Lapp plastic fittings

... made of special FDA-approved Viton®. These fittings do not contain technopolymers, thereby avoiding problems of compatibility with detergents and other chemical agents. This choice of materials allows the fittings ...

Diameter: 10, 6, 4, 8 mm
Operating pressure: -0.99 bar - 16 bar

... Push-in fittings Series F PLUS The family of Push-in fittings for use in the food industry expands with the introduction of two new Series: F-E PLUS and F-NSF PLUS Series. In fact, in addition to the ...

Diameter: 0.5, 0.75, 0.375 in
Operating pressure: 29 psi - 174 psi

With the largest passage diameter in the prevoS1 range and a composite body, the new 11EB coupling is recommended for uses requiring high flow in garages, workshops and for industrial applications. This new coupler is equipped with ...

Diameter: 6 mm - 8 mm
Operating pressure: 0 bar - 12 bar

The prevoS1 range of compressed air couplings facilitate the user’s day-to-day work. These quick couplings can be connected and disconnected safely with a single press. Quick and easy tool changes optimise work and efficiency. General ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

BSPT male thread R 1/8 Temperature 0°C to + 60°C Construction Polymer and nickel-plated brass

Diameter: 6 mm - 8 mm
Operating pressure: 12 bar

The Stäubli ERS quick-release coupling range can be used for fast, direct connection of pneumatic tools. The non-scratch design protects your surfaces and makes the ERS coupling ideal for assembly and finishing workshops. Easy to ...

Diameter: 12 mm - 50 mm

TPR flexible hose fittings As for TPR hoses, we have created a brand new range of RTPR fittings. RTPR fittings from 3/8” to 1” are made with self-extinguishing PVC, while the larger ...

Diameter: 0.13 in - 0.5 in
Operating pressure: 80 bar

Series S2000 pipe fittings are characterized by great reliability of female threads, both BSP and BSPT, with non-flat surfaces. The pantented Sprint models are provided with a particular torque system which avoids the ...

Diameter: 0.13, 0.06, 0.09 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 16 mm - 110 mm

... with makes your life easy: no need to dismantle the fitting to install or uninstall, and all the components remains into the nut. Thanks to this high integrity, there are no falling parts from the fitting ...

Diameter: 20 mm - 63 mm

... of transition fittings with element brass threaded molded in the polypropylene body, suitable to join hydraulic equipment and threaded metal pipes with polyethylene pipes from d 20 up to d 63 mm. The ...

Diameter: 16 mm - 125 mm
Operating pressure: 16 bar

PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...

Diameter: 40, 50 mm
Operating pressure: 4 bar

Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on rigid PVC-U ...

Diameter: 14 mm - 66 mm
Operating pressure: 10 bar

Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 10 mm - 63 mm
Operating pressure: 16 bar

Connections - solvent spigot – hose nozzle Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 4, 6, 0.13 mm
Operating pressure: 10 bar

... lightweight coupling for air supply lines to medical and scientific equipment. It has a compact design, and has a body made of plastic. It is ergonomic as the plug only needs to be pushed in to the socket for connecting, ...

Diameter: 0.25, 0.38 in
Operating pressure: 15 bar

Hi Cupla Ace is a plastic coupling suitable for both air and water applications. Since it is made from plastic, it is lightweight and minimizes risks of damaging or denting various surfaces. However, ...

Diameter: 0.75 in - 4 in
Operating pressure: 2 bar - 18 bar

Nitto presents lever lock Cupla quick connect couplings. The plug and socket are connected without fail with a light lever pull-down. This makes them prepared to flow liquid or gases. The Cupla is compatible with a range of low-pressure ...

Diameter: 4 mm - 12 mm
Operating pressure: 1 bar - 10 bar

ORIENTING FLOW REGULATOR FOR CYLINDER “UNIVERSAL SHORT” The fuction fittings of Aignep have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) ...

Diameter: 50 mm - 150 mm

PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, ...

Diameter: 50 mm - 150 mm

... threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching ...

Diameter: 32 mm - 300 mm

screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots ...

Diameter: 3 mm - 54 mm

Polyamide fitting Colour -black, grey Material - Polyamide Protection class - IP 55 Temperature range - -30°C to +80°C Variant - PG, Metric Polyamide fitting clip Colour - black Material - Polyamide Temperature ...

Diameter: 18.7 mm - 39.5 mm

Polyamide fitting 90 Colour: grey, black Material: Polyamide Protection class: IP 55 Temperature range: -30°C to +70°C Variant: PG, Metric

Operating pressure: 10 bar

Compression fitting for plastic and metal composite tubes Compliance - UBA Material - Nickel-plated brass Max. operating temperature drinking water - 95 °C Max. operating temperature heating - 120 ...

Cap nut - : - Brass with nickel plated Conduit holder - : - PA6 Armour clamp - : - Brass Gland body - : - Brass with nickel plated O-ring - : - NBR Connection thread - : - Metric (EN60423) / PG (DIN 40430) Protection class - : - ...

Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar

... spiral to improve static electricity discharge. Plastic wire (Vena Sil 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L Stainless steel SZR crimp fittings Molded ...

Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar

... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...

Diameter: 4, 6 mm

... connectors which are normally fitted with sealing rings may ONLY be used to connect RIGID tubes made of polyethylene or polypropylene etc. For FLEXIBLE tubes out of PVC, FPM or PTFE, a connecting adapter MUST be used. ...

Diameter: 8 mm

... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, ...

Diameter: 6 mm

... male connector with barbed fitting for flexible tube -Thread size: G 1/4" -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa

... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...

Diameter: 3 mm - 12 mm
Operating pressure: -0.1 MPa - 0.6 MPa

Tube Fitting EG type adopts antistatic resin material. Best suitable for the environment dislikes static electricity. For price options, please contact our distributor near your office. https://www.pisco.co.jp/en/company/network/

Diameter: 10, 12, 4, 6, 8 mm
Operating pressure: -0.1 MPa - 0.9 MPa

... Nickel-plated brass is used for the metal body and HNBR for the seal material. Thermal oil, clean water and air can be admitted. Fitting part can be removed from thread part. Prepare the molding die according to ...

... : Black • - Material: Polyamide/Nylon 6.6 • - Number of Batteries: 0 • - Product Name: plastic fitting for conduit • - Product Type: Conduit Fitting with NPT Threads • - Size: NC 34mm

Diameter: 12 mm - 60 mm

New Type Quick Connector for Flexible Pipes - Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved Nylon PA66 (Flammability UL94V-2) Wording temperature：-40℃-100℃ in ...

Operating pressure: 100 psi

Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. SPECIFICATIONS ACCURACY: See “Precision Orifices” MATERIAL: FDA Approved Polysulfone/Polycarbonate MAX. ...

Operating pressure: 100 psi

Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...

Manufacturing Process CNC Machining & Injection Molding Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range ...

Diameter: 10 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ...

Diameter: 10 mm - 56 mm

Plastic connector, straight, outer thread metric or PG, incl. ferrule and sealing Material: plastic [PP] Temperature range: -10°C ... +110°C Prot. rate [acc. to EN 60529]: IP54

Diameter: 10, 8, 6, 4, 12 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max ...

Diameter: 4, 8, 6 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max ...

Diameter: 8, 6, 4 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual ...

Diameter: 4 mm - 16 mm

... Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible with both Nylon & PU pipes Robust ...

Diameter: 4 mm - 16 mm

... Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible with both Nylon & PU pipes Robust ...

Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar

With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. All fittings ...

Diameter: 3 mm - 15 mm

The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow ...

Diameter: 3 mm - 15 mm

... connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene fluoride ...

Diameter: 4 mm - 17 mm

... Burkle universal hose tubing connectors for diameters from 4 to 17 mm feature conical nozzles and can be made out of PP or PVDF. The PP type has heat resistance up to 135 °C, while the PVDF type has heat ...