THE LEE COMPANY self-priming pumps

Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 90, 80 l/min
Head: 58, 34 m
Power: 0.7, 1 kW

Centrifugal selfpriming multi-impeller water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. Universal pump for civil and industrial ...

Flow: 25, 55 l/min
Head: 14, 19 m
Power: 0.37, 0.75 kW

... functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. The special selfpriming system allows priming up to 8 meters depth. The ...

Flow: 50 l/min
Head: 38, 42, 46 m
Power: 0.6, 0.75, 0.7 kW

Selfpriming jet water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable ...

Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm

... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...

Flow: 0.12 l/min - 1.52 l/min

Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...

Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m

... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...

Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in

Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in

Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch

1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure Range (Deadhead) ：60,000psi Flow ...

Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch

Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in

Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 b Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar - 280 Nlpm SPECIFICATIONS: Lower ...

Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... : direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 B Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar - 280 N.l.p.m. SPECIFICHE: Lower ...

Flow: 27 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... application: direct priming for medium viscosity products use: transfer PERFORMANCE: Ratio - 2:1 b Max Rec'd Cycles / Minute - 70 Displacement Per Cycle - 450 cc Air consumption @ 6 bar - 950 Nlpm SPECIFICATIONS: Lower ...

Flow: 4.5 l/min
Pressure: 130,000 Pa
Input diameter: 4.9, 2.8 mm

Mini Diaphragm Vaccum Pump TM30B-H Motor Type:Brushless DC motor Max flow rate:4.5L/min Max pressure:130Kpa, Max vacuum: 65Kpa Voltage:6V/12V /24V Ideal Life Time:10000 Hours Working Mode:Continuous ...

Flow: 0 l/min - 3 l/min
Head: 6 m
Weight: 900 g

Mini Diaphragm Liquid Pump TF51-C Motor Type:Brushless DC motor Max flow rate:3L/Min Water lift:6M Voltage:12V 24V Ideal Life Time:10000 Hours Functions:Can dry-running, Self-priming ■ ...

Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m

TF30B-H Micro Diaphragm Liquid Pump Motor Type:Brushless DC motor Max flow rate:water:0.35L/Min, gas:4.5L/Min Water lift:≥10M , Max vacuum: 60Kpa Voltage:12V/24V Ideal Life Time:10000 Hours Pump ...

Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm

LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...

Description USB connectable plug&play syringe pump for jfermi bioreactor

Flow: 0.0007 l/h - 0.02 l/h

Peristaltic pump peristaltic, pump, jFermi, 3D, modelperistaltic, pump, jFermi, 3D, model $300.00 Additional or replacement pump (Feed/Acid/Base/Antifoam) for ...

Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C

ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...

Flow: 190, 320, 440, 40 l/min
Pressure: 1 bar - 7 bar
Length: 215 mm

... reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small and compact design Fast priming and immediate product flow Adjustable ...

Flow: 120, 230, 300 l/min
Pressure: 1 bar - 7 bar
Length: 190, 200 mm

... reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small and compact design Fast priming and immediate product flow Adjustable ...

Flow: 150, 110, 70, 20 l/min
Pressure: 2 bar - 12 bar
Height: 680 mm

The proven performance of self-priming piston transfer pump allows accurate handling and transfer of a wide range of fluids, guaranteeing efficient operation, maximum productivity and ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...

Flow: 20 l/min

The solvent pump is ideal for pumping highly pure liquids. Solvents are easily filled with this pump which is foot-operated. It is built for industrial use and is huge yet durable. The discharge tube ...

Flow: 20 l/min

The V2A 1.4301 barrel pump from Bürkle is equipped with PTFE gaskets that allow minimal maintenance and long service life. Designed with stainless steel material, this pump is capable of handling flammable ...

Flow: 56 l/min
Power: 220 W

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose ...

Flow: 40 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional ...

Flow: 50 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

Flow: 2.5 l/min - 46.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The PM V103 gear pump was designed for transfer and dose chocolate and its derivatives. These applications require temperature control to keep all their properties and characteristics. The temperature constancy is essential ...

Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm

... of the quietest and most compact pumps in its class Available in Polypropylene, PVDF (Kynar ®), and conductive Acetal (ATEX Compliant). Conductive Acetal units can be grounded for pumping volatile ...

Flow: 0 us gal/min - 192 us gal/min
Length: 505, 445 mm
Width: 319 mm

... Versamatic’s 2" pump is the ideal solution for applications where aggressive chemicals are being moved. These pumps feature wear-reducing components and chemical-resistant materials that further improve ...

Flow: 0 us gal/min - 6.8 us gal/min
Weight: 1.4, 2.04 kg

Small yet powerful, Versamatic’s ⅜" (10mm) bolted plastic air-operated double-diaphragm (AODD) pump can pump up to 6.8 gpm (26 lpm). Featuring a patented air valve system, count on ...

Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for ...

Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for ...

Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for ...

Flow: 1.2 m³/h

Manual rotary pump Descriptive Construction materials Body and cover: steel Body waterproofing: O-ring Shaft waterproofing: seal lining Specifications and advantages ...

Flow: 1.2 m³/h

... advantages Manual rotary pump Characteristics More Information FLUID Diesel, Oil TECHNOLOGY Barrel-emptying, Rotary ATEX No PUMP Equipped PUMP SETS ...

Flow: 2.4 m³/h

Manual membrane pumps Descriptive Construction materials Manual pump for dense liquids or liquids with suspended solids (agricultural or food sectors: beer, wine, ...

Flow: 1 l/min - 450 l/min
Pressure: 1 bar - 1.6 bar
Head: 1 m - 16 m

The SAM and MAC pump series come from deep studies and tests in centrifugal outlet pumps and are employed in whirlpool, industrial or zootechnics applications. Easy to install thanks to their compactness, ...

Flow: 100 l/min - 13,333.33333 l/min
Pressure: 1 bar - 1.9 bar
Head: 1 m - 19 m

Originally designed for spa pools, SAM2 pumps, coming from innovative studies in the field of centrifugal pumps, are easily employed in different applications with high hydraulic demands of domestic, ...

Flow: 10 l/min - 2,000 l/min
Pressure: 0.5 bar - 0.7 bar
Head: 1 m - 7 m

Centrifugal pumps From innovative studies, these compact high performing centrifugal pumps - specifically designed for whirlpool bathtubs - are naturally employed in different fields ...

Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg

... No problem! The WIWA INJECT ND 1 is an pneumatically operated diaphragm pump for low-pressure applications and is particularly suitable for processing suspensions. The self-priming device is flexibly ...

Pressure: 32, 16, 48, 24 bar
Weight: 7.2, 8.1 kg

Robust Reliable Suitable for different container sizes With our pneumatically driven piston pumps for transferring oil, you always have a reliable partner on hand. The robust 40 and 82 series have a 2'' bung fitting ...

Flow: 10 m³/h
Pressure: 4 bar

LOW PRESSURE HOSE PUMPS Reduce maintenance downtime... Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or which tend to froth or those ...

Flow: 150 m³/h
Pressure: 15 bar

HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump ...

Flow: 0 m³/h - 51 m³/h
Power: 2.2, 4, 5.5, 7.5 kW

... SERIES SELF-PRIMING CTS is an open impeller self-priming centrifugal pump, manufactured from AISI 316L stainless steel.The self-priming feature allows ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: ...

Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C

- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw ...

Flow: 320 l/h
Pressure: 0.4 bar - 2.5 bar
Power: 65 W

- Full PTFE bellows pump - Explosion-proof version according to ATEX suitable for gases of zone 1 and for mounting in zone 1 - Pump head can be rotated in 90° steps and connected to the gas line from ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

... This could even cause the pump to become completely blocked. To maintain the temperature of the chocolate and avoid it solidifying inside the pump we recommend fitting a heating jacket to the front ...

Flow: 115 m³/h
Pressure: 16 bar
Fluid temperature: -10 °C - 140 °C

The HLR pump is a hygienic rotary lobe pump designed in compliance with the EHEDG specifications for plants and processes that comply with the strictest hygienic requirements. Due to the low working speed, ...

KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...

Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm

CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical ...

Flow: 0.1 l/min - 10 l/min
Pressure: 0.1 bar - 5 bar
Head: 17 mm - 40 mm

Custom Design and Manufacture Vacuum Gas Liquid and Brushless Miniature Pumps With Compact Size and Light Weight.

Flow: 0.3 l/min
Pressure: 3, 4 bar
Head: 30 mm

CMP30L,micro water pump,mini membrane pump,liquid micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow ...