- Hydraulics - Pneumatics >
- Valve >
- Stainless steel valve >
- GEMU
GEMU stainless steel valves
The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type ...
SMS-TORK
For your hygienic applications such as milk and juice production, with TORK hygienic actuators human helath is under control. Technical Features Max. Air Pressure: 700 kPa (7bar) Min. Air Pressure: 400 kPa (4bar) Temperature Range: ...
SMS-TORK
Pressure: 10 bar
Temperature: -30 °C - 130 °C
The TORK T-KV.W 1320 series wafer type butterfly valve is constructed using stainless steel materials for its base and AISI 316 or 304 for its disc fitting. It generates 10 bar pressure ...
SMS-TORK
DN: 5.5 mm
Pressure: -1 bar - 40 bar
Temperature: -15 °C - 180 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional ...
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
Part 0006522676 air fill valve for portable stainless steel tanks.
Haws AG - Headquarters for Europe, Middle East and
DN: 40 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 0 °C - 60 °C
... installed as an end line valve, bottom discharge valve or tank dump valve • The wafer valve can be transformed into a one-way Lug body valve thanks ...
DN: 350 mm - 400 mm
Pressure: 7 bar
Temperature: 0 °C - 100 °C
The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve ...
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed for the rationalization and automation of processes used in the tire, plastic and rubber ...
AIRTEC Pneumatic
DN: 50 mm - 500 mm
Pressure: 0 bar - 7.9 bar
Temperature: -40 °C - 175 °C
Stainless Steel Butterfly Valves Series 486 ANSI and Metric Flange Compatible All stainless steel butterfly valve The Series 486 ...
Posi-flate
DN: 25 mm - 100 mm
Pressure: 16 bar - 40 bar
... auxiliary energy Nominal diameter DN 25.100 Nominal pressure PN 16...40 Globe valve with flanges single seat unbalanced / balanced Valve body made of GP-240-GH or stainless steel ...
RTK Regeltechnik Kornwestheim
DN: 0.125 in - 1 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 180 °C
Airwork’s VRX quick exhaust valves allow the possibility (if mounted on a pneumatic cylinder) to discharge rapidly the pressure contained inside it. Thanks to the material used for their realization (stainless ...
DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C
The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample
BIAR Sampling systems
Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C
... handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral metal seated version is available with shut off capability exceeding current MASS-SP81 standards.
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral metal seated version is available with shut off capability exceeding current MASS-SP81 standards.
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
... handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral metal seated version is available with shut off capability exceeding current MASS-SP81 standards.
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control and other control applications. The hydraulic control ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4, 6, 8, 10, 12 mm
Pressure: 0 MPa - 0.6 MPa
Temperature: 0 °C - 60 °C
Pressure control valve saves compressed air consumption. In driving an actuator under high pressure, compressed air can be saved by use of the pressure controller to reduce the pressure only during home return. Controls ...
NIHON PISCO CO., Ltd.
DN: 4 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Temperature: -15 °C - 150 °C
Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion. Best suitable for industries such as chemicals, medical care, semiconductor manufacturing, solar battery and secondary battery etc. All ...
NIHON PISCO CO., Ltd.
DN: 4, 6, 8, 10, 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 80 °C
PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. The resin body color is clear (semitranparent). It is compatible with special specifications. Sealing rubber ...
NIHON PISCO CO., Ltd.
DN: 15, 20, 25 mm
2 way MM BRASS Diamant ball valve with spacer for insulation 2-way MM BRASS with caps and tangs Full bore PN16 With spacer for insulation, stainless steel components
Comparato Nello S.r.l.
DN: 10 mm - 32 mm
2 way FF BRASS Diamant ball valve with spacer for insulation 2-way FF BRASS Full bore PN40 With spacer for insulation, stainless steel components
Comparato Nello S.r.l.
DN: 15, 20 mm
3 way FFF BRASS horizontal Diamant ball valve with spacer for insulation 3-way FFF BRASS HORIZONTAL Full bore PN30 With spacer for insulation, stainless steel components
Comparato Nello S.r.l.
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
Ridart srl
DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min
It’s a Protection System with ribbon coil: déflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery ...
Ridart srl
DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C
... /EU. ISO EN 13616-1, Technical Norm Fire Prévention 41/256 31/10/2019. d P.R. 10/520 19/03/1955 and subseguent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - ...
Ridart srl
DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C
... way body (DN 10–32) – Y-pattern body (DN 50) – quick-acting design with electric actuator Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ...
ARAKO spol. s r.o
DN: 6 mm - 12 mm
Pressure: 40, 50, 45 bar
Temperature: 60 °C
... for control of quick-acting valves – design including or without regulating valve – suitable for single or double acting operating – meets all tests for use in nuclear energetics – medium – air Material stainless ...
ARAKO spol. s r.o
DN: 10 mm - 150 mm
Pressure: 25 bar - 250 bar
Temperature: 350 °C
... electronic position indicators – control by solenoid valve – air storage tank for emergency modes Design options: – straight way body (DN 10–32) Material stainless steel ...
ARAKO spol. s r.o
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C
Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services ...
Penta Srl
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C
... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...
Penta Srl
DN: 10 mm
Pressure: 4 bar
Temperature: 48 °C
Front control valve in stainless steel, inlet and outlet SS tube 10x1mm, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum ...
Pressure: 4 bar
Front control valve in stainless steel, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum ...
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... without drain port (drain valve cannot be added) spindle thread not in contact with medium wear-resistant stainless steel valve seat with a black handwheel ...
Kemper Olpe GmbH
DN: 15, 20, 25, 32 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... opened indication of pre-setting on bracket without drain port (drain valve cannot be added) Open position indicator wear-resistant stainless steel valve ...
Kemper Olpe GmbH
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series ...
Athena Engineering S.r.l.
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
Trunnion Mounted Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: ...
Athena Engineering S.r.l.
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water Cover SS304 Plate Aluminum ...
UFLOW AUTOMATION
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Connection - Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / PEEK / VITON / EPDM Shaft - SS304 / SS316 Cover - Nylon Glass-Filled (Corrosion résistive) with SS ...
UFLOW AUTOMATION
DN: 0.5 in - 4 in
... SS410 3PC design twinseal ball valve. Floating ball design. Balls are precision machined and mirror finished for bubble-tight shutoff with less operating torque. 3PC design twinseal ball valve.Full ...
UFLOW AUTOMATION
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining