AIR Logic control valves

DN: 10 mm - 50 mm
Pressure: 10 bar

• Control valve for pressure reduction • We obtain constant work pressures • Low vibration and behavior control • PVC, PP and PVDF materials • PTFE membrane, EPDM or FPM gaskets Advantage • ...

DN: 10 mm - 50 mm
Pressure: 10 bar

• Control valve for pressure reduction • We obtain constant work pressures • Low vibration and pressure control from 0.5 to 9 bar • PVC, PP and PVDF materials • PTFE membrane • PN10 ...

DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C

• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C

special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

A liquid or gas solenoid valve is used to control the flow of liquids or gases in an industrial automation system, irrigation systems, cooling systems, process control applications and ...

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... can open or close the valve in response to electrical commands. The type of mechanism can vary depending on the design of the valve, but often involves a shaft or lever that adjusts ...

DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C

... The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder mounting type shock ...

Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

This Exhaust Needle Valve controls the exhaust flow rate. The valve can be attached directly to a solenoid valve. Best suitable in case a cylinder, etc has no sufficient ...

DN: 4, 12, 10, 8, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 80 °C

PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. Clear (semitransparent) color used for the resin body makes it possible to check visually the fluid (liquid) inside. All ...

The M&J Expanding Gate Valve is a round body cast steel valve with a thru conduit in the open position and is normally manufactured in class 600 & higher. The M&J Compact Expanding Gate Valve ...

DN: 2 in - 84 in

The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...

DN: 2 in - 36 in

... emission control Applications Oil, Gas, Liquid Products & Secondary Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves ...

Pressure: 0 bar - 40 bar
Temperature: 95 °C

Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C

The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...

DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C

... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...

DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves ...

DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...

DN: 10 mm
Pressure: 0.2 bar

Front control valve, inlet and outlet copper tube 10x1mm, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: EN ...

DN: 10 mm
Pressure: 1 bar

Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: ...

DN: 10 mm
Pressure: 10 bar

Front control valve, inlet and outlet copper tube 10x1mm, for compressed air Needle headwork with fine regulation TECHNICAL FEATURES Media: Compressed Air Maximum pressure: 10 bar Fluid identification: ...

DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C

Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C

Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...

DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar

Athena Through-conduit gate valves - Designs utilize flanged and butt-weld end connections. - The full port bi-Directional flow capability minimizes pressure drop and turbulence. - Isolating valves ...

DN: 50 mm - 1,200 mm

... with the latest edition of API600 and ASME B16.34. All the gate valve provided with a drain valve at the lower part of the body used for tightness control & drain.

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Electric ball valve Body material: Stainless steel, Carbon steel End connection: RF, BW Operation: Electric

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...

DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...

Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min

DN: 150 mm - 180 mm

... precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05

DN: 9 mm

... 0-12mm high vacuum valve (3-way) Accessories: S540008 0-8mm high vacuum plug and control knob Viton® O-ring at tip 37.05 S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05

DN: 9 mm

... ® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at tip 28.40 S540008 0-8mm high vacuum plug and control ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The 21IA4T15GC is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator that can be rotated ...

DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.

DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Series of quick exhaust valves in nickel-plated brass and in stainless steel

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...

DN: 40 mm - 1,200 mm
Pressure: 2.5 bar - 16 bar
Temperature: -10 °C - 120 °C

Di Nicola manufactures single eccentric butterfly valves type lug, wafer and flanged in ductil iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- nickel NI resist , carbon steel ASTM 216 WCB / N + GP ...

Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C

The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 ...