HAWE regulating valves

DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F

Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...

DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C

... pressure. The Parer LAC pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser ...

DN: 50 mm
Pressure: 690 bar
Temperature: -34 °C - 149 °C

CC metering valve is rated to 10,000 psig / 690 bar and contains a non-rotating stem to reduce seat and stem wear. The valve features over 20 turns from shutoff to full open, providing excellent flow ...

DN: 0.5 in - 2.125 in
Pressure: 680, 700 psi
Temperature: -40 °F - 240 °F

Parker-Sporlan’s CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves are suited for ...

DN: 0.75 in - 1 in
Pressure: 103, 10.3 bar
Temperature: -40 °C - 82 °C

... high-pressure shut-off valves serve to provide overpressure protection by containment. Type 634 shut-off valve with internal registration is installed between a pressure reducing regulator and a downstream ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C

Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...

DN: 50 mm - 200 mm
Pressure: 16, 10, 25 bar

... Face-to-face length: acc. to EN 558, basic series 1 With flange ends on both sides acc. to EN 1092-2 Control valve in globe valve design With rising stem With position indicator ...

Pressure: 2 bar
Temperature: 100, 150 °C

High precision control valves for vacuum steam, with pressure reducing valve as their base (integral separator & trap). Automatic multi-control valves consisting of pilot-operated ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

... control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to control the flow ...

DN: 0.5 in - 4 in
Pressure: 150 psi
Temperature: 73 °F - 180 °F

... Chemtrol® valves for the most reliable, versatile and economical valve option in commercial and industrial applications. Chemtrol® ball valves are backed by a 1-year limited warranty. ...

Pressure: 4,500, 2,500, 3,000 psi
Flow rate: 40 us gal/min

The CROSS SSD4 series selector valves are 6 way, 2-position units with cast-in metering notches for smooth operation. They provide an economical way of diverting flow to two separate hydraulic circuits. Features: SSD4: ...

DN: 100 mm - 400 mm

Two-way valves with inlet collar, symmetrical, fitted with pneumatic rotary actuator Press formed and fully seam welded, complete with lipped ends for pull ring connection, this valve is pneumatically ...

DN: 50 mm - 225 mm
Pressure: 0.8 bar - 4 bar
Temperature: -10 °C - 80 °C

Applications The two-/three-way hose-type diverter valve ZWS/DWS is a distribution or collection unit for pneumatic conveying systems up to 4 bar (g) of powders and pellets in various industrial sectors. Design characteristics ...

DN: 25 mm
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 300 l/min

Series VR5U08 Nominal Size Inch 1" mm 25 Maximum Flow gpm 80 lpm 300 Maximum Pressure psi 5000 bar 350 Mounting Flange

Pressure: 207 bar - 700 bar
Flow rate: 3 us gal/min - 8 us gal/min

... or used remotely with hoses Compact 4-way, 3-position valve 3,000 - 4,000 psi (207 - 275 bar) return line ground dump safety valve Controlled advance and built-in hold feature Single-acting valve ...

DN: 25 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

Features •Cost-effective alternative to bottom drain valves •Maximum reliability: one piece ball/stem unit avoids weak spot ball to stem •Universally applicable: many options in combination with a thick-walled PFA ...

DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C

... SAUTER Valveco compact regulating valve provides correct supply to the consumers and a reduction of temperature variations in the room, so that the use of energy is more accurate and more efficient. Features Regulating ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_valve_body: ...

DN: 100 mm - 2,000 mm
Pressure: 50 bar
Temperature: -50 °C - 200 °C

MONOVAR® is the energy dissipating valve Application of MONOVAR®: - Water supply systems (reliability, pressure, cavitation), - Industrial flow, cooling and mixing systems (cavitation, sensitivity, pressure, reliability), ...

K-Tron Aeropass Valve aim at transferring the material straight on to a Hopper allowing to be used in non-authorized spaces. It consists of an instant switch off material on total filling of Scale Hopper. Aeropass Valve ...

Pressure: 100 psi

Change direction of air-conveyed material The 15 Degree Switch is available in a two-way or three-way type. The full bore design permits unrestricted material flow to minimize material degradation and pressure drop to make conveying ...

DN: 25 mm - 320 mm
Pressure: 75 mbar - 1,000 mbar
Temperature: 35 °C - 150 °C

Field of application: Semiconductors, FPD / CVD systems and industrial processes.

... such as downstream valves and controllers, upstream valves and controllers, vacuum isolation valves and integrated solutions. MKS manufactures downstream pressure control subsystems ...

DN: 0.25 in - 0.75 in
Pressure: 10 bar

... offers a wide variety in PVC-U valves for different applications and some very specific uses: Rotary disc valves for the flow change in an installation. Drain valves for tanks ...

DN: 400 mm - 1,200 mm
Pressure: 10 bar - 16 bar

... water hammer effects. From the closed position, the by-pass equipped with a gate valve and dimensioned to 1/10 of the nominal width is opened first and only then the main valve.