Mival manual valves

DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar

... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim position indicator drain plug max 150°C 13 BAR. Made in Italy. Fields of application: Industrial plants - Sea water - Fuel - Aggressive fluids ...

DN: 50 mm - 600 mm
Pressure: 6, 5 bar

... PVC-U, PP and PVDF • Actuation by manual lever or reducer steering wheel • Possibility of electrical or pneumatic actuation DA, NA, NC • Electro Positioner 4-20mA or limit switch box position indication • Lever manual ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...

DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C

• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...

DN: 100 mm

Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, ...

DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C

Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...

DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C

Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely abrasive and corrosive fluids. Böhmer ...

Pressure: 10 bar
Temperature: -5 °C - 70 °C

Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...

DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C

Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...

DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C

Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main features • ...

DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -40 °C - 200 °C

Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to-metal joint • Anchored lining with positive locking to body • Dynamic, ...

DN: 63 mm - 110 mm

HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...

DN: 25 mm

Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.

DN: 25 mm
Temperature: 110 °C

Seat valve 25, made of stamped brass. With 110º output and 1 “threads.

DN: 89 mm - 300 mm
Pressure: 300 psi
Temperature: -10 °C - 160 °C

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside & outside the body 5.It could ...

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon ...

DN: 25 mm - 400 mm
Pressure: 10, 16 bar
Temperature: 70 °C

The RAF 01 manual valve is a Normally Closed (N.C) line pressure hydraulically actuated. The 3-W selecting cock valve changes positions: The RAF 01 valve opens when ...

DN: 200 mm - 1,800 mm
Pressure: 16 bar - 31 bar
Temperature: -10 °C - 50 °C

RAPHAEL’s new double eccentric butterfly valve represents the essence of an efficient butterfly valve designed for when economy is a high priority. BTF-E is functional and reliable, providing reduced ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C

special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 10 mm - 25 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 140 °C

Dosing ball valve based on the C 200 Finely adjustable using 180° opening angle Reproducible settings by means of 180° scale disk / scale division 5° Simple automation using electric variable speed actuators

DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C

The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...

DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C

The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...

DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C

The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the reverse side connect to a bracket ...

DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C

... different flow range for each size are available. Easier fine adjustment is possible in each flow range, compared to Pisco conventional standard speed controller. The industry's smallest and low profile. It has ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

... prevents unnecessary manual adjustments during the operations. Use a slot screwdriver to adjust the needle (speed adjustment). Design without an external needle for speed adjustment. Approx. 2/3 height of the ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43

DN: 20, 25 mm

3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16

DN: 20 mm

BY-PASS BRASS Diamant ball valve BY-PASS MMMM BRASS with caps and tangs Full bore PN16

DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...

DN: 0.25, 0.5 in
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C

– Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ Medium - Compressed air

DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...

DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C

Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C

Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...

DN: 150, 200, 250 mm
Pressure: 67 bar

The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. ...

Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...

Pressure: 3 bar - 35 bar

DN: 6.35 mm
Pressure: 0 psi - 150 psi

DN: 4, 8, 6 mm

The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework allows optimum chemical resistance which makes ...