Volumetric flow rate: 50 m³/h - 500 m³/h
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 1 bar
... pressure, and flow measurement in plants & labs where certain accuracy is required. MATERIALS OF CONSTRUCTION Metering Tube: : Special uniform bare thick walled borosilicate glass tube Packing: Teflon / Neoprene Casing: ...
Volumetric flow rate: 0 m³/h - 1,140 m³/h
Process temperature: 200 °F
Process pressure: 100 psi
FLO-METER™ FLOW MEASUREMENT FOR GASES AND LIQUIDS The UPC-Marathon Flo-Meter™ is a rugged and cost-efficient flow meter for gases and liquids. Its ...
Volumetric flow rate: 0 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 25 bar
... Measuring accuracy - В±1% Temperature range,В°C - -40 – +85 Maximum flow rate in l/h - 500 Output interface - pulses, RS232, RS485, K-Line, CAN Seal rating - IP 67 Flow meter ...
Mechatronics
Volumetric flow rate: 25 l/min - 3,000 l/min
Process pressure: 10 bar
... positive displacement flow meters, positive isplacement vane flow meters, Characteristic: Excellent stepless fine-tuning device allows plus-minus calibration of flowmeter; High ...
Zhejiang Jiasong Technology Co., Ltd.
Volumetric flow rate: 1 l/h - 580 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 38 bar - 400 bar
... FLOMEC® OM Series Oval Gear meters provide exceptional accuracy and repeatability in a wide range of applications measuring clean liquids. Direct volumetric measurement from the positive displacement design gives you ...
FLOMEC
Process temperature: -30 °C - 160 °C
... velocity of flow speed. Then, converter could calculate the flow speed based the transmit time. Modular Type Ultrasonic Flow Meter Advantages and Disadvantages 1. ...
Q&T Instruments
Process temperature: 4 °C - 57 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
The Q-Eye PSC area velocity flow meter is designed for stationary flow monitoring of slightly to heavily polluted media in full or partially full pipes or open channels. It uses advanced ...
Process temperature: -20 °C - 100 °C
Process pressure: 16 bar
Precision: 1.5, 0.3 %
... mass flow meter measurement technology, the TGF200 series micro gas flow meters provide a low-cost option for correctly measuring dry, non-corrosive gas. This range is ...
Process pressure: 145 psi - 232 psi
Electromagnetic flowmeter No moving parts, no restriction to flow (load loss is irrelevant). Bi-directional flow metering. Compact and remote versions (cable length up to 30m). Intuitive ...
The FLODEM electromagnetic flow meters are based our decades of experience. They've are highly reliable, easy to operate and very suitable for harsh conditions.
SMAAT TECHNIQUES SAS
Volumetric flow rate: 0.6 m³/h - 70,000 m³/h
Process temperature: 80, 180, 150, 100 °C
Precision: 0.2 %
Electromagnetic flowmeter consisting of a sensor and a transmitter. The flowmeter is used to measure volumetric flowrate for conductive liquids and pulps. Several output signals are available. ...
Volumetric flow rate: 0.1 l/min - 8 l/min
Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 50 bar
For precise flow rate monitoring in oil circulation systems The SFZM gear wheel indicator is an oil flow monitoring device. It offers robust flow monitoring of lubrication ...
Volumetric flow rate: 0.1 l/min - 40 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 16 bar
... circulation systems SKF Variolub SMD flow meters are designed to meter and monitor the flow in oil circulation lubrication systems. They are offered in three different ...
Volumetric flow rate: 0 l/min - 56 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 15 bar
... use in oil circulation systems SKF Safeflow flow meters control and indicate the flow rate. Each flow meter can be calibrated individually according ...
Volumetric flow rate: 0 l/min - 2,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 ...
Volumetric flow rate: 0 l/min - 4,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: -40 °C - 80 °C
Precision: 0.5 %
... Series 1" DIGITAL FLOW METER are suitable for flows between 6 - 120 L/min (1.59 - 31.70 GPM), providing highly accurate flow measurement performance. The MX Series offers ...
Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: -40 °C - 80 °C
Precision: 0.5 %
... Series 1" DIGITAL FLOW METER are suitable for flows between 6 - 120 L/min (1.59 - 31.70 GPM), providing highly accurate flow measurement performance. The MX Series offers ...
Process temperature: 70 °F
Repeatibility: 0.5 %
... , black anodized forged aluminum body with wraparound window for full 180º visibility of the flow tube. The F65 and F150 flowmeters are available with aluminum, brass ...
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 3.5 bar
Precision: 3 %
Flow meter for streaming liquids according to the measurement principle of a swashplate. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), RME, vegetable oil Plastic/aluminum ...
Volumetric flow rate: 25 l/min - 3,000 l/min
Process pressure: 10 bar
Repeatibility: 0.05 %
... adjustment of the meter High accuracy and repeatability over the widest range of flow; Superior accuracy at constant flow Low maintenance, no metal-to-metal contact in measuring chamber, ...
Yongjia Jiangbei Yiben Machinery Company
Please specify:
Help us improve:
remaining