- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- Dropsa
Dropsa industrial pumps
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... LSC pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm
The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offer a choice of eight models with output pressure capacities ranging from 6 bar (87 psi) to 2931 bar (42500 psi). All models are suitable for ...
Hi-Force Hydraulic Tools
Pressure: 100, 50 bar
... over-hard water.Easy to use: for pumping, testing and bleeding with a single button.Small size for the tightest of locations.3 pump models for your seal tests (for leak testing on water installations- plumbing, individual ...
Flow: 0.24 l/min - 8.2 l/min
Pressure: 15.5 bar - 517 bar
Power: 0.33 ch
... bar) • Pressures to 25000 psi (1724 bar) • All Hydraulic fluids, water (plain or DI), solvents, mild chemicals, liquefied gases
Haskel
Flow: 0.6 l/min - 6.55 l/min
Pressure: 48 bar - 517 bar
Power: 0.75 ch
Key Features • One model available in 9 ratios • Output pressures to 15000 psi (1034 bar) • Flows to 1.5 gpm (5.7 l/min) • Choice of wetted materials • Single air head • Drive pressure 3 psi to 100 psi (.2 to 7 bar)
Haskel
Flow: 0.15 l/min - 13.1 l/min
Pressure: 28 bar - 1,103 bar
Power: 2 ch
... pressure 3 to 100 psi (.2 to 7 bar) When using high pressure ratio pumps the reliability of the XH models (-452 through -1373) will be improved with an air driven supercharge pump, not only to simplify ...
Haskel
Flow: 5,000 l/h - 14,000 l/h
... directly into the bowl. Driving the centrifuge directly from the motor minimizes energy lost in the process, enables more compact designs and reduces the maintenance that gear-or belt-driven systems might require otherwise.
Waukesha Cherry-Burrell
Flow: 30 us gal/min
Pressure: 10 bar
Fluid temperature: 149 °C
Mixers And Blenders / Shear Pumps Designed for "on-line" continuous shearing and mixing action. FEATURES A choice of modularly interchangeable stators and rotors makes it versatile for processing a wide variety ...
Waukesha Cherry-Burrell
Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...
Waukesha Cherry-Burrell
Flow: 85 l/min
Head: 19 m
Power: 500 W
... M cable and plug •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant ...
DENIOS
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
... without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content of fibers - All viscous media - ...
Emile Egger & Cie SA
Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m
The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...
Emile Egger & Cie SA
Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C
... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...
MOUVEX
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series pumps ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
... cement flooring CHEMICAL INDUSTRY : various acids, PVDF latex, alcohol, soap, non aromatic solvents FOOD INDUSTRY : tomato sauce, mash potatoes, gelatin, beer yeast, fish paste, olive oil, wine. PAINT ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Albin Pump
Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm
... fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini pump ...
Flow: 50 l/min
Pressure: 70 bar - 5,000 bar
... pressure and flow rate combinations for applications in the oil & gas, automotive, gas processing, hose manufacturing, and other industrial sectors. The P-Series pneumatic pumps can be ...
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, ...
Johnson Pump
Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m
... duty process in-line pump according to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...
Johnson Pump
Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... limited eddy current losses Silicon carbide pump liquid lubricated internal bearings Heating jackets optional PT 100 temperature monitoring Interchangeable with existing ISO 2858 pumps Suitable ...
Johnson Pump
Flow: 36.5 l/min - 53.9 l/min
Pressure: 30, 40, 20 bar
Power: 0.3 kW - 5.2 kW
3 diaphragms in NBR (Desmopan® and Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: safety valve. On request: pressure accumulator and PTO protection. Cataphoresis treatment on motorpump versions.
COMET Spa
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Pressure: 10,000 psi
The Hydratight range of portable 10,000psi ultra high performance pumps has been designed and developed specifically for use with hydraulic torque wrenches. Pumps operate from two primary power sources: ...
Hydratight
Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW
THE INDUSTRY WORKHORSE! The STREAMLINE® SL-VI Series is available with horsepower offerings of 11 kw, 22 kw, 30 kw, 37 kw and 75 kw at 4.100 bar. The SL-VI Series is a configurable designed water jet pump ...
Pressure: 3,800 bar
... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...
Pressure: 3,800 bar
... needs using the best technology the industry has to offer. Elaborate design for ease of operation and a long product life The NEOLINE pump has been developed with the aim of creating a robust, easy ...
Drum pump, interior in stainless steel with outlet elbow parts in contact with medium made from stainless steel 1.4301 and PTFE electro-statically conductive immersion depht: 910 mm delivery rate per stroke: 560 ...
Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...
Brinkmann Pumpen
Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
... Applications Types of fluid - - Industry water coolants cooling/cutting oils - Kinematic viscosity - - ...25 mm²/s (25 cSt) - Pumping temperature - - 0...60° C Construction Pump body ...
Brinkmann Pumpen
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, ...
KRACHT GmbH
... peristaltic pump with interchangeable heads for delivering smooth, low pulse flows of biological and chemical fluids in 1, 2, 4, or 8 channel standard flow rate and 2 or 4 channel high flow rate configurations. Gilson's ...
Gilson international
Flow: 2 l/h - 22.5 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They ...
Verder Liquids
Flow: 3 l/h - 39 l/h
Pressure: 0 bar - 5 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They ...
Verder Liquids
Flow: 10.4 l/h - 125 l/h
Pressure: 0 bar - 6 bar
Head: 9.5 m
... Peristaltic Pumps Verderflex® Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They ...
Verder Liquids
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...
Argal Pumps
Flow: 1,350 m³/h
... adapt the pump to any system • Upon request: possibility to choose the color of your pump Applications The perfect match between chemical resistance, mechanical strength, lightweight, and good ...
Argal Pumps
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life ...
Argal Pumps
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
InoxMIMGrup S.L.
Flow: 0 m³/h - 45 m³/h
Power: 4 kW - 22 kW
Weight: 56 kg - 180 kg
Industrial Centrifugal Pump FL30CI FL30C industrial centrifugal pumps are used mainly for decanting liquids in the food, chemical and winery industries. The simplicity ...
InoxMIMGrup S.L.
Flow: 0 m³/h - 90 m³/h
Power: 0.55 kW - 2.2 kW
Weight: 65 kg - 180 kg
... food / sanitary centrifugal pumps are used mainly for decanting liquids in the food, pharmaceutics and cosmetics industries. The simplicity of the pump parts allows straightforward maintenance. The level ...
InoxMIMGrup S.L.
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m
... those areas where the use of virtually inert components is critical. Pumps specially dedicated to industrial sectors/applications. Extensive versatility of these peripheral centrifugal pumps, ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Head: 1 m - 120 m
Surface electric pumps in brass with peripheral impeller with mechanical seal, ideal for increasing or maintaining circulating pressures at medium-low hydraulic flow rates in closed-circuit systems. With pressures up ...
SIMACO ELETTROMECCANICA
... method for servicing pumps, as they restore pump performance, lower replacement costs, and minimize downtime. Cartridge kits for VQ series, V series, and PVL series vane pumps are designed ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining