Stainless steel valves

DN: 65, 100, 80 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

... DUAL BLOCK® ball valve with female ends for solvent welding, ASTM series with multivolt electric actuator 90-240 V AC 50-60 Hz. FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard ...

DN: 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C

... with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area STAINLESS steel ...

DN: 15 mm
Pressure: 6 bar

... with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area STAINLESS steel ...

DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C

... Product description
Needle valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these valves are used in demanding hydraulic systems such ...

DN: 3.18 mm - 14.27 mm
Pressure: 1.4 bar - 6.9 bar

... needle valves (Medium pressure)

DN: 3.18 mm
Pressure: 1.4 bar
Temperature: -73 °C - 232 °C

... both directions, WEH® needle valves perform this function with absolute reliability. The valves are extremely smooth-running and durable, as the valve needle and the rotating valve spindle ...

DN: 0.125 in - 1 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 180 °C

... The VRX quick exhaust valves from Airwork, when mounted on a pneumatic cylinder, allow for rapid pressure release from within the cylinder. Thanks to the material they are made from, 316L stainless steel, ...

DN: 16 mm

... lever-operated, with position indicator Butterfly valve in action In-line valve VS 16, stainless steel, small flange KF DN 16 The VS und VS C series valves are ...

DN: 16 mm

... Ball valve in action Ball valve VKE 16, stainless steel, KF DN 16 Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. A precisely ...

DN: 16 mm
Temperature: 0 °C - 150 °C

... VE, stainless steel, KF DN 16 High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on ...

DN: 0.5, 0.75, 1, 1.25, 1.5 in
Pressure: 25 bar

... For oxygen, for the manual interruption of gas supply lengths: 65, 120 mm weights: 1.030 / 1.800 g Approvals EN 9539 ...

DN: 6 mm - 40 mm
Pressure: 1.5 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...

DN: 6 mm - 40 mm
Pressure: 40 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...

DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar

... fluctuations as the needle and valve seat are both manufactured from stainless steel. Working Pressure Range: The NV is rated for a maximum inlet pressure of 500 psig. The metal to ...

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

... The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve is moved to ...

DN: 0.375, 0.07 in
Pressure: 0 psi - 250 psi

... connection. Approximate Weight: 57g in stainless steel (303 & 316). Weight will vary slightly, depending on configuration. Porting: 10-32 female threaded inlet and outlet ports. Features Relieving valve ...

DN: 4 mm
Temperature: -18 °C - 93 °C

... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate vacuum when ...

DN: 10, 8, 12, 6, 4 mm
Pressure: 0 MPa - 0.6 MPa
Temperature: 0 °C - 60 °C

... Pressure control valve saves compressed air consumption. In driving an actuator under high pressure, compressed air can be saved by use of the pressure controller to reduce the pressure only during home return. Controls the pressure ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Temperature: -15 °C - 150 °C

... Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion. Best suitable for industries such as chemicals, medical care, semiconductor manufacturing, solar battery and secondary battery etc. All parts are oil-free ...

DN: 6, 4, 10, 8, 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 80 °C

... PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. The resin body color is clear (semitranparent). It is compatible with special specifications. Sealing rubber material can be changed ...

DN: 6 mm - 300 mm
Pressure: 20 bar

... The two-way valve bodies have one single valve seat and are made of forged stainless steel material. They are available with weld ends or clamps according to the standards (DIN 11850, ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

... Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator ...

DN: 15 mm - 200 mm
Temperature: -10 °C - 90 °C

... Weir-type diaphragm valve to DIN/EN with flanged ends, straight-way pattern, for drinking water installations to DIN 1988, DIN-DVGW-approved for water acc. to test W 270, in compliance with the latest elastomers guideline of the German ...

DN: 6.35 mm
Pressure: 0 psi - 150 psi

DN: 0.25 in
Temperature: 0 °C - 120 °C

... . 4kg/cm2; Liquid-Min. 0.2kg/cm2; Max. 4kg/cm2; Special range on request Accuracy: ±5% F.S Material: Body and metal parts-316 stainless steel; Membrane-Teflon, and SS316L on request ...

DN: 0.5 in - 3 in
Pressure: 600 psi

... Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer - SUS316 Packing ...

DN: 0.5 in - 2 in
Pressure: 600 psi

... * Investment casting, ASTM-A351, CF8M, Class 600, Screwed bonnet, Beveled dise, Intégral seat, Rising-stem, and Handwheel. Body - CF8M Bonnet - CF8M Stem - SUS316 Gasket - Teflon Disc - CF8M Packing - Teflon Gland - SUS316 Cap Nut - CF8M Handle ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

... Pressure: PN 10/40, PN100, ANSI #150, #300, #600 Material: Stainless steel: Body 1.4408 Cover 1.4404 Carbon steel: Body 1.0619 Cover 1.4404 Alloy ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C

... actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Size: DN15 - DN250 Pressure: PN 10/40 ANSI #150, #300 Material: Stainless ...

DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C

... a real alternative to pneumatic actuators. •Size: DN15 - DN125 •Pressure: PN 10/40 •Material: Stainless steel 1.4408 Carbon steel 1.0619 •Temperature: Media temperature: -60 °C up to ...

Temperature: 32 °F - 230 °F

... check valve flow controls are typically used to control air flow from air cylinders, thereby controlling the speed at which the piston strokes, either while extending or retracting, depending on their location in the circuit. Flow ...

Pressure: 2,000 psi
Temperature: 32 °F - 230 °F
Flow rate: 85, 170 l/min

... This valve belongs to the MNV-1 Series. It operates at a temperature range between 32 to 230 degrees F. The ports have between 10 and 32 threads. It has an air flow of 6 scfm at 100 psig. It can operate at a pressure maximum of of 2000 ...

DN: 0.125 in
Pressure: 300 psi
Temperature: 32 °F - 230 °F

... The Clippard MNV-4 Series uses an air flow of 0-5 scfm at 100 psig and can handle a maximum PSI of 300 psig. It can be used with air, oil, or water, and can be used in an environment from 32 to 230 degrees. ...

DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and ...

DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs ...

DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C

... The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand extreme working ...

DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 185 °C

... actuator parts (except the seals and design elements) are made from stainless steel. The "Normally closed", "Normally open" and "Double acting" control functions are available. The valve has an optical ...

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

... .500 l/h. The sealing concept of the valve is based on the GEMÜ PD design, whereby the actuator is hermetically separated from the medium. All actuator parts (except the seals) are made from stainless steel. Features ...

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

... whereby the actuator is hermetically separated from the medium. All actuator parts (except seals) are made from stainless steel. The filling valve is available in pneumatic design F40 (and electrical ...

DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar

... Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined or to compensate for flow ...

DN: 25, 40 mm

... Customized, high-quality stainless- steel valve assemblies. Specifications Media liquid ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / PEEK / VITON Cover - Nylon Glass-Filled (Corrosion résistive) with SS Liner Plate - NBR / VITON Life - Three Million Cycle Tested Other Technical ...

DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 110 °C

... 2 way MM BRASS Diamant ball valve with spacer for insulation 2-way MM BRASS with caps and tangs With spacer for insulation, stainless steel components ...

DN: 25, 15, 20 mm
Pressure: 16 bar
Temperature: -20 °C - 110 °C

... 2 way MM BRASS Diamant ball valve with spacer for insulation and manual override 2-way MM BRASS with caps and tangs With spacer for insulation and manual override, stainless steel components ...

DN: 10 mm - 32 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C

... 2 way FF BRASS Diamant ball valve with spacer for insulation With spacer for insulation, stainless steel components ...

DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C

... BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 ...

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...

DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C

... 1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...

... The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off ...

... For your hygienic applications such as milk and juice production, with TORK hygienic actuators human helath is under control. Technical Features Max. Air Pressure: 700 kPa (7bar) Min. Air Pressure: 400 kPa (4bar) Temperature Range: -25C, +90C Body ...

Pressure: 10 bar
Temperature: -30 °C - 130 °C

... The TORK T-KV.W 1320 series wafer type butterfly valve is constructed using stainless steel materials for its base and AISI 316 or 304 for its disc fitting. It generates 10 bar pressure rating, and works ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - Gases - Municipal ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal and industrial ...

DN: 10 mm - 600 mm

... Pinch valves can be used in a variety of applications due to the wide range of materials used for the body and flanges/socket end covers on a pinch valve, such as aluminium, steel, stainless ...

DN: 25 mm - 150 mm
Pressure: 6 bar

... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated ...

DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar

... operated pinch valves: A powder-coated aluminium flange An aluminium flange with steel bushing that comes into contact with the product, powder-coated for more abrasive applications An aluminium flange with ...

DN: 0.5 in - 6 in
Pressure: 0 bar - 60 bar

... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...

DN: 0.5 in - 6 in
Pressure: 0 bar - 19 bar

... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...

DN: 0.5 in - 6 in
Pressure: 0 bar - 7 bar

... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure ...

Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min

... resistance: 27 Ω ± 0.5