AIR Logic control valves

The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off controlled electric ...

Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C

... -EAV902 series 3/2 way ball valves are actuated by electric current and have a tough AISI 316 stainless-steel build, available in versions including electric-actuated with on-off control ...

Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C

... T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, gas, oil and steam among others. The TORK wafer ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 120 °C

L or T ball Locking handle with integrated PLS (Praher Labelling System) Machined ball Cushion O-Ring for PTFE seat Double sealed shaft Simple upgrade to automatic actuation Connections - flange, fusion socket, fusion spigot, threaded ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -10 °C - 65 °C

Position feedback integrated in hand lever! Mechanical limit switch IP67 in AG-NI NO Mechanical in AG-NI NC, AU NO, AU NC on request Inductive NPN/PNP on request Namur on request Adjustable ...

DN: 6 mm - 9.525 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

Safety locking ring for handle PTFE ball seat Connection set (BSP, NPT) Assembling set Seal materials - EPDM, FPM Connections - female thread – male thread

DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C

... , Chemical & Petrochemical Industries, Coolant Control For Machine Tool, Fuel, Ink & Paint Dispensing, Industrial Compressor, Laundry Equipment,Nuclear Energy, Pollution Control Equipment, Process Control ...

Pressure: 0 bar - 10 bar
Temperature: -40 °C - 125 °C

Used in speed governing systems for cutting down flow of fuel when the speed limit is reached.

Pressure: 0 bar - 12 bar
Temperature: -40 °C - 125 °C

These valves are available in various sizes and orifices. The application is to cut off the fuel flow to fuel pump and thereby stopping the engine.

DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C

Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.

DN: 0.75, 0.5 mm
Pressure: 0 bar - 350 bar

Mechanical valve to control the cylinder’s position.

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

FLOW CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 1, 2 mm
Pressure: 0 bar - 88 bar
Temperature: -40 °C - 100 °C

The lockable isolation valve 3/2 way of the series AT is used to open the circuit, allowing in this way the air to flow from the entrance (A) D towards the exit (B). When turning the control ...

DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C

... pilot control allows on-site pressure adjusting. Application of Groove End Pilot Control Pressure Reducing Valve Our Groove End Pilot Control Pressure Reducing ...

DN: 1.5 in - 12 in
Pressure: 1 bar - 13 bar

Model DTR / DFR, Diaphragm pilot control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines ...

DN: 2.5, 1.5 in
Pressure: 2 bar - 7 bar

Model HRTL/HRTR, Fire Hydrant Pressure Reducing Valve, function similar to landing valve, attached in hydrant box serve as connector between pipeline and hydrant hose. Our Fire Hydrant Pressure Reducing ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...

Pressure: 17.2 bar

The FDV is a Fire Protection control valve for Deluge fire sprinkler systems, designed for installations in hazardous environments. The FDV-PC0 is a pressure control Deluge system, actuated ...

DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C

The RAF 7R flow rate control valve is line pressure hydraulically actuated, 3-W plastic pilot. Normally the valve is partly open to allow constante flow rate. The head loss across the ...

DN: 25 mm - 150 mm
Pressure: 0.8 bar - 10 bar
Temperature: 70 °C

The RAF 8R pressure sustaining control valve maintains a minimum upstream pressure, as set on the 3-W pressure sustaining plastic pilot, regardless of flow changes. The RAF 8R will fully open should upstream ...

DN: 10 mm - 40 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

2-way FF PVC with connection kit Version with threaded or to-be-glued connections

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43

DN: 20, 25 mm

3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...

DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -60 °C - 400 °C

... globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be assembled with ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 13 bar
Temperature: 0 °C - 170 °C

The ADCAPure V926A is a series of single seated two-way aseptic control valves with angle connections. These valves are designed to regulate and accurately control flow ...

DN: 0.5 in - 4 in
Pressure: 16 bar
Temperature: 0 °C - 170 °C

The ADCAPure V926H is a series of single seated two-way hygienic control valves with angle connections. These valves are designed to regulate and accurately control flow ...