- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Structure hose >
- Masterflex
Masterflex structure hoses
Inner diameter: 40 mm - 500 mm
Temperature: -40 °C - 90 °C
Delivered length: 5, 10 m
... Semi-heavy or T-bolt hose clamps. Before assembly, make sure that the connector is not damaging to the inner tube (particularly in the case of poorly deburred and sharp fittings). CHEMICAL RESISTANCE See ...
TRICOFLEX
Inner diameter: 2 mm - 10 mm
Outer diameter: 4 mm - 12 mm
Pressure: 6 bar - 20 bar
THIN-WALLED CALIBRATED TUBES MADE OF POLYTETRAFLUOROETHYLENE. APPLICATIONS For the transfer of chemical products For the passage of fluids in high-temperature conditions. SECTORS OF ACTIVITY Industry Laboratories ADVANTAGES PTFE ...
TRICOFLEX
Inner diameter: 6.5, 8, 9.5 mm
Outer diameter: 10.5, 12, 14 mm
Pressure: 20 bar
Antistatic hose specially designed for compressed air supplies. Design using 4 layers of extra-flexible TPU with a high tenacity polyester fibre reinforcement. Applications Hose specially designed ...
TRICOFLEX
Inner diameter: 25 mm - 55 mm
Outer diameter: 32.1 mm - 63.3 mm
Pressure: 15 bar - 24 bar
PVC hose with square section rigid PVC spiral, HAYCLOR underlayer, for suction and delivery of liquids for swimming pool supply and recirculation systems. CHLORINE RESISTANCE MOULD RESISTANCE
MERLETT
Inner diameter: 6 mm - 200 mm
Pressure: 20 bar
Temperature: -20 °C - 220 °C
The metal hoses produced by DEWEL are designed for the inlet and outlet connections of rotary joints. It can avoid the tension and pressure generated by the hard pipe on the joint, thus ensuring the joint ...
Inner diameter: 6 mm - 160 mm
... Our Carburetor Pre-Heater Hose - The Ultimate Replacement Solution Direct Replacement for Peak Performance Are you experiencing issues with your vehicle's HVAC control duct hose? Look no further! ...
Inner diameter: 45 mm - 203 mm
Outer diameter: 55 mm - 227 mm
Pressure: 7, 5, 4.5, 4, 3.5 bar
PVC hose free of phthalates, to transfer and transport wine and all types of alcoholic food fluids at 50 °, as well as dairy products and their derivatives. Manufactured under European legislation of raw materials for ...
ESPIROFLEX SA
Inner diameter: 25 mm - 110 mm
Pressure: 7, 5, 15, 12 bar
Temperature: -25 °C - 70 °C
Hose without phthalates for air transfer, plastic grains, alcoholic fluids at 50 °, liquid foods and for vacuum pumps. Reinforced with falled steel spiral, which gives it vacuum resistance. Applications Transgen ...
ESPIROFLEX SA
Inner diameter: 15 mm - 305 mm
Pressure: 0.49, 0.39 bar
Flexible PVC hose specially designed for the aspiration of oily fumes, reinforced with rigid antichhocate PVC spiral, designed for aspiration, gas supply and industrial ventilation. Applications Aspiration ...
ESPIROFLEX SA
Inner diameter: 3.5 in - 16 in
Outer diameter: 4 in - 19 in
Pressure: 230, 245, 215, 320 psi
Designed for water pipe network rehabilitation. This thermoplastic polyurethane (TPU) coated hose is manufactured in diameters ranging from 4” (DN125) to 20” (DN500). Its ease of expansion helps to adapt ...
Tipsa
Inner diameter: 25 mm - 75 mm
Outer diameter: 29.2 mm - 79.8 mm
Pressure: 14, 18, 21, 40 bar
... construction without the use of glues or adhesives. The BLINDEX hose is produced with a revolutionary process developed with the experience of two decades of research and production of rubber covered fire hoses. ...
Tipsa
Inner diameter: 30 mm - 254 mm
Outer diameter: 33.8 mm - 261.6 mm
Pressure: 10 bar - 28 bar
... hours, after which the properties of the rubber are at least 60% of the original values. Abrasion Resistance: The OROFLEX 10 hose will extend the lifetime of your application when under extreme conditions, where abrasion ...
Tipsa
Inner diameter: 2.5 mm - 10 mm
Outer diameter: 4 mm - 14 mm
Pressure: 0 bar - 15 bar
ALPHA AUTOMATISMES Sarl
Inner diameter: 2.5, 4, 5.5, 7, 8 mm
Outer diameter: 4, 6, 8, 10, 12 mm
Temperature: -40 °C - 60 °C
ALPHA AUTOMATISMES Sarl
Inner diameter: 4.8 mm - 25.4 mm
Outer diameter: 8.8 mm - 30.8 mm
Temperature: -70 °C - 260 °C
ALPHA AUTOMATISMES Sarl
Inner diameter: 18.2 mm - 100 mm
Outer diameter: 34.9 mm - 120.7 mm
Pressure: 0.4 MPa - 2.1 MPa
This section covers hose for use in low pressure and vacuum applications with petroleum base hydraulic fluids within a temperature range of -40°C~+100*c (-40°F212 F) . This hose shall consist of an ...
Guangzhou YuBen Hydraulic Technology Co., Ltd.
Inner diameter: 12 mm - 26 mm
Outer diameter: 16 mm - 32 mm
PE-X/Al/PE-X pre-insulated pipe for air-conditioning, domestic water and heating use supplied in rolls - Green colour Unidelta produces a range of insulated pipes ideal for the construction of air conditioning systems ...
Unidelta S.p.A.
Inner diameter: 2 mm - 9 mm
Outer diameter: 4 mm - 12 mm
Pressure: 19 bar - 44 bar
FEATURES Polyamide 12 coated in polyurethane fireproof to UL94 V0. The external sheath offers greater protection from sparks and welding slag and can easily be removed for use with push-in fittings using the appropriate tool. PA12 hardness ...
MEBRA PLASTIK ITALIA SPA
Inner diameter: 0.063 in - 0.32 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 140 psi - 256 psi
... Yellow, Red, Green, Black, Blue. FLEXIBLE TUBINGS Working temperature: -10°C to +80°C. Hose Hardness: 85 Shore D Rolls: 100 mt. Colours available: Neutral, Yellow, Green, Red, Black, Blue FLEXIBLE ...
The Geovent channel duct type 35 in aluminum is a highly flexible system for the extraction of exhaust fumes. It is designed for large workshops or assembly lines with a linear work flow. The channel duct is also used ...
Inner diameter: 83 mm - 305 mm
Temperature: -60 °C - 260 °C
Delivered length: 1 m - 10 m
This hose is suitable for extraction of hot vapors, fumes or dust in the industry up to 260°C (Shortly 300°C). Made of silicone coated Kevlar in dimensions ø83 to ø305 mm and in lengths up to 10 m. GeoFlex Kevlar HT-300 ...
Temperature: -30 °C - 100 °C
Product details Materials: Nylon PA6, PP; PA6 -V0, PP ( Polypropylene)-V0 Working temperature: -30℃ to 100℃, short time can up to 110℃. Style: Closed and opened Property: Good flexibility, twist resistance and good bending ...
Inner diameter: 3 mm - 25 mm
Outer diameter: 8.5 mm - 33.3 mm
Pressure: 6.9 MPa - 34.5 MPa
Thermoplastic Elastomer Hose Application: Automobile, Engineering machinery, Lathe, Agriculture machine, Mining, Spurting the oil paint, Avigation & spacefight, Cooling and other hydraulic control system. Tube: Oil-resistant ...
Inner diameter: 5 mm - 102 mm
Outer diameter: 10.9 mm - 120.7 mm
Pressure: 0.25 MPa - 10.5 MPa
Low Pressure Hose Application: Low pressure hydraulic lines. suitable for petroleum based hydraulic fluids, air and water. Tube: Oil resistant synthetic rubber. Reinforcement: Two high resistance textile braids. Cover: ...
Rubber Hoses Thejo offers, acid-alkali and non abrasive special fabric and wire reinforced rubber hoses suitable for Pressurised or Vacuum services. The features of Thejo's Hoses: ...
Inner diameter: 6.3 mm - 103 mm
Outer diameter: 11.1 mm - 128 mm
Pressure: 14 bar - 150 bar
... medium-walled single wall normal corrugation Hose material Stainless steel 1.4404 Braiding 1 braided layer in 1.4301 Standard DIN EN ISO 10380 Temp. applies only to the hose ...
HANSA FLEX AG
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 12.7 mm - 32.5 mm
Pressure: 21, 13, 28, 24 bar
Application area Low pressure circuits (no pressure surge loads or critical applications) Return hoses Pneumatic controllers Inner layer oil resistant synthetic rubber Insert one ...
HANSA FLEX AG
Inner diameter: 6 mm - 19 mm
Outer diameter: 12 mm - 27 mm
Pressure: 12 bar - 23 bar
... environmentally and free of heavy metals abrasion and aging resistant sterilisable permanently transparent very flexible Inner layer Soft PVC Insert one braided textile insert Outer ...
HANSA FLEX AG
Temperature: -270 °C - 600 °C
Corrugated hoses are manufactured from various materials with a corrugated profile. -standard dimensions from DN 6 to DN 300 -for temperatures from -270 °C to max. 600 °C -pressure resistant and leakproof -with ...
Two stainless steel coaxial flexible metal hoses ensure flexibility. The internal unit is responsible for the pressure resistance and main transportation of the fuel. It connects the rigid transfer pipe ...
Inner diameter: 6 mm - 150 mm
Outer diameter: 9.8 mm - 184.4 mm
Pressure: 0.7 bar - 172 bar
Anaconda butt welded corrugated stainless steel hose type BW656 is designed for conveying chemicals, gases, steam, etc. It is suitable for use under full vacuum and has a temperature range of cryogenic to ca. +600°C*. ...
Anamet Europe
Temperature: 0 °C - 600 °C
Anaconda butt welded corrugated stainless steel hose type BW856 is designed for conveying chemicals, gases, steam, etc. It is suitable for use under full vacuum and as a temperature range of cryogenic to ca. +600°C*. ...
Anamet Europe
Inner diameter: 12.2 mm - 25.4 mm
Outer diameter: 16.7 mm - 32.3 mm
Pressure: 6 Pa - 12 Pa
The Anaflex click system consists of a highy quality flexible stainless steel AISI-316L hose with a nickel plated brass Anaflex Click fitting. The IP 69 system retains it’s liquid-tight rating up to +250° ...
Anamet Europe
Outer diameter: 32 mm - 500 mm
... the material Fusiolen PP-R/PP-RCT. These are insulated with PUR foam and enclosed with a casing pipe made of HDPE. The pre-insulated aquatherm energy pipe is particularly suitable for energy-efficient ...
Outer diameter: 0.75 in
Pressure: 20 bar
Temperature: 0 °C - 25 °C
... Pressure PN : 20 bars for flexible hose Ref.1371 et 1373 1 bar for discharge flexible with support Ref. 1372,1374 and 1375 Flexible hose 90° ends ...
Inner diameter: 6 mm - 100 mm
Pressure: 14 bar - 150 bar
Temperature: 20 °C - 600 °C
Material: 1.4404 AISI 316L with stainless steel braiding 1.4301 AISI 304. The PTFE hoses can also be delivered completely assembled with various different end fittings. Temperature 20 ° C, temperature factor 1.00, temperature ...
Delivered length: 1.5 m
Inner diameter: 50 mm - 400 mm
Outer diameter: 58 mm - 409 mm
Pressure: 0.005 bar - 0.24 bar
... machine, CNC machining center (especially for fast moving systems) bellows, compensators PROPERTIES light weight highly flexible + compressible 3:1 abrasion-resistant microbe resistant good resistance to oil, ...
NORRES Schlauchtechnik GmbH
Temperature: -60 °C - 250 °C
... types as straight, 45° and 90° versions 5 different hose types pre-assembled according to customer specification Characteristics, speciality fittings made of stainless steel 1.4571 tube ...
Inner diameter: 6.7 mm - 25.4 mm
Outer diameter: 9.6 mm - 32.2 mm
Pressure: 50 bar - 88 bar
... 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
... vehicles where abrasive protection is required. This hose is sold by the metre. Fluid applications - Oil, Coolant & Water Compatible fittings 236, 336, 2776 & 936 hose finishers.
GOODRIDGE FLUID TRANSFER SYSTEMS
Inner diameter: 2.03 mm
Pressure: 450 bar
Temperature: -70 °C - 260 °C
Goodridge 600 series hose range is a PTFE lined hose, wrapped in a Stainless-Steel braid; designed for brake and clutch applications. (AN-04, AN-06 & AN-08 600 series hoses and fittings ...
GOODRIDGE FLUID TRANSFER SYSTEMS
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining