Heatless adsorption compressed air dryer KA-MT 10-95 series
single-stagecompact

heatless adsorption compressed air dryer
heatless adsorption compressed air dryer
heatless adsorption compressed air dryer
heatless adsorption compressed air dryer
heatless adsorption compressed air dryer
heatless adsorption compressed air dryer
Add to favorites
Compare this product
 

Characteristics

Technology
heatless adsorption
Number of stages
single-stage
Other characteristics
compact
Capacity

Max.: 940 m³/h
(33,195.79 ft³/h)

Min.: 105 m³/h
(3,708.04 ft³/h)

Working pressure

Max.: 16 bar
(232.06 psi)

Min.: 4 bar
(58.02 psi)

Operating temperature

Max.: 50 °C
(122 °F)

Min.: 5 °C
(41 °F)

Ambient temperature

50 °C
(122 °F)

Weight

Max.: 698 kg
(1,538.8 lb)

Min.: 161 kg
(354.9 lb)

Dew point

-40 °C
(-40 °F)

Description

The Parker Zander KA-MT 35-95 range of heatless adsorption dryers with integrated activated carbon stage are designed to dry industrial compressed air reliably and efficiently down to a pressure dew point of -70°C with a remaining oil content of 0.003 mg/m³. The units are compact and are designed to be installed free-standing. KA-MT series compressed air dryers have an integrated activated carbon stage for the removal of oil vapours and GL series pre- and post filtration, they are capable of volume flows up to 940 m³/h in a system operating at 7 barg (100 psig). Features • Pressure dew points down to -70°C • Volume flows up to 940 m³/h @ 7 barg (100 psig) • Pre- and post filters installed as standard • Fully dewpoint dependent control is possible as an option • Remaining oil content of 0.003 mg/m³ Benefits • Highest quality air • Energy efficient • Dry air means zero corrosion Energy Savings Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available as an option. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur.

Catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

ACHEMA 2024
ACHEMA 2024

10-14 Jun 2024 Frankfurt am Main (Germany)

  • More information
    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.