- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Industrial fan >
- Air Control Industries
Air Control Industries industrial fans
Air flow: 250 m³/h - 3,000 m³/h
The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...
Air flow: 250 m³/h - 3,000 m³/h
Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...
Air flow: 21,000 m³/h - 39,800 m³/h
This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure ...
MET MANN
Air flow: 21,000, 39,800 m³/h
... stale air or vapors in industrial buildings, warehouses, farms, greenhouses, etc .. The extraction capacity is 21,000 and 39,800 m3 / h. The outer casing is made of galvanized steel and incorporates a premium propeller ...
MET MANN
Air flow: 7,200, 5,500, 3,600 m³/h
Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30%. Its use can be commercial and / or ...
MET MANN
Air flow: 0.07 m³/s - 0.319 m³/s
Diameter: 200 mm
Rotational speed: 2,410, 2,305, 1,540, 770 rpm
... rotor motor, provide low specific fan powers and stepless speed control without tonal noise generation. Controllability EC motors provide precise speed control via potentiometer, BMS or Elta Fans ...
ELTA FANS
Air flow: 0.103 m³/s - 0.241 m³/s
Diameter: 250 mm
Rotational speed: 1,795, 1,410, 800 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.241 m3/s • Static pressures up to 86 Pa • IE5 Highly efficient, EC motors • Fully speed controllable • Suitable for operating temperatures ...
ELTA FANS
Air flow: 0.33, 0.273, 0.221 m³/s
Diameter: 250 mm
Rotational speed: 1,460 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.33 m3/s • Static pressures up to 63 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 1,080 l/min
Diameter: 48 mm
Rotational speed: 19,400 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 100 m³/h - 450 m³/h
Rotational speed: 2,900, 1,450 rpm
Noise level: 45 dB - 67 dB
Produced completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 500 m³/h - 1,600 m³/h
Rotational speed: 1,450, 950, 2,900 rpm
Noise level: 57, 45, 70 dB
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 720 m³/h - 2,000 m³/h
Extract Fan Low Pressure Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically ...
PLASTIFER
Air flow: 100 m³/h - 19,000 m³/h
Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...
Diameter: 300 mm - 1,102 mm
F plastic fans are manufactured assembling variable pitch, slightly sickle profile blades with a light aluminum alloy hub. The fans are the best choice to suit a variety of applications which require ...
... °. C-ALU fans can produce a sucking or blowing air flow. C-ALU impellers are thought to be employed in high-temperature and corrosive environments. Typical applications where they can be used are: dryers and kilns, ...
Air flow: 11.32 l/min - 122,742.65 l/min
Diameter: 30 mm - 220 mm
These powerful, low-noise fans come with excellent energy efficient ratings and are particularly suitable for industrial applications and electronic components where high volumetric air ...
Air flow: 48 l/min - 1,019 l/min
DC fan blowers are typically used in projectors, humidifiers and household appliances. Supply voltage - 12 V, 24 V
Air flow: 406 l/min - 2,509 l/min
Inspired by the dimples in golf balls, the "Golf" fan range with dimpled impeller blades was developed. The dimples help reduce air drag and turbulence, thus increasing the volumetric air flow while ensuring low-noise ...
Choose the right fan adapted to your installation and filters. Description An efficient filtering system needs to use the right fan adapted to your installation. Airflow, velocity, power, noise level ...
Air flow: 13,500 m³/h
Equalizes the temperature in buildings with high ceilings Ceiling fans are used primarily to equalize the temperature in rooms with high ceilings, such as industrial and warehouse buildings, gymnasiums, ...
Air flow: 19,300 m³/h
... 30 %. Industrial ceiling fan ICFX is of high quality and maintenance free with a long service life. Easy installation and low energy consumption gives a very short pay-off period, in many instances ...
Scroll casing with direct drive without a coupling, single inlet Product Description Robust industrial versions Long service life, easy to maintain High efficiency, quiet operation Custom solutions at series production ...
Nicotra Gebhardt
Air flow: 130 m³/h - 2,200 m³/h
The Secomak range of direct drive centrifugal fans and blowers are designed to provide high volume air flow up to 2200m³/hr. The fans are designed to easily integrate into any current system, but are ...
Air flow: 100 m³/h - 13,000 m³/h
Metal sheet steel fan complete with inlet and outlet flanges
The industrial fan Recube plug fan for extraction is a fan able to put the user in depression, so as to realize vacuum or depression in test chambers or extract air at ...
Rimor
... axial fan can be manufactured with the direct coupling technology if the fluid temperature does not exceed 110 ° C, while it can be built with the transmission technology for usages in which temperatures go up to 200 ...
Rimor
... solvent or humidity measurement systems inside the system. The Recube plug fan is a circuit of soundproof and insulated industrial fans with inverters. The Recube plug fan ...
Rimor
Exhauster packages are available for pneumatic conveying, aeration systems and industrial processes. You can specify your choice of components or simply tell us your air requirements, and let us do the work. Either way, ...
Air flow: 17,000 m³/h
Diameter: 250 mm - 630 mm
... . Free running impellers with EC motors are available depending on the size of different designs: GKHM fan built-in module GKHS fan built-in module with spider design GKHR motor impeller ...
Rosenberg Ventilatoren GmbH
Air flow: 60,000 m³/h
Diameter: 250 mm - 1,000 mm
... backward curved impellers • IEC standard motors in type 3 • can be installed in all positions • compact design Properties Fan module with motor mount and base frame. Screwed into the inlet cone and adjusted to ...
Rosenberg Ventilatoren GmbH
Air flow: 32,000 m³/h
Diameter: 500 mm - 1,000 mm
... emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones. Guard Serves as contact protection and for mounting the fan ...
Rosenberg Ventilatoren GmbH
Air flow: 4,800 m³/h - 99,500 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 955 rad.min-1 - 9,331 rad.min-1
Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation ...
Planetfan
Air flow: 5,470 m³/h - 24,405 m³/h
Diameter: 400 mm - 710 mm
Rotational speed: 1,500, 3,000 rpm
Wall-mounted fans for mounting on the walls of industrial and large-volume rooms. They transport air in low resistance installations. Often used to evacuate large quantities of warm air accumulated in ...
Planetfan
Air flow: 6,107 m³/h - 33,356 m³/h
Diameter: 400 mm - 1,000 mm
Rotational speed: 935 rad.min-1 - 1,440 rad.min-1
Axial fans for localised ventilation or stationary cooling. Built on a mobile frame with adjustable air discharge angle. Industrial design, for operation in production plants where workstations require ...
Planetfan
External fan units for asynchronous and direct current motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various ...
External fan units for servo motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various connection ...
Built-in axial fans up to 300 mm diameter -Multifunctional use industrial fan /axial fan -High volume flow -Small number of versions thanks to multi-voltage design ...
Air flow: 5,000 m³/h - 72,000 m³/h
Helione – Axial fans CE marking-compliant. Class F200 (200 °C- 120 min) and F400 (400 °C – 120 min) in accordance with EN 12101-3. Large range for car parks, commercial and industrial premises. Multiple ...
Centrifugal fans store significant amounts of energy when running, and if the fan is not correctly matched with the operating conditions the consequences for the plant operator can include excessive power ...
... Howden SX fan's acoustic output is up to 20 dB(A) lower than comparable conventional cooling fans and in many cases eliminates the need for expensive and bulky sound attenuation equipment. The blades ...
The E-Series fan blades have an integral shaft, are positioned on the fan hub-plate by aluminium blade supports and are fastened by U-bolts for simple field assembly and blade pitch adjustment.
Air flow: 0 ft³/min - 284,000 ft³/min
... centrifugal fan equipped with an airfoil wheel suited for supply and exhaust air and industrial applications. With energy efficient airfoil blades, the Design 10A fan provides reliable ...
CHICAGO BLOWER
Air flow: 0 ft³/min - 55,500 ft³/min
... free fan proven in a myriad of industrial applications. With its backward inclined wheel and square housing design, the SQB is efficient, economical and versatile. It is also quickly available through ...
CHICAGO BLOWER
Air flow: 0 ft³/min - 250,000 ft³/min
... Vane Axial Application Chicago's Design 47 Vane Axial Controllable Pitch Fans respond automatically to signal source based on changes in temperature, humidity, air flow, gas concentration and air ...
CHICAGO BLOWER
Air flow: 7,500 m³/h
Air flow: 6,000 m³/h - 40,000 m³/h
Industrial polypropylene vacuum serve as link to galvanic plants and the scrubber.
Air flow: 330 m³/h - 8,400 m³/h
... allowed 80°C or 150°C if a cooling fan is installed Belt Drive trasmission: Maximum fluid temperature allowed 90°C or 350°C if a cooling fan is installed In case of higher temperatures, some modifications ...
Stiavelli Irio
Air flow: 420 m³/h - 22,800 m³/h
... allowed 80°C or 150°C if a cooling fan is installed Belt Drive trasmission: maximum fluid temperature allowed 90°C or 200°C if a cooling fan is installed In case of higher temperatures, some modifications ...
Stiavelli Irio
Air flow: 95 m³/h - 32,400 m³/h
... cooling fan is installed Belt Drive or N8: Maximum fluid temperature allowed is 90°C or 350°C if a cooling fan is installed In case of higher temperatures, some modifications to the fan ...
Stiavelli Irio
IN LINE FAN IN LINE XPRO Efficient and energy-saving duct fan. Its removable motor block facilitates assembly and maintenance. IN LINE XPro is a duct fan that allows one or more ...
IN LINE XSilent fan: IN LINE XSilent is an efficient and silent duct fan thanks to its steel casing and 50 mm internal insulation. IN LINE XSilent is a duct fan that allows to ventilate ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining