- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Piping >
- Masterflex
Masterflex piping
Inner diameter: 6 mm - 25 mm
Outer diameter: 13.1 mm - 36.1 mm
Pressure: 450, 400, 360, 320, 225 bar
... development and improvement has resulted in the creation of some of the most robust, high-performance hoses on the market. INFINITY, the new OEM focused hose family from Manuli Hydraulics, has been specifically ...
MANULI HYDRAULICS
Inner diameter: 4 mm - 19 mm
Outer diameter: 6 mm - 24 mm
Pressure: 16, 12, 10 bar
Extensive hose range with high flexibility and durability The CEJN hose range for compressed air consists of PUR Stream-line hoses and EPDM hoses. The PUR hoses offer ...
CEJN
Inner diameter: 2 mm - 18 mm
Outer diameter: 4 mm - 22 mm
Pressure: 0 bar - 141 bar
Pneumatic tubes supplied in several materials: – NEW – ECO-PA – Polyamide PA10.12 – Polyurethane PU – Polyethylene PE – PTFE
Inner diameter: 4 mm - 36 mm
Outer diameter: 6 mm - 42 mm
Pressure: 185 bar - 426 bar
Prices per metre. We recommend the use of Reinforcing Rings SR-595 for dimensions marked **. The stated operating pressure PB (in bar) is calculated to DIN2413, see technical information and the pressure reduction table.
Schwer Fittings
Inner diameter: 19 mm - 50.8 mm
Outer diameter: 32.2 mm - 681 mm
Pressure: 250 bar - 430 bar
High Pressure use for petroleum based hydraulic fluids, especially suitable for a long cycle-lifetime, very good flexibilty. Temperature: -40 ° C to +100 ° C; Outer cover: made of synthetic rubber, highly resistant to abrasion, oil, ozone, ...
Schwer Fittings
Inner diameter: 0.05 mm - 9.7 mm
The stated operating pressure PB (in bar) is calculated to DIN2413, see technical information and the pressure reduction table.
Schwer Fittings
Inner diameter: 2 mm - 12 mm
Outer diameter: 4 mm - 14 mm
Inner diameter: 13 mm - 45 mm
Outer diameter: 20.2 mm - 60 mm
Pressure: 20 bar
... and FDA (21 CFR 177.2600) Meets the requirements of fire and smoke gas toxicity according to DIN 5510-2 Potable Water Hose Deutsche Bahn AG Approval
Continental Industry Contitech
Pressure: 4,100 bar
Temperature: -40 °C - 70 °C
Polyamide tubes type T-PA12 are for technical applications due to theirs characteristics of flexibility and mechanical performances. These tubes show high mechanical properties to traction and to continuous & alternate flexion, notable ...
Refuelling hoses for petroleum based products and chemicals are quality hoses by ELAFLEX / ContiTech, setting the standards. Available as reel, cut lengths or assemblies e.g. TW hose ...
Elaflex Hiby GmbH & Co. KG
... airfield all hose type can be optional ordered with NEON bands for improved visibility. Distribution usually by authorized distributors, agents and subsidiaries. OEMs are supplied directly by ELAFLEX. 'YELLOW BAND' ...
Elaflex Hiby GmbH & Co. KG
... 95955 and EN 1765, type L. *) With a sufficient permanent pressure the hose does notkink even with low bending radii. The reinforcement is constructed in such a way that the hose keeps its whole diameter ...
Elaflex Hiby GmbH & Co. KG
Temperature: -20 °C - 100 °C
The successful use of hose pumps in a number of situations led Verder to develop a hose with an enhanced construction. Hoses in peristaltic pumps generally fail due to fatigue of the ...
Temperature: -20 °C - 85 °C
... and varied applications of its tube pumps. However, not all tubes are suitable for use in a peristaltic pump. The following criteria are important when selecting a tube: Chemical resistance Food grade quality ...
Inner diameter: 6 mm - 160 mm
... Our Carburetor Pre-Heater Hose - The Ultimate Replacement Solution Direct Replacement for Peak Performance Are you experiencing issues with your vehicle's HVAC control duct hose? Look no further! Our Carburetor Pre-Heater ...
Inner diameter: 6 mm - 150 mm
Outer diameter: 10 mm - 156 mm
... corrugated tube is manufactured from a combination of aluminum foil and Kraft, with aluminum on the outside and inner layers and Kraft in the middle layer. This unit has a temperature range of -30 to +120°C, and is the ...
Inner diameter: 6 mm - 150 mm
... Protection Tube with Glass Wool also named HAVC control duct hose, can be used to control cables, gear cables, cooling tubes, air conditioning and ventilation pipes, fuel hoses, wire sets and heat sensitive parts for ...
Inner diameter: 19, 25, 12.5, 15 mm
Pressure: 9, 8 bar
Temperature: -15 °C - 60 °C
... for our expertise and quality products, eco-design is synonymous with high performance at Tricoflex. Our new eco-friendly hoses have been tested to meet strict quality standards and keep the brand’s premium specifications. ...
TRICOFLEX
Inner diameter: 2 mm - 60 mm
Outer diameter: 4 mm - 70 mm
Temperature: -15 °C - 60 °C
Single layer multipurpose food quality tube in flexible, transparent, class A PVC. Applications Carrying various non-pressurised liquids: water, certain acids and bases, foodstuff liquids such as milk, fruit juices, ...
TRICOFLEX
Inner diameter: 2 mm - 10 mm
Outer diameter: 4 mm - 12 mm
Pressure: 6 bar - 20 bar
THIN-WALLED CALIBRATED TUBES MADE OF POLYTETRAFLUOROETHYLENE. APPLICATIONS For the transfer of chemical products For the passage of fluids in high-temperature conditions. SECTORS OF ACTIVITY Industry Laboratories ADVANTAGES PTFE ...
TRICOFLEX
Inner diameter: 6.4 mm
Delivered length: 6 in - 36 in
Stainless steel tubes can be found in all industries and invarious applications. Pushna International provides tubesfor the standard sensors and can also supply in a widerange of wall thicknesses and diameters to suit almost any application. ...
Self-extinguishing PVC pipe and fittings available on request. Even though, we recommend using Metal for any industrial central vacuum cleaner, in some light applications PVC piping can be used.
Starvac
Inner diameter: 50 mm - 200 mm
Delivered length: 3 m - 6 m
The steel piping system with fittings consists of many different diameters. With its special aerodynamic design for industrial central vacuum systems, it ensures minimum pressure drop through the whole system. All ...
Starvac
High quality Stainless Steel pipes and fittings available on request. Premium polished finish. Perfectly clean inside and outside. Extra-large bend radius. Available material: SS304 SS316L
Starvac
Inner diameter: 102, 76, 200, 152, 127 mm
Temperature: 0 °C - 170 °C
Delivered length: 5 m - 15 m
... shortly up to 200°C) available in various dimensions. The Exhaust hose is a super-lightweight and very flexible hose made of TPE foil with outside embedded nylon spiral. The hose ...
Geovent
Inner diameter: 152, 127, 102, 203, 160 mm
Temperature: -60 °C - 450 °C
Delivered length: 1 m - 10 m
GeoFlex Exhaust HT-450 is a high temperature hose for extraction or blowing of hot air, vapors, exhaust gases or dust up to 450°C (shortly 500°C). Dimensions from ø102 to ø203 mm and lengths up to 10 meter. It is suitable ...
Geovent
Inner diameter: 40 mm - 500 mm
Temperature: -40 °C - 90 °C
Delivered length: 5, 10, 15 m
GeoFlex PUR is an antistatic suitable for dust, chips, granule, powder etc. The hose is clear and very durable. The resistance to oil and petrol fumes is excellent. Integrated steel wire and is suitable for ATEX installations. ...
Geovent
Outer diameter: 15 mm - 2,032 mm
Does your project require special additional processing? Our high quality pipe is also the base product for manufacturing high-quality special pipes and components ready for installation. Our combination of modern production ...
H. BUTTING GmbH & Co. KG
Outer diameter: 114.3 mm - 660 mm
Delivered length: 24, 12 m
... developed the mechanically lined BUTTING-Bimetal-pipe, short: BuBi® pipe. The BuBi® pipe is a corrosion resistant pipe which is telescopically aligned inside a pipe in carbon-manganese ...
H. BUTTING GmbH & Co. KG
Outer diameter: 33.7 mm - 812.8 mm
BUTTING stores ordinary 5 000 t pipes including pipes with the following quality criteria: In 1.4462 / UNS S31803 / UNS S32205 acc. to ASTM A790 / A928 In 1.4541 / 1.4571 / 1.4307 / 1.4404 acc. to DIN EN 10217-7 In 1.4410 / UNS S32750 ...
H. BUTTING GmbH & Co. KG
Inner diameter: 25 mm - 152 mm
Pressure: 3 bar - 8 bar
Temperature: -10 °C - 60 °C
Multicapa hose of PVC plasticized, specially formulated for resistance to aliphatic hydrocarbons, especially butane and propane to low pressures. It complies with the permeability, flexibility and flammability that ensures ...
ESPIROFLEX SA
Inner diameter: 25 mm - 152 mm
Pressure: 0.88 bar
Delivered length: 50, 30, 20 m
PVC hose free of phthalates, to transfer and transport wine and all types of alcoholic food fluids at 50 °, as well as dairy products and their derivatives. Made under European legislation of raw materials for non -fatty ...
ESPIROFLEX SA
Inner diameter: 45 mm - 203 mm
Outer diameter: 55 mm - 227 mm
Pressure: 7, 5, 4.5, 4, 3.5 bar
PVC hose free of phthalates, to transfer and transport wine and all types of alcoholic food fluids at 50 °, as well as dairy products and their derivatives. Manufactured under European legislation of raw materials for ...
ESPIROFLEX SA
Inner diameter: 3.5 in - 16 in
Outer diameter: 4 in - 19 in
Pressure: 230, 245, 215, 320 psi
Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt ...
Tipsa
Inner diameter: 30 mm - 254 mm
Outer diameter: 33.8 mm - 261.6 mm
Pressure: 10 bar - 28 bar
... hours, after which the properties of the rubber are at least 60% of the original values. Abrasion Resistance: The OROFLEX 10 hose will extend the lifetime of your application when under extreme conditions, where abrasion ...
Tipsa
Inner diameter: 20 mm - 305 mm
Outer diameter: 24 mm - 313.2 mm
Pressure: 11 bar - 38 bar
... hours, after which the properties of the rubber are at least 60% of the original values. Abrasion Resistance: The OROFLEX 20 hose will extend the lifetime of your application when under extreme conditions, where abrasion ...
Tipsa
Inner diameter: 0.13 mm - 450 mm
Outer diameter: 1.6 mm - 580 mm
Temperature: -30 °C - 310 °C
Food Grade PEEK are high-performance polymers for use in food, beverage, and water processing equipments. Compliant with major food contact regulations and standards, it's suited for demanding environments supporting multiple requirements ...
Taizhou Ark International Trade Co.,Ltd
Inner diameter: 8 mm - 600 mm
Outer diameter: 10 mm - 660 mm
Temperature: -30 °C - 260 °C
Elevate your industrial setup with our heavy wall PEEK tube measuring OD360mm x ID250mm. Engineered to withstand the rigors of tough working conditions, this tubing showcases exceptional resistance to wear and corrosion ...
Taizhou Ark International Trade Co.,Ltd
Inner diameter: 0.13 mm - 16.5 mm
Outer diameter: 1 mm - 20.5 mm
Temperature: -50 °C - 250 °C
PEEK is an inert fluoropolymer, with high chemical compatibility and a working temperature range of -50 °C up to +250 °C. This PEEK capillary tubing can be used in a microfluidic system for demanding applications with high pressure or ...
Taizhou Ark International Trade Co.,Ltd
Inner diameter: 6.7 mm - 25.4 mm
Outer diameter: 9.6 mm - 32.2 mm
Pressure: 50 bar - 88 bar
... 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
... vehicles where abrasive protection is required. This hose is sold by the metre. Fluid applications - Oil, Coolant & Water Compatible fittings 236, 336, 2776 & 936 hose finishers.
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 7.9, 9.5, 6.3 mm
Outer diameter: 15.5, 11.7, 13.2 mm
Pressure: 63 bar
The 202 hose is a rubber lined, single braid hose, compatible with 936 hose finishers. This hose is sold by the metre. Compatible fitting 936 hose finishers.
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 15 mm - 400 mm
Pressure: 16 bar
RFF Flange Hoses have been specifically engineered for use as inlet and outlet connections to rotary joints. Hose prevents pipe strains from creating tension or stress on the rotary joint. Connecting ...
Inner diameter: 1 mm - 11 mm
Outer diameter: 1.8 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Very flexible and kink resistant. Suitable for applications where maneuverability is required. Achieves a small bend radius and flexibility. Wide range of color options. 10 colors are provided as standard for identification, tracing, ...
NIHON PISCO CO., Ltd.
Inner diameter: 4, 2.5, 6.5, 5, 8 mm
Outer diameter: 8, 6, 12, 10, 4 mm
Pressure: 0 MPa - 0.6 MPa
Extremely flexible suitable where a small bending radius is needed. The excellent flexibility enables piping in a narrow space achives a small bend radius. Can also be used with water. Extruded from Ether type polyurethane. The ...
NIHON PISCO CO., Ltd.
Inner diameter: 2 mm - 8 mm
Outer diameter: 3 mm - 12 mm
Pressure: 0 MPa - 1 MPa
Competitive pricing, dedicated to air use. Ester based polyurethane tubing brings mechanical strength and oil resistance. The standard colors are black and clear blue. The cut marks at 500mm interval are printed on the tube. They ...
NIHON PISCO CO., Ltd.
Inner diameter: 18 mm - 242 mm
Outer diameter: 20 mm - 250 mm
Pressure: 16 bar
EQOfluids FR
Inner diameter: 20 mm - 63 mm
Pressure: 70 bar
Temperature: -20 °C - 100 °C
EQOfluids FR
Inner diameter: 20 mm - 160 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C
EQOfluids FR
Inner diameter: 30 mm - 102 mm
Temperature: -40 °C - 80 °C
Delivered length: 30 m
Color: transparent with dark grey spiral Features: Transparent, ester-based TPU spiral hose, reinforced with dark grey, anti-shock rigid PVC spiral. Wall thickness from 1,2 mm to 2,0 mm. The perfectly smooth inner surface guarantees ...
IPL SPA
Inner diameter: 206, 257, 360 mm
Temperature: -40 °C - 90 °C
Delivered length: 10 m
Translucent antimicrobial ester-based TPU hose reinforced with TPU-coated grey colored steel spiral. Constant wall thickness 1,75 mm. Resistant to hydrolysis and microbes, UV rays and weathering. Specially designed for ...
IPL SPA
Inner diameter: 360 mm
Temperature: -40 °C - 90 °C
Delivered length: 10 m
... <102 Ohm/m) by earthing the spiral. Application: Suitable for street sweepers of all types and sizes that subject the hose to significant stress during use. Suction of leaves, soil and wet residues.
IPL SPA
Inner diameter: 2.5 mm - 9 mm
Outer diameter: 4 mm - 12 mm
Pressure: 0 bar - 22 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 2 mm - 16 mm
Outer diameter: 4 mm - 20 mm
Pressure: 0 bar - 44 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 2.5 mm - 10 mm
Outer diameter: 4 mm - 14 mm
Pressure: 0 bar - 15 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 4 mm - 18 mm
Outer diameter: 6 mm - 26 mm
Delivered length: 250 mm - 1,800 mm
Temperature Technology Ltd.'s (TTL) line of ceramic tubing systems is available in a wide array of diameters and lengths, commonly used for applications that involve extensive temperature levels. These systems may feature either aluminous ...
Temperature Technology Ltd
Inner diameter: 1.3 mm - 6 mm
Outer diameter: 1.6 in - 8 in
Delivered length: 24 mm - 500 mm
Temperature Technology Ltd
Inner diameter: 6 mm
Outer diameter: 0.313 in
Delivered length: 123 mm
Temperature Technology Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining