- Hydraulics - Pneumatics >
- Valve >
- Pneumatic valve >
- Festo Process
Festo Process pneumatic valves
DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C
Wall clamping screws FRL1 M4x14 FRL2 M5x18 FRL3 M6x20 Fluid Compressed air. Assembling position Vertical
DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment ...
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C
Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devicesions due to special features ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C
Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal materials ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C
Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal ...
Praher Plastics Austria GmbH
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
... Operator Port Connections. More Number Of Gland Packings At Valve End & Operator End For Longer Life. Operator With Threaded / Namur Ports. Lubricated Pilot Air Not Necessary. Applications: Air ...
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
DN: 50 mm - 150 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...
DN: 50 mm - 500 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... - Easy to install, even in confined spaces: compressed air inlets with G 1/4” threaded adjustable connections to enable alignment with the piping. PPGR connections prevent any risk of corrosion. - New valve ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... other exotics with various trim sizes for every valve measure and incorporate an exact precise control. It is available in globe, angle, 3-way, sanitary, and cryogenic designs. This valve comes with pneumatic ...
DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control ...
AIRTEC Pneumatic
DN: 15 mm - 600 mm
Temperature: 0 °C - 260 °C
Flanged end connection resilient seated ball valve Our top performing flanged ball valve Features Robust engineering design Self relieving seat technology Low emissions stem seal technology High quality Benefits Very ...
Pressure: 0 bar - 10.3 bar
Temperature: 200 °F
... " and available in both mild steel and stainless steel construction. Knife gates come complete with air operator and solenoid valve. All standard valves are pressure rated to 150 psig ...
DN: 15 mm - 100 mm
Pressure: 160 bar
Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port ...
RTK Regeltechnik Kornwestheim
DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C
YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...
UNIVER Group
DN: 16 mm - 250 mm
Supports safe use in dangerous atmospheres. Compliant with IEC standards, (KOSHA) Korean Occupational Safety and Health Agency's Explosion Proof Certification and (ITRI) Industrial Technology Research Institute's Explosion Proof Certification.
CKD
DN: 5 mm - 12 mm
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 70 °C
Valves series “CA” are produced in the 3/2, 3/3, 5/2 and 5/3 pneumatic functions. The poppet kind of construction and the very rugged control allow the valve to stand high stress. The ...
Waircom
DN: 63 mm - 110 mm
BASIC HYDRAULIC VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.
DN: 63 mm - 110 mm
HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.
Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C
... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... and resets locally. When the pneumatic dry pilot detection line is exposed to flame heat, its automatic fire sprinklers shatter-open, while venting the air pressure from the FDV-DP0’s actuator, commanding ...
Raphael Valves Industries (1975) Ltd
... ensures high flowrates with minimum head loss * The valve trips open automatically upon a gradual release of water pressure from its control chamber.The valve is actuated by Dry Pilot Line’s pneumatic ...
Raphael Valves Industries (1975) Ltd
Introducing FPS-SIPO: the pinnacle of precision control for pneumatic systems. FPS-SIPO, standing for Single Interlock, Pneumatic, Local, is meticulously engineered to seamlessly integrate into industrial ...
Raphael Valves Industries (1975) Ltd
SMBA PNEUMATIC MODEL based on SMB The gear transmission mechanism inside of unit is based on that of the SMB model. Air motor is driven and operated by a supply of air, and SMBA is ideal for use in ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C
special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics
ASV Stuebbe GmbH & Co. KG
DN: 12 mm - 15 mm
Pressure: 6 bar
compact design with high flow capacities integrated lift limitation visual position indicator ideal for realising switching functions in restricted installation spaces
ASV Stuebbe GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator
ASV Stuebbe GmbH & Co. KG
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 6, 8, 10, 12 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. ...
NIHON PISCO CO., Ltd.
DN: 0.5 in - 2 in
INDUSTRIAL USE Spring return or double effect pneumatic actuator 3-way FFF BRASS ball valve, full bore See the above-mentioned diagram. In the opening phase, the actuator provides a decreasmg ...
Comparato Nello S.r.l.
DN: 8 mm - 100 mm
PNEUMATIC VALVE – 2 WAY FF BRASS INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF BRASS ball valve, full bore The Pneumatic ...
Comparato Nello S.r.l.
DN: 8 mm - 100 mm
PNEUMATIC VALVE – 2 WAY FF AISI 316 INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF AISI 316 ball valve, full bore ACCESSORIES ON ...
Comparato Nello S.r.l.
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure ...
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.25, 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
... made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ Medium - Compressed air
ITV
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining