DN: 0.5 in - 2 in
Pressure: 16, 40 bar
Temperature: 0 °C - 187 °C
... Modulating valve with stainless steel or brass body. Angled seat pneumatic valve with electronic control of flow rate modulation. Electronic flow modulation with exclusive MAROS technology Parabolic ...
MAROS Engineering
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
... The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve is equipped ...
Gascat
DN: 0.5 in - 3 in
Pressure: 200 psi
Temperature: -50 °F - 400 °F
... TECVAL Tank Blanketing Valves are designed to reduce gas losses on low pressure storage tanks. Devices are manufactured in stainless or carbon steel, sizes from ½” to 3” in flanged or threaded end types. ...
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control and other control applications. The hydraulic control valve ...
Pressure: 0 psi - 400 psi
Temperature: 0 °C - 80 °C
Flow rate: 1 us gal/min - 25 us gal/min
... pump cycling and maintains a preset system operating pressure independent from low or high flow conditions. Valve body is all 316 stainless steel female NPT connection. Supports a hanging load up to 3,400 ...
Pressure: 530, 630 bar
... All parts of 316L steel and counter flanges of X2CrNiMoN22-5-3 1.4462 (DUPLEX) material are used in this valve. Due to the occurrence of working pressures of 530 bar, the valves were manufactured for ...
Zaklady Automatyki POLNA S.A.
... They are designed in different sizes and can be built in galvanized steel or stainless steel, the main technical characteristics are listed below. Construction material: Galvanized steel ...
... Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation ...
MDC vacuum products
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... reinforced PTFE Secondary sealing with a "V-ring" packing (6) to allow sealing under pressure coming from the valve body Gland in stainless steel (24) Wear compensation by the mean of a pair of spring ...
Meca-Inox
DN: 0.25 in - 4 in
Pressure: 68 bar
Temperature: 0 °C - 230 °C
... Stainless steel ball valve Elephant BV.T.Fp.316.230 986 psi, full port, threaded connection, with handle is used as shut-off valves in heat supply systems, water supply, steam, fuel systems with compressed ...
SIMPLE VALVE, S.L.
DN: 65, 120, 90 mm
Pressure: 15 bar
Temperature: -20 °C - 100 °C
... intake valve, controls pressure input, and opens the intake valve; 2. The entire intake valve adopts a heavy hammer check structure, with small pressure loss and no water spraying during emergency ...
RedStar AirCompressor Parts Manufacturing Co., Ltd.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
... Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel. ...
SAF S.R.L.
DN: 0.5 in - 2 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C
... AQUApipe stainless steel pipes 304/1.4301 diameters 18mm to 108mm are compatible with other fittings 18mm to 108mm in material 304/1.4301, 316/1.4401 or 316L/1.4404. AQUApipe press fittings 304/1.4301 diameters 18mm to 108mm are compatible ...
Airpipe Europe
DN: 8 mm - 100 mm
Pressure: 800, 1,000 psi
Temperature: -20 °C - 360 °C
... Shell Wall Thickness: ANSI B16.34 Class 300 • Body: CF8/CF8M • Seat: PTFE/PPL Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator ...
ROPO GmbH
DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C
... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means the PROFLOW butterfly ...
Effast
DN: 80 mm - 250 mm
... Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without ...
... penstocks sealed on all 4 sides. Used for on-off or control applications in wells, tanks, pipe outlets, etc. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals. Available in a wide range ...
DN: 0.125 in - 0.75 in
Pressure: 350 bar
Temperature: -20 °C - 130 °C
... Double-acting flow control valves available from 1/8" to 3/4" bsp, max. working pressure 350 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size) ...
F.lli TOGNELLA
DN: 15 mm - 1,200 mm
... A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe ...
Value Valves Co., Ltd.
DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa
... Sanitary Stainless Steel Sampling Valve Material quality: SS304, SS316L Standard: DIN, SMS, etc Size: DN15-150 or 1"-6", Applied in the stainless steel pipeline system The sampling ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 0.25 in - 2 in
Pressure: 2,000 psi
... EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface ( stainless steel only), ...
BOLA-TEK Mfg.Co
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C
... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...
STÖHR ARMATUREN GmbH & Co KG
DN: 15 mm - 300 mm
Pressure: 6, 16, 25, 10 bar
Temperature: -60 °C - 450 °C
... face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - fixed - rolled stem, disc and seat ring - stainless steel ...
ZETKAMA Sp. z o.o.
... Dimensions: DN04 to DN50 body: stainless steel (1.4571/316Ti) ball + stem: stainless steel (1.4571/316Ti) sealing: plastics, metal Pressure range: up to PN400 (note table of dimensions) Field ...
Pister Kugelhähne
the best suppliers