- Hydraulics - Pneumatics >
- Valve >
- Regulating valve >
- HAWE
HAWE regulating valves
Pressure: 303 bar
Temperature: 121 °C
... sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for a solenoid shutoff valve and temperature controller, requiring no external source of electricity, air or hydraulics. The ...
DN: 15 mm - 100 mm
Pressure: 10 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN10 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 15 mm - 32 mm
Pressure: 6 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 12 mm - 15 mm
Pressure: 6 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 15 mm - 50 mm
Pressure: -8.7 psi
Temperature: -76 °F - 437 °F
Vent valve for pipelines, pipeline systems, vessels and heat exchangers, in which the pressure should not fall below atmospheric pressure. emptying of tanks
Goetze KG Armaturen
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer when connected between the valve and the cylinder to operate. Pressure is being saved and rod speed decreased in the ...
DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw direction (ON), pushing ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
DN: 15 mm
Pressure: 5 bar - 100 bar
Temperature: 0 °C - 60 °C
characteristics ports HPP-1 with valve body G 1/2 - G 3/4, HPP-2 with valve body G 1/2 - G 3/4 media gaseous - liquid - highly viscous -, contaminated operating time ms < 200 media temperature ...
Pressure: 250, 400 psi
Temperature: 180 °F
... the Pressure Reducing Valve. A relief valve of not less than 1/2 inch in size must also be installed on the downstream side of the pressure control valve. Adequate drainage for the relief ...
CLA-VAL Automatic Control Valves
Pressure: 225 psi - 400 psi
... the primary and pilot valve shut tight. Cla-Val Pressure Reducing Valves automatically reduce higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying ...
CLA-VAL Automatic Control Valves
Pressure: 15 psi - 75 psi
Temperature: 180 °F
... between low pressure and high pressure setpoints is adjustable to fine-tune the valve to system requirements. The “water saving zone” below maximum pressure line represents valve effectiveness in reducing ...
CLA-VAL Automatic Control Valves
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 20 mm - 200 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
VF VFT VFH Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 130 °C
... venting valves remove air or gases from systems or pipelines without requiring an external energy input. When a system is drained they act as venting valves. The EB 1.12 bleeding/venting valves ...
MANKENBERG GmbH
DN: 0.375 in - 1.5 in
Pressure: 16 bar
Temperature: 300 °C
single-seat feed or drain valve | suitable for nearly all liquids, also aggressive ones | completely made of CrNiMo-steel (316L) | incl. lever and ball float made of CrNiMo-steel | sturdy technology, smooth surfaces
MANKENBERG GmbH
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
MANKENBERG GmbH
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant which was installed ...
I.L.C. srl
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... Versatility it can be installed for all applications and different products DESCRIPTION BBZPA is a divert single seat valve developed to improve efficiency during maintenance operations. Its EASY MAINTENANCE design ...
BARDIANI VALVOLE S.p.a.
DN: 0.75, 0.5 in
Pressure: 6,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening ...
NOSHOK
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
DN: 10 mm - 600 mm
... PLANTS, as a shut-off valve and/or control valve for limewash, suspensions, etc. PLANT ENGINEERING/POWDER COATING PLANTS, for isolating and dosing powders, paints, etc. CONSTRUCTION INDUSTRY/CEMENT ...
AKO ARMATUREN
DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar
... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...
AKO ARMATUREN
DN: 25 mm - 450 mm
Pressure: 3, 4, 2 bar
... operated pinch valves of the RVA series can be made with a flange connection complying with ANSI B 16.5- 150lbs, if required. Structure of RVA series The RVA series air operated pinch valves consist ...
AKO ARMATUREN
DN: 0.375 in - 4 in
... operation. Diverter and various multiport configurations are available upon request. Reference standards 48 and R48 series valves are designed and tested according to ASME BPE standard. EC 1935 compliance – as an option.
HABONIM
DN: 0.5 in - 6 in
... drainability are essential for product quality. Patented HermetiX™ stem seal, made from FDA-approved polymer materials. The valve port diameter is identical to the tube inner diameter so that no expansion or contraction ...
HABONIM
DN: 0.5 in - 2 in
... operation. Diverter and various multiport configurations are available upon request. Reference standards 48 and R48 series valves are designed and tested according to ASME BPE standard. EC 1935 compliance – as an option.
HABONIM
Pressure: 30 psi - 150 psi
Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...
DN: 3 mm - 24 mm
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...
SOCLA
DN: 10 mm - 100 mm
Pressure: 16, 20, 10 bar
Temperature: 80 °C
general processes, heating and multi-fluid applications compatible with brass BALL : hard chrome-plated brass SEALS : PTFE
SOCLA
DN: 15 mm - 50 mm
Pressure: 20, 25 bar
Temperature: -20 °C - 80 °C
general processes, heating and hall fluid applications compatible with brass BALL VALVE : brass Full bore BALL : hard chrome-plated brass SEALS : PTFE With drain off cock and plug
SOCLA
Temperature: -45 °C - 260 °C
KLINGER BALLOSTAR® KHI BALL VALVES Decades of reliability guaranteed KLINGER Ballostar® KHI ball valves will keep up with stricter requirements and are assured to already meet future standards with ...
Pressure: 5 bar
... Rotary Tube Selector Valve diverts pneumatically conveyed powders and granules from one line up to any of sixteen lines. Flow can also be converged from multiple lines into one line. Valve is often used ...
GEA Colby
Pressure: 500,000 Pa - 700,000 Pa
... Selector Valves are flow diversion valves that employ an axially mounted plate to control the flow of pneumatically transported materials. Flow may be diverted to one of two tubes, which intersect at ...
GEA Colby
... all product contact areas for frequent cleaning, making these valves suitable for use in all dairy, food, pharmaceutical & chemical applications - powder or granular. Configuration: Valves come as standard ...
GEA Colby
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining