Dunkermotoren protection level motors

Power: 0.1, 0.6, 0.5, 0.4 W
Torque: 0.0003, 0.0007 Nm
Rotational speed: 3,000, 8,500, 6,300, 5,544 rpm

Additional information Rated Voltage VDC:2,0-12,0 Rated Power W:0,1-0,6 Speed rpm:3.000-8.500 Technical Data Model:13130;11170;09250;06340 Rated Voltage(V):2.0;7.0;8.0;12.0 No Load Speed(min-1):3700;1033;7900;8000 No Load Current ...

Power: 160 kW - 2,500 kW

Flameproof motor Type： - 　YB2 　Frame： - 　H355-H630 　Power： - 　160～2500Kw 　Poles： - 　2-24 　Voltage： - 　690～11000V 　Frequency： - 　50HZ, 60HZ 　explosion-protection marking： - 　Exd I, Exd II AT4, ...

... operating ambient temperature for standard motors is 55° C. Special structural measures allow us to design every 0.9° and 1.8° stepper motor with a #39 flange dimension as a high-temperature motor. ...

Power: 30 W - 280 W
Torque: 0.2 Nm - 2 Nm
Rotational speed: 3,000, 2,500, 1,000, 1,500 rpm

... forms and dimensions; - Waterproof or open motors with different degrees of protection; - EMI suppression filters (standard in many motors); - Position, speed and shifting sensors such ...

... three phase motors of M2AX , MAX e MX series, in sizes from 63 up to 400 , have been homologated by the notified body INERIS n° 0080 and are marked: IP 65 , T 125 °C or T 135 °C or T 145 °C II 3D, zone 22 The asynchronous ...

Power: 28 kW - 3,400 kW

... manoeuvres the electric machine, which then works as a generator, recharges the energy storage system, keyword: energy recuperation. Using only the electric drive allows for silent movement ...

Power: 7.5 kW - 315 kW
Rotational speed: 3,000, 1,500 rpm
Diameter: 314 mm - 698 mm

... Efficiency motor line, exceeding the IE4 efficiency levels. SSWE motors with cast iron housing, widely applied in general industries. SSWE Series are designed for who consider energy ...

Torque: 50 Nm - 120 Nm

The RMA 20 tube motor: Thanks to a steel gear unit and a fully-developed motor pack, this delivers great reliability and long service life. Torques of 50 Nm and 120 Nm. Much less expensive than its ...

... EC motor with improved efficiency levels • Suitable for use in areas with indirect contact with foodstuffs (open vegetable display cases for example) • Long service life thanks to maintenance-free ...

Power: 0.37 W - 2.2 W
Operating temperature: 0 °C - 30 °C

Canned Motor 4PN(D) Model:4PN(D) The following is about Canned Motor 4PND related 4PND, I hope to help you better understand Canned Motor 4PND. Product Description Canned Motor ...

Power: 0.5 ch - 5 ch

Cone Drive now offers the option to bundle a NEMA stainless steel (304) motor with your Series F NEMA stainless steel gearbox. Adding a TECO-Westinghouse motor to your order provides ...

Power: 0.37 kW - 7.5 kW
Intensity: 2 A - 2,793 A

Submersible motors from 4″ to 12″. Operation at 50Hz Operation at 50Hz CHARACTERISTICS: Refrigeration Uses the same liquid extracted by the pump acting as a coolant as it passes through. around the engine The ...

Power: 0.37 kW - 37 kW
Intensity: 1 A - 88.3 A
Operating temperature: 30 °C

Encapsulated-Resin Filled Motors Series Deep well Submersible Motors, hermetically sealed stator, anti-track, stator resin-filled prevent motor burn out. NEMA standard, IP68 Motor ...

... Three-Phase Asynchronous Motor (IE2) is typically used in hazardous locations as a motor for compressors, fans and pumps. It is made with high strength materials and insulation, which assures its safety ...

Power: 5 W - 32 W
Rotational speed: 500 rpm - 2,300 rpm
Operating temperature: -30 °C - 50 °C

... FL-SME (EC MOTOR) Description Electronically Commutated Motor Voltage: 220-240VAC Output Power: 5W;15W;20W Cover: Thermoplastic Operating mode: S1 (continuous operating) Compliance with EN60335-1, ...

SERIES EXTERNAL ROTOR DC PERMANENT MAGNET SYNCHRONOUS MOTOR This series of outer rotor permanent magnet DC synchronous motor has the characteristics of wind turbine ...