- Hydraulics - Pneumatics >
- Valve >
- Regulating valve >
- HAWE
HAWE regulating valves
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
DN: 10 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 110 °C
... points without relay or 2 points with relay connection ACCESSORIES UPON REQUEST • - Actuator override. to activate the valve in case of emergency or black-out (not available for 4 and 12-second version). • - One ...
Comparato Nello S.r.l.
DN: 25, 15, 20 mm
Pressure: 64 bar
Temperature: -10 °C - 110 °C
... general, using hot and cold fluids • - automation Systems ACCESSORIES UPON REQUEST • - Actuator override. to activate the valve in case of emergency or black-out (not available for 4 and 12-second version). • ...
Comparato Nello S.r.l.
DN: 15, 10 mm
Pressure: 64 bar
Temperature: -10 °C - 110 °C
... suitable valve body • - Systems using alternative energy • - thermal solar Systems • - industrial Systems in general, using hot and cold fluids • - automation Systems ACCESSORIES UPON REQUEST • - Actuator override. ...
Comparato Nello S.r.l.
DN: 0.375 in - 4 in
... operation. Diverter and various multiport configurations are available upon request. Reference standards 48 and R48 series valves are designed and tested according to ASME BPE standard. EC 1935 compliance – as an option.
HABONIM
DN: 0.07, 0.375 in
Pressure: 0 psi - 250 psi
... to protect a pneumatic actuator such as a chuck, press, or gripper from sudden bursts of high pressure. The internal needle valve restricts the initial movement of the actuator to a user defined speed, and then opens ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 0 psi - 500 psi
Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The MBVMD allows bi-directional flow between a common inlet port on the bottom ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
... selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between ...
Beswick Engineering Co, Inc.
... is designed for pneumatic pressure and pneumatic suction conveying systems. The intelligently engineered two-way diverter valve allows powdery and granular materials to be conveyed in the food and animal feed industries.
DN: 100 mm - 1,000 mm
The rotary bin discharger AHBG is designed for discharging mealy or granular bulk materials from storage bins and hoppers to downstream processing machinery and scales in grain & oil, feed and food processing industries.
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve shuts the ...
DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C
... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► ...
DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically
DN: 3 mm
Pressure: 0 bar - 200 bar
... Control- and shut-off valves (e.g. for the pressure regulator outlet) For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 50 bar (control valve) ...
DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C
... Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. E series ...
Metso Automation
DN: 50 mm - 600 mm
Pressure: 0 bar - 10.3 bar
Temperature: -40 °C - 175 °C
... with the disc during valve opening and closing, there is minimal disc impingement. This is in contrast to conventional butterfly valves where disc impingement leads to shaving of the seat, decreasing ...
Posi-flate
DN: 15 mm - 100 mm
Pressure: 160 bar
Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port ...
RTK Regeltechnik Kornwestheim
DN: 10 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C
... angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
Diaphragm valve - R690 The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 5 bar
Temperature: -10 °C - 100 °C
The GEMÜ 660 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve was designed for dosing and filling a wide range of products. All metallic actuator ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive ...
FIP - Formatura Iniezione Polimeri
DN: 40, 100, 50, 65, 80 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 60 °C
Butterfly valve with multi-volt electric actuator 90-240 V AC 50-60 Hz. The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications. In ...
FIP - Formatura Iniezione Polimeri
A Pilot operated 3, 5-port valve with built-in pressure sensor has been added to the 4GB*R Series.The pressure sensor has been integrated with the valve for preventative maintenance. It can be used for ...
CKD
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand ...
Maximator GmbH
DN: 1 in
Pressure: 0 bar - 2,965 bar
Maximator high pressure valves with métal to métal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability ...
Maximator GmbH
DN: 0.125 in - 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C
The selective valve is mainly used to guide or control two different inputs which either chooses one or another but uses only a single a way out.
DN: 3 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C
VQS condensed drain valves are necessary to secure the optimal status of all different components of a compressed air treatment system. Electric and timed, it’s programmable to discharge the drain in a specific time ...
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is ...
DN: 0.25, 0.375 in
Pressure: 700 bar
... diaphragm pressure regulator MR or the electronic pressure control system C MOVE which in connection with the electronic control valve Move 1250 or Move X controls the gas flow at a individual configured pressure.
DN: 0.5 mm - 0.9 mm
Pressure: 7 bar
Temperature: -10 °C - 50 °C
DN: 1.2 mm - 1.6 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 50 °C
... excessive pressure. It 'necessary to apply these valves when the elements to be lubricated are enclosed in tight enclosures or protected by a ring gasket. When the pressure calibration of valve is ...
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF position. This provides a simple, ...
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate ...
DN: 80 mm - 250 mm
Pressure: 10, 8 bar
Temperature: -30 °C - 180 °C
Wafer type butterfly valve for installation between flanges EN 1092, PN 10, one-piece body with centring lugs, end-to-end valve stem, flat disc design with excellent flow characteristics. The setting ...
GEFA Processtechnik
... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete with 1 or 2 Microswitches ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining