Aalborg aluminum flow meters
Volumetric flow rate: 0.2 l/min - 16 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 160 bar
... interruption output signal: Pulse signal The SIKA gearwheel volume sensors are suitable for the detection of volumetric flows with high as well as varying viscosity in the following areas of application, among ...
SIKA
Volumetric flow rate: 0 l/min - 200 l/min
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 240 bar
... the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The bearing consists of ball and plain bearings. The measuring principle does not cause any ...
... Mobile flow measurement with TRDI ADCP-sensors for flow velocities up to 6 m/s Center Hull Length: 152.5 cm (60“) Overall Width: 122 cm (48“) Weight: 13.6 kg (30 lbs.) Hull Material: High-Impact, UV-Resistant ...
... allows flow measurements even and especially in the border area. Optimised: The Q-Boat 1250 offers enough space to accommodate the ADCP sensor (optional StreamPro, RiverPro, RiverRay) and other components, such as a ...
Process temperature: -20 °C - 350 °C
Process pressure: 25 bar
Precision: 1, 1.5 %
YUNYI flow meter sensor, Intelligent integrated vortex flow meter is a volumetric flow meter that measures the volumetric flow ...
Xi'an Yunyi Instrument Co., Ltd.
Process temperature: -30 °C - 160 °C
Process pressure: 0 MPa - 2.5 MPa
Precision: 0.5, 1 %
This flow meter transducer is inline measurement for long- term . The convertor and transducer are installed fixing on the pipe , with the advantages of small size , low cost and easy operation . Water ...
Xi'an Yunyi Instrument Co., Ltd.
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.2 %
This flow meter can be virtually applied to a wide range of measurement. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, ...
Xi'an Yunyi Instrument Co., Ltd.
Features : Suitable for clean air. Resistant to high pressure and high temperature. Sensor type : Thermal mass flow sensor Measuring range : 0 ... 90 m/s Output : 0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V / ...
Volumetric flow rate: 0.2 m³/h - 800 m³/h
Process temperature: -20 °C - 80 °C
Process pressure: 25 bar
The RIF200 is a turbine flow meter with an integrated display on the measuring body. It is designed to measure low-viscosity, impurity-free liquids, and its stainless steel structure ...
Riels Instruments
Volumetric flow rate: 0.2 m³/h - 800 m³/h
Process temperature: -20 °C - 80 °C
Process pressure: 25 bar
The RIF200 is a turbine flow meter device. This product was developed for measuring low-viscosity liquids that are free of impurities. The stainless steel construction provides exceptional ...
Riels Instruments
Volumetric flow rate: 2 l/min - 1,200 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 35 bar
... resettable. This range of flow meters has the capability to install specially designed oval wheels for high viscosity liquids (above 1000 cps). These meters find application in three ...
Riels Instruments
Volumetric flow rate: 14 l/min
Process temperature: 10 °C - 50 °C
The hybrid flow-bubble sensors of the series SONOFLOW CO.56 Pro V2.0 and SONOFLOW CO.56 combine accurate flow measurement and reliable air bubble detection in liquid filled medical tubing. They feature ...
Process temperature: -30 °C - 70 °C
... new AI.ERadar Fseries radar gauge is suitable for the measurement of 3 variables: level, water surface speed and consequent flow measurement. It is available in 3 versions according to the depth of the channel on which ...
ASIT ITALIA
Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar
Electromagnetic induction flow meter Suitable for conductive fluids Size from DN 10. to DN 2200 Flanged / Threaded UNI-ISO-ANSI Electrodes in SS316L-Hastelloy C-Titanium-Monel-Tantalio-Tungsten Internal ...
ASIT ITALIA
Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar
Model AI.MF1000R Electromagnetic induction flowmeter Suitable for conductive fluids Size from DN 10. To DN 2200 Flanged / UNI-ISO-ANSI threaded Electrodes in SS316L-Hastelloy C-Titanium-Monel-Tantalum-Tungsten Internal ...
ASIT ITALIA
Process temperature: -40 °C - 150 °C
Repeatibility: 0.2 %
Flanged ultrasonic flow meters provide ease of use with stable flange mounting. It has the same feature as online / portable ultrasonic flow meters in principle of operation. ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Repeatibility: 0.2 %
... Portable ultrasonic flowmeters with carrying case, coupling cream, mounting apparatus, long battery life, user manual are ideal devices for on-site portable flow measurement. This model can operate ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: -30 °C - 160 °C
Precision: 1 %
... Ultrasonic flowmeter is improved for long-term online measurement with wide measuring range. It is produced as converter protection class IP67 and sensor protection class IP68. It is suitable for use in many liquid measurements. Ultrasonic ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Process temperature: -30 °C - 80 °C
Precision: 2, 1 %
60GHz radar flow meter is developed based on PCR radar measurement technology. The flowmeter is made of pure aluminum material and wireless transmission (4G and Nb-IoT) ...
Holykell
Volumetric flow rate: 0.6 m³/h - 200 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 16, 10, 6, 40, 25 bar
... gas flow meter is also called Roots flowmeter. It is mainly used for high-precision measuring instruments for continuous or intermittent measurement of gas or liquid flow ...
Holykell
Volumetric flow rate: 1 m³/h - 3,600 m³/h
Process pressure: 1.6 MPa - 16 MPa
Precision: 1.5, 1 %
Precession vortex flow meter adopts micro-processing technology, which has the advantages of strong function, wide flow range, simple operation and maintenance, and convenient installation ...
Holykell
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar
VSI+ flowmeters measure the volume flow of the medium according to the gearwheel principle. A gearwheel pair fitted very precisely in the housing forms the measuring unit. The rotation of the measuring ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
Our VS gear flow meters offer unbeatable performance, linearity and resolution for most accurate measurement of clear, viscous liquids according to the gearwheel principle. A gearwheel pair adapted ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
... viscosity oil or viscous resin - RS flow meters are the ideal solution for precise flow measurement. Thanks to various bearings, tolerances, materials, coatings, electronics and resolutions, ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0.1 l/min - 40 l/min
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 20 bar
... attained by the float in its tapered flow tube is directly related to a calibrated scale with the flow being read from the centre of the ball. from the centre of the ball. This range of flowmeters ...
Filton Process Control Engineering
Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar
... with kinematics viscosity of 1.5 cSt to 6 cSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter ...
Technoton
Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar
... with kinematics viscosity of 1.5 cSt to 6 sSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter ...
Technoton
Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar
... cSt to 6 cSt can be measured by DFM. DFM fuel counter is an autonomous tool for direct fuel consumption measurement, which can be used without additional devices for data logging. The fuel counter ...
Technoton
Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar
... consumption of individual machines and analyze your leakage flows with just one measuring device. Advantages of the VA 525 flow sensor: - Measurement of mass flow rate, output of ...
Volumetric flow rate: 909 m³/h - 1,195 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 40 bar
Flow meters for compressed air as well as various technical gases Reduce your energy costs and increase your sustainability with the VA 521. Monitor the consumption of each machine and analyze your ...
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... VPFlowScope M can be installed under pressure and measures (bi-directional) flow, pressure, temperature, and total flow simultaneously. The flow meter is an all-in-one ...
Volumetric flow rate: 0 m³/h - 1,000 m³/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 Pa - 3,500,000 Pa
... consumption of machines, cost allocation, and pressure loss monitoring. It measures (bi-directional) mass flow, temperature, pressure, and total flow which is key data for point of use compressed air ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 16 bar
Precision: 2 %
... with this 4-in-1 sensor: measure (bi-directional) flow, pressure, temperature, and total flow simultaneously. The patented VPFlowScope® DP is the ultimate measurement tool for saturated compressed air ...
Volumetric flow rate: 1.4 l/min - 2,500 l/min
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 350 bar
... measurement possible with forwards and reverse flow ● For cost-sensitive applications ● Simple to use ● Cable outlet infinitely rotatable Characteristics The VHS flow transmitter measures the ...
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %
... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously ...
Eastern Instruments
Mass flow rate: 100 lb/h - 500,000 lb/h
Volumetric flow rate: 1.7 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow BWS meter is a gravimetric solids flow meter that will accurately measure the flow of product that continuously passes through it. Due to its simple, ...
Eastern Instruments
... duct runs (upstream or downstream). They provide flow conditioning and accurate air flow measurement, regardless of placement and duct obstructions, as they combine flow-straightening ...
Eastern Instruments
Volumetric flow rate: 6.5 l/h - 480,000 l/h
Process temperature: -10 °C - 90 °C
Process pressure: 10 bar
... and gas flows. The Trogflux float-type flow meter is used in the following industries: • Plant and mechanical engineering • Construction machinery and equipment • Water and wastewater Advantages ...
MECON
Volumetric flow rate: 10 l/h - 60,000 l/h
Process temperature: -40 °C - 150 °C
Process pressure: 16, 10 bar
Flow measuring and volume totalization of condensated steam and fuel, tank filling. Widely used in oil industry, measurement of honey, chocolate, paint, resin, inks, etc. Materials Body: EN 1.4404 (AISI 316L), PVC, ...
Process temperature: 0 °C - 80 °C
... protection installation, automotive industry and energy plants. Suitable for flow measurement of liquids such as sea water, kerosene, gas-oil, petrol, oils? Technical specifications Flow speed range: ...
Volumetric flow rate: 0.5 l/h - 36 l/h
Process temperature: 0 °C - 120 °C
Process pressure: 0 bar - 100 bar
... 0,5 - 36 l/h ... 150 - 2500 l/min liquid Connection: G 1/8 ... G 4 female Flange: DN 25 ... DN 100, ASME 1"... 4" Material: aluminum , st. steel Max. pressure: 100 bar Max. temperature: 120 °C Accuracy: ± 0,2 ... 1% of ...
KOBOLD INSTRUMENTATION
Volumetric flow rate: 15 l/min
Process temperature: 10 °C - 50 °C
Process pressure: 50 bar
Mechanical oval gears flow meter, with body in aluminium, for oil and antifreeze, with two totalizers Mechanical oval gears flow meter, for oil and antifreeze, with ...
Flexbimec
Volumetric flow rate: 20 l/min - 150 l/min
Process pressure: 25 bar
Repeatibility: 0.5 %
Flexbimec
Volumetric flow rate: 20 l/min - 150 l/min
Process pressure: 25 bar
Precision: 0.5 %
Flexbimec
Volumetric flow rate: 0.1 l/min - 90 l/min
Process temperature: -20 °C - 160 °C
Process pressure: 10 bar
Flow monitor and indicator for oil viscosity compensated special liquids installation in any orientation Operation: The flow monitors and ...
Volumetric flow rate: 1 m³/h - 9,048 m³/h
Process temperature: -40 °C - 85 °C
Precision: 0.5 %
... LEKTRA presents a new type of electromagnetic flowmeter with plastic sensors: RKmag. Because of its particular inner shape the mounting of the unit requires no straight pipe lengths before and after the meter. ...
Volumetric flow rate: 0 m³/h - 787.5 m³/h
Process temperature: -40 °C - 150 °C
Repeatibility: 0.1 %
MID certified flow meter Power supply 85÷265Vac; 12Vdc; 20÷30Vdc/Vac Configuration and displaying via VL701with O-LED display Description The RPmagM product line is suitable for multiple applications ...
Volumetric flow rate: 0 m³/h - 24,000 m³/h
Process temperature: -40 °C - 80 °C
Precision: 1 %
... Datalogger on SD card Backlit display Battery life: max 6h MODBUS RTU digital communication Description The SGM-101H flow measurement system consists of a digital converter and two ultrasonic transducers. ...
Process temperature: -40 °C - 70 °C
MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas ...
PIETRO FIORENTINI
Process temperature: 150 °C
MULTIPHASE FLOW METERING Flowatch HS The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas ...
PIETRO FIORENTINI
Process temperature: 150 °C
... water and gas flow rates in Wetgas flow regimes (Lockhart-Martinelli < 0.3) without any separation or moving parts. It implements the latest state of the art technologies such as the Flow ...
PIETRO FIORENTINI
... series gas turbine flow meter is equipped with mechanical counter it’s a kind of meter don’t run slowly with high flow measurement accuracystrong anti-magnetic ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining