Cross & Morse flexible couplings

Serie GB Self-aligning joints Manufacturer - Chiavette Unificate S.p.A. Part Number - GB 6

Torque: 112,984 Nm

the first, the finest... flexible coupling with Fully-Crowned Gear Teeth. In contrast with ordinary gear tooth forms, the Amerigear Fully-Crowned Tooth represents the ultimate achievement in the art of ...

Torque: 2,800 Nm - 5,300 Nm
Rotational speed: 2,750 rpm - 5,300 rpm

Fail-safe plug-in/jaw coupling with flexible elements Applications with increased requirements for torque and damping capabilities. Product features Axial plug-in, easy exchange Fail-safe Reduces ...

Torque: 1,600 Nm - 40,000 Nm

... lightweight composite membrane couplings and driveshafts. They can be used with tubular steel, or composite carbon or glass fiber shafts. Built for use in passenger ferries, and other marine vessels, CENTADISC-C series ...

Torque: 5.6 Nm - 90 Nm
Rotational speed: 0 rpm - 28,000 rpm

Torque: 0.1 Nm - 8,500 Nm

Your customized coupling completes the drive train: Flexible in design Fine-tuning your drive Maximum performance Metal bellows couplings, elastomer couplings ...

Torque: 43,000, 27,000, 9,800 Nm

Flexible couplings transmit torque from one shaft to another and are particularly useful in cases where a limited amount of misalignment of the shaft is unavoidable. Elflex flexible couplings ...

Torque: 15,000 Nm
Rotational speed: 19,000 rpm

Spider couplings, also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane drive ring. Parallel, ...

Torque: 62,000 Nm

... compensated. The torsionally flexible shaft coupling from Walther Flender is equipped with flexible coupling packages that (in the case of type A) can be exchanged without ...

Torque: 6 Nm - 13,000 Nm

The INKOMA – Inkocross-coupling is a machine element for the transmission of torque between shafts. Within the specified range, radial and angular offset can be varied during operation. The INKOMA – Inkocross-coupling ...

Torque: 2.5 Nm - 120 Nm
Rotational speed: 7,000, 4,000, 10,000, 9,000 rpm

Coupling flexible, compact, for reduced mounting nesting couples. ► Flexible element: - Natural rubber block bonded to - V-shaped metal armatures ► Flange: - aluminium ...

Torque: 132 ft.lb - 19,810 ft.lb

... worn flexible coupling elements and pounded out keyways. And forget about getting the mounted drive apart for service once the flexible coupling hubs have fretted and ...

Torque: 950 Nm - 26,500 Nm

Torque: 0.03 Nm - 50.84 Nm

beam couplings Beam Couplings are a class of coupling called Information Transmitting Couplings - These zero backlash, high torsional rigidity couplings ...

Torque: 1,920 Nm - 8,000,000 Nm
Rotational speed: 1,730 rpm - 6,000 rpm

Nidec DESCH gear couplings GC are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial, axial and angular shaft misalignments. The gear coupling ...

Torque: 0.45 Nm - 5.2 Nm
Rotational speed: 70,000 rpm

Reli-a-Flex™ Shaft (Beam) Couplings Reli-a-Flex™ Couplings: The Reli-a-Flex™ range of flexible shaft couplings, also known as a beam coupling, is an ...

Torque: 2.1 Nm - 17 Nm

Shaft Collars - Clamp Collars Double-Wide, Double-Split, Steel Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping ...

Torque: 3.51 Nm - 25.8 Nm
Rotational speed: 9,000 rpm - 18,000 rpm

... description:ESSEX coupling are very inexpensive, elastic coupling for simple applications. In a limited area, they compensate shaft offsets and steam peak loads such as oscillations. ...

Torque: 0.7 Nm - 12.5 Nm
Rotational speed: 13,000 rpm - 27,000 rpm

Torques 0,7–12,5 Nm Properties miniature jaw coupling low-cost version with set screws for shaft diameter: 3–14 mm Applications/Specific features shaft-/shaft-connections plug-in, hubs are in aluminium • EWJT: ...

Torque: 2.5 Nm - 900 Nm

... steel. The BAUMANN Flex couplings are temperature resistant from -40°C to +100°C in the standard version. For special applications couplings for temperatures up to + 300°C are also available. The standard ...

Torque: 340, 505 Nm
Rotational speed: 3,000, 3,750 rpm

... range is the result of the partnership linking MECCANICA COUPLINGS srl and GUMMI Italia : - The elastic inserts are supplied by GUMMI; - The mechanical parts are supplied by MECCANICA COUPLINGS ...