DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C
... The ZFT2251B series from Dicsa has a body made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It also has a working temperature range ...
Dicsa
... Specification OEM service for Valve body casting Investment Casting Lost Wax Casting Precision Casting CNC Maching Material: Ductile Iron, Cast Iron, Carbon Steel, Stainless ...
BUENO TECHNOLOGY
DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C
... Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, ...
Pipe Valve Flange Factory Landee
DN: 15, 25, 20, 32 mm
Pressure: 30 bar
Temperature: -10 °C - 70 °C
... Pressure reducing and regulating valve with balanced seat, outlet setting from 1,5 to 6 bar, with upstream 500 micron flow filtering system, connections with ring nut and union. ...
BONOMI GMBH
DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
... Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection ...
ERREESSE srl
DN: 50 mm - 255 mm
Temperature: 80 °C
... Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 stainless steel Position Confirmation Magnetic ...
Vortex Global
DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
... General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves are supplied ...
pneumaticairactuator.com
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° ...
DN: 65 mm - 600 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
... Material - Stainless Steel Typology - Static balancing, Metering station Connection - Wafer Stainless steel Wafer metering station For EN1092 PN16 flanges Design according to BS7350 Tolerance ...
VIR
... Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry ...
ODE
DN: 0.5 in - 40 in
... Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast ...
China MED Valve Co., Ltd.
DN: 15 mm - 125 mm
... Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, manual gear, ...
THERMOMESS S.r.l.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 15 mm - 200 mm
Pressure: 40 bar
... Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1. ...
Valvulas VS, S.L.
DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C
... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing seat. 100% ...
Redfluid SL
DN: 100 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 80, 400, 250 °C
... MATERIAL HOUSING :Cast iron, cast aluminium, cast stainless steel 1.4308MATERIAL SLIDING PLATE : Stainless steelSLIDING PLATE GUIDING :Eccentric roller galvanized structural steel / roller stainless ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C
... ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has a strong connection between the V-shaped ...
ChinaTanggong Valve Co., Ltd.
Pressure: 315 bar - 500 bar
Temperature: -20 °C - 120 °C
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 ...
DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C
... / SW / Tapped Options Heating jacket Sight Glass Check valve Electrical continuity Advantages Face to face: ISO5752-S01 (Flanged) Face to face: EN 12982 (BW/SW – stainless steel version) Anti ...
Pressure: 17, 20 bar
Temperature: 210, 220 °C
... The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 and GD-30S are well suited ...
Armstrong International, Inc.
DN: 25 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C
... The INNOVA M-type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is designed for the direction of product flow from the upper to the lower body. To avoid the effect ...
INOXPA
DN: 150 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 90 °C
... epoxy-coating 80μm disc: - stainless steel 1.4408 actuation: - notch lever with grey sleeve approval: - EPDM for water DW-6201CR0174 nach DIN EN 1074-1/-2 (Operating range - 20 °C to +90 °C) installation position: ...
NieRuf Gmbh
DN: 20 mm - 100 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 80 °C
... Fully welded steel ball valve, reduced bore, for natural gas transmission and distribution, BW ends, with handle. ...
Rubinetterie Bresciane
DN: 15 mm - 400 mm
... efficiency by saving energy when opening or closing a gate valve Material Selection for Gate Valves Carbon Steel (A105-WCB, WCC) Low Temperture Carbon Steel (LF2-LCC, LCB) Stainless ...
Zhejiang Jieyu Valve Company
DN: 2 in - 24 in
Pressure: 4.6 bar - 153.2 bar
Temperature: 38 °C - 450 °C
DRAC ENGINYERS, S.L.
... Standards compliance: API 6D, BS 5351, ASME B16.34, DIN 3202 or equivalents » Materials: Cast or Forged Carbon Steel, Stainless Steel, Duplex or Other Specials » Ends Connections: Threaded or ...
Vatac Valves (Wenzhou) Corporation
DN: 2 in - 72 in
... Valves, Gaskets, Screws Pipes (seamless and welded) - Heat Exchanger Tubes - Elbows - Reducers - Tees - Flanges - Bends - Special items as per drawing - Valves and Actuators - Any other Piping Accessories - ...
TPS TECHNITUBE RÖHRENWERKE GMBH
DN: 50 mm - 1,200 mm
... pipeline system; 2.This gate valve requires smaller space and knife gate valve can effectively increase the pipeline strength and reduces possible vibration. 3. Valve disc made of stainless ...
Henan Quanshun Flow Control Science and Technology Co.,Ltd
DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C
... Body in microcast stainless steel CF8M/316 Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing in PTFE and FPM Guided ...
DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar
... Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior sealing performance ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C
... Testing standard: API 598;EN 12266 Design ANSI B16.34,API6D,BS5351,DIN3337 Body Material Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.etc. NACE MR-01-75/NACE ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
DN: 2, 3, 5, 6 in
Pressure: 2,000, 3,000, 5,000, 7,500 psi
... API6A Demco DM Mud Gâte Valve or Mud Valve is engineered for the rigorous requirements of abrasive and erosive service conditions in oilfield applications, such as mud, cernent, fracturing and water service. The DM Gâte ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
DN: 150 mm - 300 mm
... fabricated steel body caters for sizes and specials that fall outside the standard 150, 200, 250 and 300mm cast iron body range as well as offering stainless steel construction. Optional hardened ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
... Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face to face ANSI B16.10 ...
DN: 25 mm - 300 mm
... Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves by Dueker. Just ...
DN: 40 mm - 600 mm
... Features Vacuum butterfly valve - Size from DN40 to DN 600, 1 1/2” to 24” - Investment cast with WCB, SS304(CF8), SS316(CF8M) - Scope of application (pressure) 105~6.7*10-5Pa - Valve leakage rate ≤ 1.3*10-5Pa.L/S ...
Dynamic Corporation Limited
... Zhejiang Kangsaite thread angle seat piston valve has SS head. It is more cost-effective and durable in comparison to the ball valve. It has a compact design and offers quick response. It also eliminates ...
Zhejiang Kangsaite Valve Co., Ltd.
DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C
... Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass ...
GSR Ventiltechnik GmbH & Co. KG
DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C
... Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional Features: V-Port ...
the best suppliers