EUCHNER technology switches

Primary current: 1 mA - 50 mA
Voltage: 0 V - 30 V
Operating temperature: -20 °C - 55 °C

Safety switch with integrated mounting magnet for process protection (without guard locking monitoring) Integrated CES-AR electronics A special evaluation unit is not required Up to 20 AR devices can be connected in ...

Primary current: 80 mA
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

... Unicode Approach direction Can be adjusted in 90° steps Unicode evaluation Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Category ...

Primary current: 0.25 A - 8 A
Voltage: 300 V

... monitoring The switch generates its own clock signal on the output lines OA/OB. Pay attention to this aspect when connecting to control systems and relays. Unicode evaluation Each actuator is highly coded (unicode). ...

Primary current: 0.25 A - 8 A
Voltage: 24 V

... to 20 switches in series • Short circuit monitoring • 2 safety outputs (semiconductor outputs) • Category 4 / PL e according to EN ISO 13849-1 • Unicode Approach direction Can be adjusted in 90° steps Short ...

Primary current: 0.25 A - 8 A
Voltage: 24 V
Operating temperature: 0 °C - 65 °C

... cable end sleeves • Multicode • Monitoring output OD Multicode evaluation Every suitable actuator is detected by the switch. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs ...

Primary current: 40 mA
Voltage: 24 V
Operating temperature: -25 °C - 55 °C

... / PL e according to EN ISO 13849-1 • Unicode • Three active faces • Plug connector M12, 8-pin (aligned) Industry 4.0 ready The switch can communicate in combination with an EUCHNER BR IO-Link ...

Primary current: 40 mA
Voltage: 24 V
Operating temperature: -25 °C - 55 °C

... / PL e according to EN ISO 13849-1 • Three active faces Multicode evaluation Every suitable actuator is detected by the switch. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs ...

Primary current: 40 mA
Voltage: 24 V
Operating temperature: -25 °C - 55 °C

... PL e according to EN ISO 13849-1 • Three active faces Multicode evaluation Every suitable actuator is detected by the switch. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs ...

Primary current: 0 A - 0.04 A
Voltage: 24 V
Operating temperature: -20 °C - 55 °C

... heads • Connection to the ET200s and ET200pro • Familiar EUCHNER AP interface • Multicode Short circuit monitoring The switch generates its own clock signal on the output lines FO1A/FO1B. Pay attention to this ...

Primary current: 8 mA - 500 mA
Voltage: 26, 2, 24 V
Operating temperature: -20 °C - 60 °C

Read heads CMS, design A - with NO contact combinations, PVC • In combination with evaluation unit CMS-E-AR • Cube-shaped version, 88 x 25 mm • NO contacts wired in parallel • Connecting cable • Cable type: PVC