DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...
DN: 65 mm - 80 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... sanitary pilot operated pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...
DN: 15 mm - 50 mm
Pressure: 0.3 bar - 5 bar
Temperature: 0 °C - 180 °C
... sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials ...
DN: 2 in - 48 in
Pressure: 16 bar - 160 bar
Features: Butterfly valve is for regulating or cut off in the pipeline and very low efficient cost. It is applied in a lot range of pipeline like petroleum,chemical, power plant,water supply etc. The ...
The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a ...
DN: 0.125, 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 80 °C
Throttle valve, both directions throttling (B) quick connector Hose 5/3, G 1/8, For throttling flow rates and regulating the piston speed of cylinders. Small dimensions, ideal for tight spaces. To ...
RIEGLER & Co.KG
DN: 6 mm - 50 mm
Pressure: 250, 500, 400, 315, 420 bar
Temperature: -20 °C - 100 °C
Locking devices on request Position switches on request Detent on request
DN: 6 mm - 50 mm
Pressure: 420, 315, 400, 250 bar
Temperature: -30 °C - 100 °C
Actuators Position switches on request Detent on request
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
DN: 40 mm - 100 mm
Pressure: 4 bar - 10 bar
Temperature: 130, 150 °C
... special on the market this variant of the double seat bottom seat valve, in addition, the function of a changeover valve is realized. The advantage over the usual pass dual seat bottom seat valves ...
Overview Bellows sealed globe valve for chemical applications with safety gland packing in straight type, y-type or corner-type; with flanges or buttweld ends; can be supplied in carbon steel 1.0619 / WCB, stainless ...
DN: 15 mm - 800 mm
Pressure: 40, 25 bar
Temperature: -10 °C - 200 °C
... 1092 full bore KLINGER Ballostar-KHI - 2-piece Ball Valve Ball valve for rough use! For use everywhere reliable functioning is required, where large nominal diameters are used and where ...
KLINGER-SCHÖNEBERG GmbH
DN: 150 mm - 1,000 mm
Pressure: 25, 40 bar
Temperature: -10 °C - 200 °C
... customers requirements full bore KLINGER Ballostar-KHI - 2-piece Ball Valve Ball valve for rough use! For use everywhere reliable functioning is required, where large nominal diameters ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges ...
KLINGER-SCHÖNEBERG GmbH
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...
DN: 1.5 in - 6 in
GAS VALVES Floating ball valves Ball valves are cut off devices suitable for use both on natural gas distribution network and for liquid service when high performance on thightness ...
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C
In the EFC Dispensing valves, the position of the precision throttle directly connected to a stepper motor determines the flow rate. This drive technology allows the set position to be held even without power. Variants ...
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
DN: 0.25 in - 0.75 in
Pressure: 40 bar
Temperature: -20 °C - 80 °C
Threaded BSP or NPT direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.5 in - 1 in
Pressure: 16 bar
Temperature: 0 °C - 220 °C
Threaded BSP/NPT or flanged direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
... aperture control and an externally mixing spray nozzle. The quantity of water injected is regulated by an upstream control valve. This valve adjusts the injection water pressure in front of the nozzles ...
DN: 10 mm
Pressure: 0 bar - 510 bar
Flow rate: 0 l/min - 400 l/min
The pressure relief valve for connecting the DN10 has a maximum liter capacity of 400 l /min. The operating pressure can be set max.510 bar.
DN: 12 mm
Pressure: 0 bar - 510 bar
Flow rate: 0 l/min - 400 l/min
The pressure relief valve for connecting the DN12 has a maximum liter capacity of 400 l /min. The operating pressure can be set max.510 bar.
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min
DN: 1.5 in - 4 in
Pressure: 0.5 bar - 10 bar
... •Control of main valve: by built-in solenoid pilot valve •Applications : For water distribution, where downstream pressure should be reduced, the valve is commanded to open Description G500-PREL ...
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high precision in ...
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
DN: 40 mm
Pressure: 0 bar - 0.6 bar
Temperature: 5 °C - 90 °C
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single ...
A. u. K. Müller
Pressure: 4 bar - 6 bar
Jet Edge’s patented Dual Pressure Valve is a remotely mounted valve that allows waterjet operators to control water pressure independently of the intensifier pump. This enables operators to run a number ...
DN: 1.813 in - 11 in
Pressure: 2,000 psi - 20,000 psi
... gate valve is designed for positive control of high-pressure frac valves and for many subsea and drilling applications. This design is a combination of our field-proven FLS gate valve ...
CAMERON
DN: 15, 20, 10, 25, 32 mm
Temperature: -40 °C - 120 °C
... a normally closed valve which means that it will move to a fully closed position in the event of a power loss. This feature reduces complexity by eliminating the need for an upstream solenoid valve or ...
Parker Refrigerating Specialties Division
DN: 8 in - 16 in
Pressure: 450 psi
Temperature: 121, 111 °C
... Type (S)ORIT evaporator regulating valves have a brass body and extended copper connections. They are available with a range of adjustable settings and pressure tap. The primary function of these valves, ...
DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C
Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up to 40 bar; all internal parts are ...
DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F
Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...
Please specify:
Help us improve:
remaining