{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.5 in
Pressure: 4,000 psi
Temperature: 85 °F
... The poppet in this miniature shuttle valve is biased so that the emergency port (E) is normally closed and the normal (N) and service (S) ports are connected. It is ideal for applications with flow rates up to 20.4 GPM. - Type: Spring-Biased - ...
THE LEE COMPANY
DN: 5.47 mm
Pressure: 40 bar - 280 bar
... threadless, cartridge-style valve (also known as a bleeder valve) provides an innovative solution to removing trapped air within a pressurized system to increase system efficiencies while minimizing hydraulic losses. ...
THE LEE COMPANY
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... This miniature shuttle valve incorporates a polyimide valve seat to create a leak tight seal when tested on nitrogen. It incorporates a detent mechanism that can latch the poppet at either of the inlet ports, making it ...
THE LEE COMPANY
DN: 0.5 mm
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... This miniature shuttle valve uses a non-biased, loose ball design, making it helpful when flow is uni-directional from both inlet ports. It is ideal for applications with flow rates up to 23 GPM. - Type: Selective - Diameter: 0.500 inches - ...
THE LEE COMPANY
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... The poppets in this miniature shuttle valve are designed to allow the lower inlet pressure to flow while the higher inlet pressure is blocked. This valve is ideal for applications with flow rates up to 20 GPM. - Type: ...
THE LEE COMPANY
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... The poppet in this miniature shuttle valve is biased so that the emergency port (E) is normally closed and the normal (N) and service (S) ports are connected. It is ideal for applications with flow rates up to 20.4 GPM. - Type: Spring-Biased - ...
THE LEE COMPANY
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... This miniature shuttle valve incorporates a detent mechanism that can latch the poppet at either of the inlet ports, making it helpful when bi-directional flow is needed in either poppet position. It is ideal for applications with flow ...
THE LEE COMPANY
DN: 5.47 mm
Pressure: 28 MPa
Flow rate: 7.95 l/min
... This threadless, cartridge-style shuttle valve is a selective, non-detented, loose ball, three port isolation valve for use in hydraulic manifolds. The valve’s locking end uses the field-proven Lee Controlled ...
THE LEE COMPANY
DN: 0.375 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... The poppet in this miniature shuttle valve is biased so that the emergency port (E) is normally closed and the normal (N) and service (S) ports are connected. It is ideal for applications with flow rates up to 10 GPM. - Type: Spring-Biased - ...
THE LEE COMPANY
DN: 0.375 in
Pressure: 0 psi - 5,000 psi
Temperature: 85 °F
... This miniature shuttle valve uses a non-biased, loose ball design, making it helpful when flow is uni-directional from both inlet ports. It is ideal for applications with flow rates up to 13 GPM. - Type: Selective - Diameter: 0.375 inches - ...
THE LEE COMPANY