EBMPAPST electric motors

* It is scientifically designed and reasonably configured following customized schemes on customers’ field ,output,material types and so on.It is high in automation; * Monitored by computer,PLC control,safe,high-efficient,conservation ...

Power: 4.1 W - 10.2 W
Intensity: 0.76 A
Torque: 0.0101 Nm - 0.0113 Nm

... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...

Power: 10.2, 9, 4.1 W
Intensity: 1.17, 0.6 A
Torque: 0.0101 Nm - 0.0113 Nm

... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...

Power: 7.8 W - 8.7 W
Intensity: 0.73 A
Torque: 0.006 Nm - 0.0092 Nm

... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...

Power: 2 W
Intensity: 69 mA - 3,100 mA
Torque: 0.0013, 0.0015, 0.0069, 0.0044 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 4 W
Intensity: 72 mA - 7,550 mA
Torque: 0.003, 0.0166, 0.0165, 0.0167 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 4 W
Intensity: 100 mA - 4,440 mA
Torque: 0.0199, 0.0035, 0.0182, 0.0205 Nm

Vishan motor group is always well prepared to delivery our best service via such downsize and optimize brushless slotless DC motor, our Efficient work will assistant you to find the right ...

Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm

... temperature driven industry is still power machinery industry so the company developed a series of D1CS products to meet the special application field of high temperature and air conditioning industry. The D1CS exhaust ...

Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm

... degrees C. The two kinds of motors have the same parameters. The motor has good closeness. The motor protection level for general places is IP44, and the motor protection ...

Power: 0.75 kW - 315 kW
Intensity: 54.9 A
Torque: 2 Nm

... YBX3 series high efficiency flameproof three-phase asynchronous motor is a series of self sealing fans, fan fans, squirrel cage and high efficiency flameproof three phase induction motors developed by ...

Power: 24.85 W - 186.42 W
Torque: 0.39 Nm - 0.77 Nm
Rotational speed: 0 rpm - 3,500 rpm

... demanding applications ■ 1/30 hp up to 1/4 hp ■ Flexible to meet your needs. Electronic controls, mounting options, gear drives and more RAE M4000 DC motors are available with various ...

Power: 40, 100 W
Intensity: 4 A
Torque: 2 Nm

Direct wheel drive, roller conveyors and turntables. High torque at low speed, special solutions on request Field of application: - Direct drive of wheels, roller conveyors - Turntables - High torque at low speed Advantages ...

Power: 40 W - 500 W

When high-precision and 100% accuracy is required motors with positioning accuracy in the micrometer range, DA series prove their worth. With a compact space-saving build and relatively cogging (detent torque) free ...

Power: 50 W - 500 W

The GM Series manufactured by KERN is a type of a motor equipped with a precise turn run. Additionally, the precise true run of this device is operated with a flexible spectrum. This device is applicable for a wide range ...

Power: 50 W
Torque: 0.3 Nm
Rotational speed: 2,800 rpm - 6,400 rpm

Motor M42: DC motor with permanent magnets 12 and 24 Volt, with starting torque up to 0.3 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power, ...

Power: 100 W
Torque: 2.5, 2 Nm
Rotational speed: 1,200 rpm - 7,000 rpm

Motor M62: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, noload speed and output ...

Power: 120, 350 W
Torque: 2.5, 2 Nm
Rotational speed: 5,000 rpm

Motor M76: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output ...

Power: 0.5 kW - 185 kW
Rotational speed: 1,000 rpm - 3,000 rpm

... handling combined with reliability are of course standard features for this series. Sample applications: - Extruder - Turret trucks - Coating machines - Crane drives - Transmission/ engine test ...

Power: 0.15 kW - 150 kW
Rotational speed: 500 rpm - 3,600 rpm

... those of corresponding 3 -phase motors or can be altered to requirements. In this product line, the use of a compensating coil guarantees a high dynamic response. Sample applications: - Braking motors ...

Power: 0 kW - 46 kW
Rotational speed: 500 rpm - 5,000 rpm

... noise level. Sample applications: - Mobile tools Drive motors in electric vehicles - Motors for auxiliary drives in a wide range of vehicles Areas of application: The ...

Torque: 0.65, 0.35, 0.45 Nm

NEMA17 Short Closed Loop Stepper Motors Product description: With a superior closed loop control and a cost-effective design, the integrated stepper motors provide an efficient and economical solution ...

Torque: 1.8, 2.6, 1.1 Nm

NEMA23 Closed Loop Stepper Motors Advantages： ●Sophisticated closed loop control enhances motor performance with no step loss ●Operates in torque, velocity, and position modes ●Efficient torque ...

Torque: 3.5, 5.5, 5, 7.7 Nm

NEMA34 Closed Loop Stepper Motors Advantages： ●Sophisticated closed loop control enhances motor performance with no step loss ●Operates in torque, velocity, and position modes ●Efficient torque ...

Torque: 7, 15 Nm
Rotational speed: 180, 160 rpm

The KDU Series are Direct Drive Motors which achieve 10 arc-sec positioning accuracy as well as ±0.5 arc-sec repeatability with a resolution of 0.16 arc-sec. The KDU has a large Hollow Shaft design which allows cables, ...

Power: 600, 290, 450 W
Intensity: 14 A
Torque: 18, 6 Nm

... BLDC outrunner motor with its compact design is perfectly suited for a direct drive. It can achieve torques of up to 13 Nm, even in continuous operation. The stable bearing allows for high radial loads. Special features The ...

Power: 134, 201, 301 W
Intensity: 5.6, 7.3 A
Torque: 0.6 Nm

... plug-in system. Additional power electronics are required to operate the motor. Motor design with a hollow shaft is also available upon request. This allows the cables to run through ...

Power: 106, 167, 232 W
Intensity: 5.6, 5.4 A
Torque: 1.9 Nm

... Additional power electronics are required to operate the motor. The design of the motor with a hollow shaft allows the cables to run through the motor or output on both ...

Power: 0.375 kW - 2.2 kW
Rotational speed: 2,850 rpm

... How to Select Pump and DC Motor Combinations: The following section contains pump/motor curves for various combinations of pumps and motors used on Stone hydraulic ...

Torque: 0.79, 1.53, 2.21 Nm

The RP34 BLDC Motor Nema 34 features a peak torque that goes up to 1096 oz-in. It is a brushless motor which integrates ball bearing construction and a low cogging electro-magnetic design, both of which ...

Torque: 0.45, 0.69, 0.83, 1.09 Nm

... a compact brushless servo motor equipped with a maximum holding torque power of 390 Ncm. It has a weight of 1.4 kg, current of 6.8 A, inductance of 21 mH, resistance of 20 ohms, and voltage ...

Torque: 1, 2.01, 3.01, 4.01 Nm

Our ElectroCraft RapidPowerTM Plus Brushless Servo Motor, Nema 34, is a high voltage, high performance brushless servo motor incorporating the latest electro-magnetic components creating high continuous ...

Power: 4,021 W
Intensity: 9 A
Torque: 32 Nm

... a high torque EC Fan Motor. WHAT IS EC MOTOR TECHNOLOGY? An Electronically Commutated (EC) motor is a brushless motor where the commutation of the ...

Torque: 7 Nm

... input. ► Motor current overboost. ► Intelligent management of the current profile. ► Range of operating voltage: 32-80 VDC. ► Protections: -Protection against under-voltage and ...

Torque: 3 Nm

... POSITION and CSP. ► Different variety of HOMING operation modes. ► TOUCH PROBE hardware input. ► Motor current overboost. ► Intelligent management of the current profile. ► Battery ...

... Setting by means of a rotatory dip-switch. ► Automatic current reduction at motor standstill. vProtections: -Protection against under-voltage and over-voltage. -Protection against a short-circuit ...

Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C

The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.

Rotational speed: 450, 375 rpm
Diameter: 38 mm
Operating temperature: -30 °C - 80 °C

The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired. It could be ordered in clockwise, anticlockwise and ...

Rotational speed: 10,000, 2,700 rpm
Diameter: 27.5 mm
Operating temperature: -30 °C - 80 °C

The model M70 works with a continuous current; it is available only for low voltage, and for construction, can run into the two directions,changing the polarity of the applied voltage.

Power: 0.06 kW - 315 kW
Rotational speed: 3,000, 1,500, 1,000, 750 rpm
Diameter: 56 mm - 355 mm

Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...

Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C

Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end ...

Power: 0.06 kW - 5.5 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Operating temperature: -10 °C - 40 °C

... phase and single phase motors are suitable for fans and blowers, the motors are reliable, durable, high efficient, flexible and safe, your overall operating costs and downtime can be minimized by using ...

Power: 0.09 kW - 18.5 kW

... of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, two speed motors, ...

Power: 0.12 kW - 13 kW
Torque: 0.75 Nm - 75 Nm
Rotational speed: 500 rpm - 6,000 rpm

The ABM SINOCHRON® motor is a permanently excited synchronous motor with internal permanent magnets (IPM motors). Through the special design, additional encoder technology is not needed, ...

Power: 0.25 kW - 2.2 kW
Intensity: 1.6 A - 11 A
Operating temperature: -10 °C - 40 °C

3-phase Motor with Integrated Controller. The switch to 3-phase motors is accomplished easily and impresses with a high reduction of TCO at maximum efficiency. • Identical power ...