- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- EBRO
EBRO manual valves
DN: 20, 25 mm
Pressure: 16 bar
Temperature: -20 °C - 140 °C
Ball valve for energy metering with male thread, telescopic swivel nut and black T-handle.
BONOMI GMBH
DN: 150 mm - 610 mm
Temperature: 80 °C
... series of deflectors and retainers to reduce wear and extend service life Removable bonnet cover for easy inspection of valve body Displacement pocket prevents wedging and packing into an end seal Optional return ...
DN: 50 mm - 355 mm
Temperature: 80 °C
... from material flow by a metal insert. By design, the valve “self cleans” material from the seat on each stroke of the valve blade improving overall seat life. Ideal application: Manually operated ...
DN: 100 mm - 455 mm
... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control ...
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
VALVE, HIGH VACUUM, PTFE, O-RING, THREE-WAY With two 9mm O.D. sidearms sealed to the barrel at a 90® angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the ...
Synthware glass
DN: 9 mm
... primaryseal on the precision formed tapered seat . For replacement Viton® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at ...
Synthware glass
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
Type: Angle seat valves Functioning: 2/2 way pneumatically operated, Normally closed Body material: Stainless Steel AISI 316 series Port connection: G 1/2, G 3/4, G 1, G 1 1/2, 1 1/4, 1 1/2, 2 Flow Kv (l/min): 80, ...
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
DN: 10 mm - 100 mm
Pressure: 40, 16, 100 bar
Temperature: 0 °C - 220 °C
... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...
VALSTEAM ADCA Engineering S.A.
DN: 10 mm - 100 mm
Pressure: 100, 16, 40 bar
Temperature: 0 °C - 220 °C
... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...
VALSTEAM ADCA Engineering S.A.
DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...
VALSTEAM ADCA Engineering S.A.
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
DN: 3.88 in
... standard GURU® Plug. This thermostatic drain valve responds to the engine coolant temperature and will pop open to rapidly drain the system before freeze damage can occur when the coolant reaches the valve’s ...
Temperature: 35, 40 °F
The GURU® Valve DL2.1 CH and CHS Plugs are self-operating drain valves that are easily retrofitted into water-cooled air compressor heads to protect the compressors from freeze damage when a locomotive ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
- Manually operated 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal cans com from a controller, main switch, PLC, etc. This model also incorporates a 3 way valve ...
A.G.P. VALVULAS 10 SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
... to-196°C. The shut-off valves are approved according to DIN EN 1626. The series is available in the nominal widths DN10 - DN50 and can be designed with connection options for welding ends and welding sockets. The manual ...
Goetze KG Armaturen
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
Overview CRANE® bronze gate valves have stood up to commercial and industrial services for more than a century.
Crane Process Flow Technologies GmbH
Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free ...
Crane Process Flow Technologies GmbH
Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century.
Crane Process Flow Technologies GmbH
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most ...
ECONEX S.R.L.
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -50 °C - 225 °C
... collar cap with cap nut G 1/2" acc. to DIN 16284 INTEC K600 - Pressure Gauge Ball Valves No compromise for your kettle pressure! Stainless steel ball valves for pressure gauges and measurements ...
KLINGER-SCHÖNEBERG GmbH
DN: 0.25 in - 3 in
Pressure: 63, 40 bar
Temperature: -10 °C - 225 °C
RK-Proball - one-, two- or three-piece ball valves An interesting alternative! The RK-Proball series offers special interesting cost effectiveness. Depending on the design the ball valves are suitable ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant ...
The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 0.125 in - 0.75 in
Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C
1. The direction-change turns lightly with good hand feeling and exact orientation. 2. Large effective circulating area leads to little pressure loss. 3. Panel and body installation are optional. The panel installation ...
Airtac Automatic Industrial
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining