Volumetric flow rate: 0.5 l/min - 750 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Body material - Transparent acrylic Connection material - Polypropylene, ABS ( on request ) Float material - Stainless steel Seal material - Silicone, FPM ( on request ) Thread connection - 1/2″ – 3/4″ – 1″ – 1 1/2″ – 2″ G depending ...
ELETTROTEC s.r.l.
Volumetric flow rate: 0.4 l/min - 40 l/min
Process temperature: 0 °C - 180 °C
Process pressure: 20, 25, 8 bar
In parallel connected circuits flow changes might remain undetected as the flow of medium is distributed among the remaining channels. External flow meters Flow-5 ...
Process temperature: 0 °C - 113 °C
Process pressure: 0 bar - 34.47 bar
... Differential Pressure Meters are kits designed to measure differential pressures on flow measurement valves and flow measurement orifices at an accuracy of +/- 5%. It consists of a dial ...
Volumetric flow rate: 0 l/min - 350 l/min
Process temperature: -40 °C - 140 °C
Process pressure: 0 bar - 16 bar
Magnetic Inductive Flowmeter (Flow Meter) - All Metal - Stainless Steel - MIM Measuring range: 0.03 - 3 l/min ... 1.5 - 350 l/min liquids Accuracy: ±(0.8% of reading ...
KOBOLD INSTRUMENTATION
Volumetric flow rate: 3 l/h - 50,000 l/h
Process temperature: 0 °C - 100 °C
Process pressure: 10 bar
... media, water, alkalines, acids Direct visualisation of the measured values Accuracy class 4 Integrated mounting rail for flow data sensors
Process temperature: -20 °C - 150 °C
Process pressure: 16 bar
Electromagnetic flowmeter for measuring energy in industrial and commercial buildings Products Application Building technology Flowmeters Local / district heating Products Medium ...
INTEGRA Metering AG
Volumetric flow rate: 0 m³/h - 140 m³/h
Process pressure: 16 bar
... rotating coupling • For horizontal or vertical installation • Robust water flow meter • Accurate meter measurements • Nominal diameter: DN 80 • Measuring ...
INTEGRA Metering AG
Process temperature: 0 °C - 50 °C
Process pressure: 16 bar
... hydrants • Robust stainless steel housing (corrosion resistant) • Integrated flow straightener (bidirectional measuring principle) • Robust water flow meter • ...
INTEGRA Metering AG
Volumetric flow rate: 1 m³/h - 9,048 m³/h
Process temperature: -40 °C - 85 °C
Precision: 0.5 %
... LEKTRA presents a new type of electromagnetic flowmeter with plastic sensors: RKmag. Because of its particular inner shape the mounting of the unit requires no straight pipe lengths before and after the meter. ...
SGM LEKTRA
Process temperature: -40 °C - 100 °C
Precision: 0.5, 0.2 %
Repeatibility: 0.1 %
Flow measurement for conductive and chemically aggressive liquids Neoprene / PTFE coatings Power supply 85÷265Vac; 12Vdc; 20÷30Vdc/Vac Datalogger on USB pendrive Remote control via Smartphone Description RPmag ...
SGM LEKTRA
Volumetric flow rate: 0.1 m³/h - 18,000 m³/h
Process temperature: -40 °C - 100 °C
Precision: 0.5 %
Flow measurement for conductive liquids Measurement range DN10 ÷ 800 GPRS data transmission Battery powered, 6 years autonomy; 12÷24Vdc Analog, impulsive and MODBUS RTU outputs Parameter ...
SGM LEKTRA
Volumetric flow rate: 0.8 l/min - 33,880 l/min
Process temperature: -29 °C - 71 °C
Process pressure: 10, 7 bar
The Tucor Ultrasonic Flow Meter Assembly (“UFM-A”) is a flow meter for the modern age of irrigation, with a design optimized for retrofit. Capable of measuring ultra-low ...
Volumetric flow rate: 0.8 l/min - 2,032.8 l/min
Precision: 2 %
... advanced flow management products is built around the water-saving accuracy and leak detection capabilities of the ultrasonic flow meter. Match the features of your existing controller ...
Process temperature: 0 °C - 60 °C
... 203 liquid flow meter is optimized for customers still looking for high performance, but needing a lower-cost, less feature-rich option for dedicated clamp-on ultrasonic metering. The ...
Sierra Instruments
Process temperature: -40 °C - 200 °C
Process pressure: 103 bar
... Product Benefits Mass & Volumetric flow monitoring of most gases, liquids and steam Measures five process variables with one process connection: Mass flow rate Volumetric flow ...
Sierra Instruments
Process temperature: -40 °C - 200 °C
Process pressure: 103 bar
... Mass or volumetric flow monitoring of gases, liquids or steam Ideal for pipes and ducts up to 72 inches (2M). Measures five process variables with one process connection Mass flow ...
Sierra Instruments
... which can be freely installed and removed from the mainboard in seconds. Build your own flowmeter We offer you the possibility to customize to get the flowmeter according to your needs and your application. Plug ...
Arkon Flow Systems
Process temperature: -20 °C - 60 °C
The MAGB1 is a battery-powered electromagnetic flowmeter that is certified according to the Measuring Instruments Directive (MID) and the International Organization of Legal Metrology (OIML). MAGB1 can be equipped by ...
Arkon Flow Systems
... stand-alone version flowmeter, which does not need a transmitter and can be operated on its own. If you need a low-cost flowmeter without a read-out on a display and outputs, this will be the right one. Contact our ...
Arkon Flow Systems
Volumetric flow rate: 5 m³/h - 2,400 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 0 bar - 200 bar
... is very suitable for opaque, corrosive or dangerous fluids used in most industrial processes. Its robust design enables the flow of viscous fluids or gases to be measured under particularly severe operating conditions. Indication ...
Volumetric flow rate: 0.1 m³/h - 250 m³/h
Process temperature: 60, 200, 150, 90 °C
Process pressure: 1.5 bar - 34.5 bar
A plumb bob float is pushed by the fluid and moves vertically in a conical borosilicate glass tube. The cross section is therefore variable and increases gradually. For a given flow rate, the float ...
Volumetric flow rate: 0.2 m³/h - 200 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 6 bar - 16 bar
A float, of the plumb bob type, is pushed by the fluid and moves vertically in a borosilicate glass tube which widens upwards. For a given flow rate, the float is established at a particular level where ...
Process temperature: 0 °C - 250 °C
Precision: 2 %
The DOPPLER flowmeters are designed to measure the volumetric flow in closed and full pipes. It consists of two sensors an emitter and an ultrasonic receiver. The emitted waves are transmitted by the ...
Sensotec Instruments
Process temperature: -10 °C - 80 °C
Precision: 1 %
Repeatibility: 0.2 %
Non-intrusive flowmeter for transit time for measurement of clean liquids. Electroinica mural with power to 220 Vac or 10/30 Vdc. Available with three types of sensors A (for pipes of 20 to 100 m), B ...
Sensotec Instruments
Process temperature: 50 °C
... Display: 3.5 inch; Display mode: Numerical mode, graphic bars, Graphic charts or needle dials; Standard measures: Fluid velocity, water level and Flow; Serial communication: Standard ...
Sensotec Instruments
Volumetric flow rate: 260 us gal/min - 52,000 us gal/min
Process pressure: 0 bar - 27.58 bar
... insertion flow meter that is intended to be retrofitted into an automatic control valve. It provides an accurate flow measurement data without installing a separate meter. ...
Process temperature: -40 °C - 70 °C
MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water ...
PIETRO FIORENTINI
Process temperature: 150 °C
MULTIPHASE FLOW METERING Flowatch HS The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water ...
PIETRO FIORENTINI
Process temperature: 150 °C
... oil, water and gas flow rates in Wetgas flow regimes (Lockhart-Martinelli < 0.3) without any separation or moving parts. It implements the latest state of the art technologies such as ...
PIETRO FIORENTINI
Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar
... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning ...
Process temperature: 120 °C
... signal is transmitted, once in the direction of flow and once against the direction of flow. The signal is accelerated in the direction of the volume flow and delayed against the direction ...
Volumetric flow rate: 0.1, 0.2, 1 l/s
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar
The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section ...
MIB GmbH Messtechnik & Industrieberatung
Volumetric flow rate: 0 l/min - 60 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar
Flowmax 42i is a flow meter calculating the volume flow of liquids. Based on the ultrasonic technology Flowmax 42i is able to measure conductive and non-conductive liquids ...
MIB GmbH Messtechnik & Industrieberatung
Volumetric flow rate: 0.3 l/min - 240 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 10, 16, 15, 20, 25 bar
Flowmax 44i is a flow meter calculating the volume flow of liquids. MIB GmbH - Ultrasonic Flowmeter Flowmax 44iBased on the ultrasonic technology Flowmax ...
MIB GmbH Messtechnik & Industrieberatung
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 450 bar
Suco VSE France
Process pressure: 2 MPa
... activity, classified as exempted category by IAEA, combined with the venturi flow measurement technology to measure individual phase flow rate in a three-phase flow. Oil, gas and water ...
Haimo Technologies Group Corp.
Volumetric flow rate: 6.3 l/min - 30 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 0.2 bar - 10 bar
The combination of a flow meter and a solenoid valve in one compact unit enables, with suitable electronics, the accurate metering of a liquid together with the ability to interrupt the ...
Process temperature: 0 °C - 50 °C
Clean liquids that pass ultrasound and do not contain air bubbles (such as pure water and chemical solution). Input: - BNC connector, coaxial cable from sensor. Range: - 0 to ±32.8 fps (0 to ±10 ...
Process pressure: 1 bar - 25 bar
Precision: 0.5 %
Electromagnetism Flow Meter Category:Equipment Browse:297 Times Product Profile Specification: Data Material: Detection electrodes 316L/HC/Ti/Ta, lining PTFE Accuracy: 0.5%
Process temperature: -10 °C - 120 °C
Process pressure: 0.6 MPa - 4 MPa
Precision: 0.5 %
... applications are monitoring of liquids, filling, dosing and precise measurement in custody transfer Measuring principle Mag meter works based on Faraday's law, when the liquid goes ...
Supmea Automation
Volumetric flow rate: 0.4 l/min - 400 l/min
Process temperature: -40 °C - 150 °C
Process pressure: 315 bar
The SRZ ST helical flow meter series (ST for standard version) are flow-measuring devices that are used mainly in highly viscous, abrasive, filled as well as lubrication and non-lubrication ...
KEM Küppers Elektromechanik GmbH
Volumetric flow rate: 0.1 l/min - 2.8 l/min
Process pressure: 30, 500, 700, 550 bar
Precision: 0.5 %
... HIGH PRECISION The K200 digital flow meter has been designed to ensure precise measurement of the quantity dispensed. Equipped with acetal resin oval gears, the K200 oil flow meter ...
PIUSI
Volumetric flow rate: 0.1 l/min - 15 l/min
Process temperature: -25 °C - 125 °C
Process pressure: 10 bar
... transistor outputs are available on each flow meter. NSF Certified for Use in Food and Beverage Production Turbine Flow Measurement Low cost PVDF or PP body 1- 2% FSD Sapphire bearings Hall ...
Titan Enterprises
Please specify:
Help us improve:
remaining