B • Fixing brackets ...

Primary voltage: 230, 400 V
Secondary voltage: 230, 115 V

• Compliant with standard EN 61558-2-4 • Standard voltages • Other voltages available on request • Electrostatic screen available on request • Ambient temperature 40 °C • Protection rating IP00 • Electrical protection rating I • ...

Electric power: 50 W - 2,000,000 W
Primary voltage: 1 V - 1,000 V
Secondary voltage: 1 V - 1,000 V

... and 3-Ph insulation transformers are designed to meet the following priority requirements: Anti-jamming screening between the primary and secondary windings Cooling: air type Power: up to 2000 kVA Frequency: up to ...

Primary current: 15,000, 40,000 A

HIGH ATTENUATION ISOLATION TRANSFORMERS RS SERIES WITH OVERVOLTAGE PROTECTION IREM Isolation Transformers of the RS series are characterized by: high attenuation of common mode disturbances, achieved ...

Primary current: 100, 5 A

Applications „ Balanced systems: network analyzers, automatic power factor correction systems (PFCs) Features „ Connection terminal with cover (IP20) for universal connection, no fork needed „ Bus bar or din rail mounting, included complete ...

Primary voltage: 230, 400 V
Secondary voltage: 0 V - 115 V

The Safety Transformer is an isolating transformer intended for supplying a circuit at a maximum 50 V with safety extra low voltage. Insulating transformer has primary and secondary windings ...

Primary voltage: 230, 400 V
Secondary voltage: 0 V - 115 V

Generally about transformers The transformers must be protected against possible overloads and short circuits. Our transformers belong to the non-short-circuitproof type and so they must ...

Electric power: 1 kVA

Single-phase safety isolating transformer Used in connection with Iso D4-Zs (NT689) insulation monitor for a continuous control of the insulation towards ground Primary voltage ...

Primary current: 0.08 A - 1.35 A
Electric power: 0.03 kVA - 0.25 kVA

Transformers have to be flexible because different situations require different voltages. Murrelektronik's product range offers this flexibility, no matter if it's an isolation transformer, control transformer, ...

Primary current: 0.17 A - 1.17 A
Electric power: 0.03 kVA - 0.25 kVA

Transformers have to be flexible because different situations require different voltages. Murrelektronik's product range offers this flexibility, no matter if it's an isolation transformer, control transformer, ...

Primary current: 0.11 A - 2 A
Electric power: 0.03 kVA - 25 kVA

Transformers have to be flexible because different situations require different voltages. Murrelektronik's product range offers this flexibility, no matter if it's an isolation transformer, control transformer, ...

SINGLE PHASE POWER TRANSFORMER Single Phase Power Transformer (1-20000VA) ► Core type: EI、CD、O、UI… ► Application: Industry PS、Medical ...

Primary voltage: 110 kV

Classification: Single phase oil-immersed power transformer: D11-M

Output power kVA: 0.03 kVA - 2.5 kVA
Primary voltage: 230 V - 400 V
Secondary voltage: 24 V - 230 V

STM - SINGLE PHASE ISOLATING TRANSFORMERS IP00 Modern and economical make of general purpose isolating and/or safety transformers for building into installations and ...

Output power kVA: 0.01 kVA - 0.2 kVA
Primary voltage: 24 V - 500 V
Secondary voltage: 24 V - 500 V

Transformers predominantly intended for assemblies of powers supplies of electronic equipment with several connection options. They are small and compact (cast resin), they feature increased mechanical robustness and ...

Output power kVA: 0.15 kVA - 5 kVA
Primary voltage: 400, 230 V
Secondary voltage: 230, 24 V

... EOR - TOROIDAL TRANSFORMERS FOR ELECTRICAL RAIL HEATING SYSTEMS Single-phase toroidal transformers intended for power supply of railway turnouts heating systems. Cast ...

Electric power: 0.025 kVA - 0.63 kVA
Primary voltage: 230, 400 V
Secondary voltage: 230, 400 V

ENTES isolating transformers ensure the safe operation on the secondary side by isolating them from the primary voltage. Input output voltages of isolating transformers are fixed (230 or 400V). The electrical ...