Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
... and low level in the same tank whose hysteresis does not exceed 1.5 meter. These float level switches are used wherever magnetic level controllers can not be used ...
ATMI
Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
This level regulator is technically similar to SOBA but smaller in size, ideal for small tanks. It detects the level by tilting the float which activates the contact connected to ...
ATMI
Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
... low level, the other as a high level, it is also possible to regulate severals levels. The SOBA level regulator are equipped with an external loaded resin ballast ...
ATMI
Process temperature: -50 °C - 300 °C
Process pressure: 0 bar - 150 bar
... product is ATEX accredited. Key Features No springs in switch mechanism – positive snap action switching Vibration resistant – eliminates spurious trips Multiple switch point ...
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 3.45 bar
The M8000-C miniature liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating ...
Madison Company
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar
... fill level drops again, the float does as well and actuates the reed contact again. The switching function set at the factory • contact closes when the level rises • ...
SIKA
Process temperature: -30 °C - 80 °C
Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. Specifications Contact ...
StandexMeder Electronics GmbH
Process temperature: -40 °C - 160 °C
Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other ...
StandexMeder Electronics GmbH
Process temperature: 200 °C
Process pressure: 0 bar - 12 bar
... stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. ...
StandexMeder Electronics GmbH
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar
... magnetic reed switch contacts or a reed switch chain transmitter. One or more floats, free to slide along the guide tube, magnetically act on the contacts positioned at the intervention ...
Riels Instruments
Process temperature: -20 °C - 350 °C
Process pressure: 100 bar
... PRODUCT FEATURES Informations measured - Level Detection type - Switch Explosion protection - Xd atex Mounting - On the side Measurement site - Tank Measurement type - With ...
Riels Instruments
Process temperature: -20 °C - 120 °C
Process pressure: 10 bar
The RIL210 float level switch can be used for dirty liquids, water, petroleum, refrigerant oils. It tolerates the presence of metal particles, including ferrous ones, since the float ...
Riels Instruments
Process temperature: -40 °C - 70 °C
... Water level measurement in water level stations with float shaft and in pipes from Ø 4 " Parameters: Water level [m],[cm] Sensor: Shaft encoder Measurement principle: Float/counterweight Measuring ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 Pa - 2,500,000 Pa
... are installed. FDM Mini Float Level Switch, Lquid Level Switch (Food Grade) FC/FD series is a magnetic float level ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 35 bar
The FC/FD series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the FC/FD magnetic float ...
Process temperature: -20 °C - 170 °C
Process pressure: 0 bar - 4.5 bar
... FAB Cable Float Level Switch, Lquid Level Switch (Food Grade) The FA/FB series cable float level switch ...
Process temperature: -50 °C - 180 °C
A level switch, is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
Process temperature: -20 °C - 120 °C
A level switch is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
Process temperature: -20 °C - 120 °C
A level switch is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 20 bar
Bilge Level Switch Body entirely AISI 316 L stainless steel Maximum operating pressure 20 BAR Maximum operating temperature -10 / + 120 ° C Average specific weight> = 600Kg / m3 SPDT exchange contact ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSoem, is composed of a float totally in AISI 316 of di- dimensions ...
ASIT ITALIA
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
The level switch is suitable for fluids in general, particularly used in the naval, chemical and aqueduct sectors. Our model AI.LSOEM.W, is composed of a float totally in AISI 316 of dimensions ...
ASIT ITALIA
Process temperature: 0 °C - 70 °C
The WBF33A30-0 Series, manufactured by Comus Group®, which has a 240 Vac voltage switch that can hold a 100 Watts maximum 10 Watts in a minute and has a solid state output resistance. Furthermore, it has a 30° degrees ...
The Comus Group
Process temperature: -10 °C - 128 °C
The VFS30 is a reversible float switch manufactured by Comus. It features a stainless steel SUS304 construction, and dimensions of 60.0x28.0mm. The switch has a voltage rating of 200V ...
The Comus Group
Process temperature: -10 °C - 120 °C
The VFS75 is a stainless steel float level manufactured by Comus. This device is made of SUS303 stainless steel and features a contact form which is normally closed. It runs on a maximum switching voltage ...
The Comus Group
Process temperature: 0 °C - 125 °C
EGLS Level sensors are used for tank level control. Different casing connection and material types are available. Working Principle: The magnetic field of the magnet in the float which ...
Process temperature: -10 °C - 90 °C
... Special electrical connection - Float in stainless steel 316L or material suitable for high viscosity - CU-TR for Russian market - Special lengths on request, with minimum increments of 50mm - LG1/2G: with two floats
Fox S.r.l.
Process temperature: -25 °C - 70 °C
Process pressure: 40 bar
... manufactured by Aplisens, is a level switch equipped with an explosion proof version. It has a protection class of IP 66/68, nominal pressure capacity of 40 bar and 321SS wetted parts. This level ...
... ordering the level swicth with connector according to the requirements, e. g. with flange acc. to DIN or ANSI standard. The level switch can also be ordered in version fully made from ...
The Plastic Float Switches have the following Features: - M 16x2 and 1/2" NPT - 1 NO, NC or change over - Temperature range upto +70°C - max. 3bar - IP65
Jacob GmbH
Process temperature: -40 °C - 150 °C
The Magnetic Switches in the round housing have the following Features: - ø8 and 12 mm - Threads M8, M10, M12, PG7 - PVC- and Silicone-cable - M12-connector - max. 1 NO or NC, change over - overall length: 30 to ...
Jacob GmbH
Process temperature: -40 °C - 150 °C
The Magnetic Switches in the flat pack have the following Features: - 35x13 mm to 80x35 mm - PVC- and Silicone-cable - M12-connector - 1 NO or NC, change over - Temperature range -40°C to +150°C - upto IP65 - Options: ...
Jacob GmbH
Process temperature: -20 °C - 150 °C
Magnetic float level controls for liquids are made of a reed contact placed inside the shaft and an operating magnet placed in the float which runs due to the increase ...
... range of electromagnetic level switches designed to meet the most varied application needs in the field of liquid level control. The operation consists of a reed ampoule ...
Process temperature: -20 °C - 200 °C
Process pressure: 10 bar
Suitable for liquid Point to Point level measurement Side-mounting Simple operation and easy installation NO or NC output The user can choose LS0003 against strong acid/alkali liquid It is reliable over 2 million working cycles
Process temperature: -20 °C - 80 °C
• Deposit level control • Magnetic float • With PP or PTFE cable • Counterweight, elbows and pulleys • Simple installation • For mounting level indicators with cable or float. • ...
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 50 bar
... principle of operation of these instruments is based by actuation of a reed contact, located inside of the measuring rod, by a magnetic float. The only moving element is the float, ...
VAL.CO srl
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 4 bar
... controlled temperature oven. The principle of operation is based on the actuation of a reed contact by a magnetic float. The only moving element is the float that moves ...
VAL.CO srl
Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 30 bar
Level controls with 1 electrical contact, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in ...
VAL.CO srl
Process pressure: 2 bar - 6 bar
Our Float Switch with Pneumatic Output (Float Switch) is designed to be mounted into the top of a tank into which access is possible to secure the locknut and float. ...
Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade ...
RULE INDUSTRIES
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 1 bar
... cost polypropylene level switch - Hermetically moulded, double chamber - Mercury free operated micro switch - Adjustable switch differential - Low specific ...
NIVELCO Process Control Co.
Process temperature: -20 °C - 75 °C
Process pressure: 8 bar - 50 bar
... COMECO’s level probe LCSF is based on the switching of a reed switch by a magnetic float, moving alongside a protective tube. Large variety of versions based on different floats ...
Comeco Control & Measurement
Process temperature: -10 °C - 80 °C
Euroswitch
Process temperature: 60 °C
Process pressure: 0 bar - 5 bar
... model from KOBOLD is a high-quality level switch that developed for monitoring filling levels of liquids economically. The liquid must not include solids and not metallic particles. ...
KOBOLD INSTRUMENTATION
Please specify:
Help us improve:
remaining