EUCHNER single-pole switches

Voltage: 24 V

... Plug connector M12, 8-pin • Auxiliary release • Unicode Unicode evaluation Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last ...

Primary current: 1 mA - 100 mA
Voltage: 5 V - 24 V
Operating temperature: -20 °C - 55 °C

• Up to 20 switches in series • Short circuit monitoring • 2 safety outputs (semiconductor outputs) • Up to category 4 / PL e according to EN ISO 13849-1 • With 2 plug connectors M12 • Multicode • Door monitoring ...

Primary current: 50, 40 mA
Voltage: 26.5 V - 31.6 V
Operating temperature: -20 °C - 55 °C

... indicates the state of the ASi bus. The STATE LED indicates the state of the switch. The LOCK/DIA LED indicates if the door is locked and whether a fault has been detected in the switch.

Primary current: 1 mA - 50 mA
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

... Important: The actuator must be ordered separately. Unicode evaluation Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last ...

Primary current: 480, 80 mA
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

• Locking force up to 6,500 N • Up to 20 switches in series • Short circuit monitoring • 2 safety outputs (semiconductor outputs) • Category 4 / PL e according to EN ISO 13849-1 • With 2 plug connectors M12 • Unicode • ...

Primary current: 50 mA
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

Safety switch CET-AS – with AS-i connection, closed-circuit current principle, with wire front release (bowden) 4 m • Safety switch with guard locking and integrated evaluation electronics • Locking ...

Primary current: 1 mA - 50 mA
Voltage: 0 V - 30 V
Operating temperature: -20 °C - 55 °C

Safety switch with integrated mounting magnet for process protection (without guard locking monitoring) Integrated CES-AR electronics A special evaluation unit is not required Up to 20 AR devices can be connected in ...

Primary current: 0.25 A - 8 A
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

... existing safety switches The CTP safety switch combines the proven functional principle of electromechanical safety switches with guard locking with modern transponder-coded safety ...

Primary current: 0.25 A - 8 A
Voltage: 300 V

... monitoring The switch generates its own clock signal on the output lines OA/OB. Pay attention to this aspect when connecting to control systems and relays. Unicode evaluation Each actuator is highly coded (unicode). ...

Primary current: 0.25 A - 8 A
Voltage: 24 V

... to 20 switches in series • Short circuit monitoring • 2 safety outputs (semiconductor outputs) • Category 4 / PL e according to EN ISO 13849-1 • Unicode Approach direction Can be adjusted in 90° steps Short ...