APV stainless steel valves
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO ...
ACMO S.p.A.
DN: 150 mm - 610 mm
Temperature: 80 °C
... Flange Options Standard flange Custom flanges are available Material Contact Options Carbon steel, 304 stainless steel, 235 BHN abrasion-resistant steel, SAE 660 bronze
DN: 50 mm - 255 mm
Temperature: 80 °C
... Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 stainless steel Position ...
DN: 100 mm - 455 mm
... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control over flow rates. ...
DN: 8 mm - 50 mm
Pressure: 50 bar - 63 bar
Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Socket weld rotating - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...
DN: 40 mm
Pressure: 50 bar - 63 bar
Temperature: -50 °C - 185 °C
Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Thread BSPP ISO 228-1 - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...
DN: 0.5 in - 1 in
Pressure: 6 bar
Temperature: 180 °C
Model: - Straight adjustable - Material body: - Stainless steel 1.4408 / CF8M Connection: - Thread BSPP ISO 228 - Material seats: - FKM / PTFE Including: - Pressure gauge Note: - Clean steam Pressure ...
DN: 0.5 in - 40 in
... Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast ...
China MED Valve Co., Ltd.
DN: 0.5 in - 40 in
Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ...
China MED Valve Co., Ltd.
DN: 2 in - 60 in
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Pneumatic Actuated Three Way Ball Valve Provider: BS 5351 Ball Valves with Pneumatic Actuator, ASTM A351 CF8, DN80, PN16, BW, Flanged, FF BS 1560, BS 5146 Test. Valve Description Design ...
China MED Valve Co., Ltd.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 25 mm - 600 mm
Temperature: -46 °C - 250 °C
... wheel can easily open and close the valve. 5) Wedge-shaped seal structure is provided by the mechanical force of the valve stem, ball and wedge against the seat and seal. Track ball is mandatory sealed ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,200 mm
Pressure: 16 bar
Temperature: -46 °C - 550 °C
Design Standard ANSI B16.1 End Connections Flange ASME B16.5/B16.47 Features of 3-way ball valves are as follows: 3-WAY BALL VALVE has two kinds of flow passage pattern:Type L(3-way ...
wenzhou domos fluid equipment co.,ltd
DN: 2 mm - 16 mm
Temperature: -35 °C - 200 °C
Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 2 mm - 48 mm
Temperature: -23 °C - 125 °C
Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 2 mm - 32 mm
Temperature: -60 °C - 350 °C
... without Special features Consisting of cast double-eccentric butterfly valve and actuator DIN ISO 5211 interface as standard Butterfly valve body made of steel or stainless ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 15 mm - 100 mm
... Reinforced PTFE, Usage and construction: L style three-way ball valve can be used for changing the direction of the flow, connecting the two way, T style three-way ball valve can be used for diffluence, ...
ROPO GmbH
DN: 50 mm - 2,000 mm
Pressure: 16 bar
Temperature: -40 °C - 205 °C
• Valve plate material: Ductile iron nylon coated, Ductile iron-zinc plated, AI bronze • Construction ISO5752 AP1609 GB12221 • Design standard:GB12238 • Inspection standard: ISO 5208 • Inspection standard: 1) ...
ROPO GmbH
DN: 50 mm - 6,000 mm
Pressure: 16 bar
Temperature: -40 °C - 200 °C
• Body material: WCB/Ductile iron/Stainless steel • Construction: ISO5752 API 609 GB12221 • Design standard: GB12238 • Inspection standard: ISO 5208 • Inspection standard: 1)Density: 1.1xPN 2) ...
ROPO GmbH
DN: 25 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C
The INNOVA M-type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is designed for the direction of product flow from the upper to the lower body. To ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: 140 °C
The L type valve is a pneumatic divert single seat valve with diverging flow designed for hygienic applications. The plug is specifically designed to manage diverging flows, given that it closes against ...
INOXPA
DN: 6 mm - 50 mm
Pressure: 6, 10, 8, 4 bar
Temperature: -20 °C - 140 °C
... over compression of the diaphragm. The diaphragm valve can be actuated either manually or pneumatically (stainless steel pneumatic diaphragm valve) and controlled by ...
INOXPA
DN: 0.125, 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 150 °C
Throttle valve, in block shape, Stainless steel 1.4404, Straight-way valve with restricted flow in both directions.
RIEGLER & Co.KG
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...
DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C
Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal pressure PN 16 C Stem and disc connection - fixed – rolled; stem, disc and seat ring - stainless ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 10, 25, 16, 6 bar
Temperature: -60 °C - 450 °C
... face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - fixed - rolled stem, disc and seat ring - stainless ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 40, 63, 100, 160 bar
Temperature: -60 °C - 450 °C
... according to EN 558 series 1 Stop valve, ends welded, form straight 217 Cast steel GP240GH F Stop valve; seat - stainless steel
ZETKAMA Sp. z o.o.
DN: 0.75, 1, 0.5 in
Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, ...
DN: 10 mm - 50 mm
Pressure: 16 bar
DN: 4 mm - 6 mm
Pressure: 315 bar
needle valve, both sides cutting ring connection, light duty series, material: 1.4571
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C
INTEC K200 Flanged ball valve, floating ball, soft seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body soft seated floating ball FTF dimensions ...
KLINGER-SCHÖNEBERG GmbH
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...
PIETRO FIORENTINI
DN: 1 in - 8 in
Pressure: 102 bar
Temperature: -20 °C - 60 °C
... Materials: ** ¢ Body: Cast steel ASTM A 352 LCC for classes ANSI 600 and 300; Cast steel ASTM A 216 WCB for classes Ansi 150 and PN 16/40. ¢ Head covers: ASTM A 350 LF2 forged steel ¢ ...
PIETRO FIORENTINI
DN: 300 mm - 600 mm
Pressure: 16, 19 bar
... special features of these valves are as follows: • Hermetic internal seal with shut valve • Low pressure losses • Can rotate butterfly through 360° so the seat is self-cleaning without ...
PIETRO FIORENTINI
DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C
AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid.
DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C
... scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerful ball valve rotation and large orifice. FEATURES Stainless steel ball valve, ...
DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 55 °C
Sainless steel valve, FPM O’Ring, PTFE+15% GF seats BSP threaded end connection PN100 Working pressure: 16 Bar* Fluid temperature: -20°C to +150°C** Actuator temperature: -10°C to +55°C (Failsafe ...
VALPES
DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C
The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...
EFSVALVES
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
DN: 0.25 in - 0.75 in
Pressure: 40 bar
Temperature: -20 °C - 80 °C
Threaded BSP or NPT direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C
... Temperature rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass, Stainless Steel AISI 316 Seals: NBR MediaAir, gas, water, ...
DN: 0.25 in - 1 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass or Stainless Steel AISI 316 Seals: NBR/PU, FPM (Viton®), EPDM and PTFE
DN: 0.25, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... Temperature rangeFluid : 5ºC to 60ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass or Stainless Steel AISI 316 Seals:NBR, FPM (Viton®), EPDM
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high precision in ...
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back ...
A. u. K. Müller
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
DN: 0.25 in
Pressure: 630 bar
Temperature: -20 °C - 200 °C
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining