Metso horizontal mount pumps

Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m

Standard Bushings-Carbon Graphite Optional Bushings-Alpha Silicon Carbide (Tungsten carbide coated shaft reguired) Optional Tungsten carbide coated shaft Standard NEMA 56C motors Magnet Material-Samarium Cobalt Applications Industry-Chemical ...

Flow: 7,000 m³/h - 115,000 m³/h
Head: 8 m

... of this type of pump is that the rotating element sits “high and dry” away from the corrosive effects of the pumped water when pump is not in use. Thus the horizontal design offers longer ...

Flow: 2,000 m³/h - 50,000 m³/h
Head: 3 m - 175 m

... RANGE A wide range of available hydraulics enables customization of pump selections to maximize pumping efficiencies. Pump efficiencies up to 91% save money on operating costs. Pumps ...

Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m

Wet-installed horizontal propeller pump with submersible motor, equipped with direct drive or spur gear, ECB propeller with rigid, fibre-repellent blades, bolt-free connection to the discharge pipe. Explosion-proof ...

Flow: 681 m³/h
Pressure: 3,792,000 Pa
Head: 305 m

Two Stage, Horizontally Split Case Pumps designed for Boiler Feed, Mine dewatering and other applications requiring moderately high heads with a wide range of service conditions. Applications Boiler Feed Mine Dewatering Booster High ...

Flow: 850 m³/h
Pressure: 63 bar
Head: 630 m

... high-pressure pumps from the MP series please have a look at our brochures in the sidebar or contact us directly. Product benefits Horizontal design with a closed impeller and external bearing assemblies ...

Flow: 150 m³/h - 150,000 m³/h
Head: 6'00" ft - 32'00"

Pentair Fairbanks Nijhuis VP & HP Series Propeller Pumps Fairbanks Nijhuis propeller pumps are designed to handle the movement of a high volume of water at a low discharge pressure. They are used ...

Flow: 0.038 l/min
Pressure: 0.2 MPa
Weight: 0.5 kg

... dust-proof rating of IP65. • This pump is not completely water resistant. Protect the pump with a cover when installing it out of doors. 1 – 5V control type The input of 1 – 5V proportionally ...

Flow: 160 l/s
Pressure: 100 bar
Head: 1,000 m

PMXT HIGH PRESSURE MULTISTAGE HORIZONTAL PUMPS Caprari offers the new range of surface horizontal multi-stage pumps PMXT ENDURANCE series completely made of AISI316 ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive ...

Flow: 80 m³/h - 1,200 m³/h
Pressure: 0 bar - 16 bar

... ACG OptiLine pump is used for a number of different fluids: Fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids, polymers, emulsions and any non-aggressive fluid with sufficient lubricating properties. If ...

Pressure: 16 bar

... hydraulics •Minimum service costs through minimised number of components and no setting work •Maximum reliability, as the pump does not require O-rings Specifications •Design - Long life grease or oil bath lubrication •Nominal ...

Flow: 0 m³/h - 504 m³/h
Head: 0 m - 105 m

Horizontal electric motor or engine driven FEATURES • Horizontal DIN 24255 Electric Motor • 41 models • Wide choice of materials • Centreline discharge • Back pull-out rotating element can be ...

Flow: 0 m³/h - 6 m³/h
Head: 0 m - 7.5 m
Power: 0.37 kW

... The weight refers only to the packaging without the pump inside Accessories FLANGE KIT (DIN standard – ANSI on request): – KITFLANGMB080P (PP pump) – KITFLANGMB080F ...

Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi

... TSF can be run at separate RPM from the pump, allowing control over the amount of stuffing pressure Benefits (G4 Pump) Universal joint is out of flow path for unobstructed flow to pump ...

Flow: 0.64 l/min - 3.7 l/min
Pressure: 0 psi - 10,000 psi

SPX's compact torque wrench pump SPX PE39 incorporates a new design for reliable operation in rough torque wrench applications. The pump is built in a compact design ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... jackets pump unit may be installed directly in the pipeline, in a hermetic jacket in a vertical or horizontal position may be incorporated with the pump unit by-pass in parallel to ...

Flow: 1,200 m³/h
Pressure: 16, 24 bar
Head: 160 m

Horizontal End Suction Pumps, design in accordance with ISO 2858. ​Materials : Cast Iron, Ductile Iron, Bronze, SS 304, SS 316 Flange : PN16/ PN 25 Applications : Petrochemical ...

Monostage centrifugal pumps with closed impeller according to ISO 2858 and 5199 Max flow m³/h 500 Max pressure bar 15