- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- Mival
Mival manual valves
DN: 2 in - 12 in
... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves ...
HABONIM
DN: 2 in - 12 in
Pressure: 420 bar
... guidelines). Up to 15° from the vertical axis for the 6” bonnet (not BS6364 compliant). Flow direction indicators (for valves with preferred flow direction) Highly visible arrows on body and bonnet top. “T” mark ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
High Pressure Cryogenic Class 2500, full differential pressure for sizes up to and including 2″ (DN50), differential pressure of up to 103 bar (1494 psi) for sizes 2½” (DN65) and above with hybrid seats. Pressure containing parts are ...
HABONIM
Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min
... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material of ball: Brass ...
Mader
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
HANSA FLEX AG
DN: 0.375 in
Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)
Holmatro Industrial equipment
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free and ...
KLINGER
DN: 8 mm - 19 mm
Pressure: 0 bar - 40 bar
Brass diaphragm valve For non corrosive gases and gas mixtures up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets Metal-to-metal sealing to atmosphere Tested to use with ...
DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa
Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets ...
DN: 0.5 in - 3 in
Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ...
Watts Water Technologies
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...
DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C
... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...
DN: 0.25 in
Pressure: 5,000 psi
Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits ...
DN: 0.25 in
Pressure: 5,000 psi
High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off of fluids under ...
Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.
DN: 0.125 in - 1.25 in
... Ross E104 is an array of valves that can handle heavy-duty applications. Their frameworks are constructed with heavy cast aluminum offered in 2/2, 3/2, 4/2, or 4/3 configurations with port sizes from G 1/8 up to G 1-1/4. ...
DN: max 80.0 mm
SCHÜTZ CLEANCERT is the new packaging standard for applications where safety and technical cleanliness is crucial. Advantages: CLEANCERT is the highest level of process and product cleanliness and safety offered by SCHÜTZ Extensive ...
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
DN: 25 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 140 °C
... space-free. In addition to passage ball valves and three-way ball valves, also ball valves with rinsing connections and heating jacket are available. ► gap-free sealing of the housing ► ...
DN: 5 mm - 12 mm
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 70 °C
Valves series “CA” are produced in the 3/2, 3/3, 5/2 and 5/3 pneumatic functions. The poppet kind of construction and the very rugged control allow the valve to stand high stress. The push-botton and ...
DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C
... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 25 bar - 40 bar
Temperature: -46 °C - 400 °C
The complete range of valves form AP series are equipped with metallic seats in PENTAFITE that enables to manufacture metal seated ball valves with absolutely ZERO LEAKAGE and easy maintenance. The series ...
Penta Srl
DN: 0.5 in - 3 in
Pressure: 63 bar - 100 bar
Temperature: -46 °C - 400 °C
The AP20P is a valve that belongs to the AP series. It is equipped with metallic seats that permit the engineering of metal seated ball valves. It features ease of maintenance and it does not require ...
Penta Srl
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation ...
Zaklady Automatyki POLNA S.A.
DN: 80, 100, 50, 60 mm
Pressure: 250, 320 bar
... circuit of the pump (by-pass). The valve type Z1B-M thanks to its construction, selection of materials and technology is a valve adapted to use in the most difficult working conditions, at a high pressure ...
Zaklady Automatyki POLNA S.A.
DN: 0.25, 0.125 in
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C
2/2-way toggle lever valve, both sides, Push-in connector hose 4, G 1/8, Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched ...
RIEGLER & Co.KG
Pressure: 6 bar - 10 bar
Temperature: 121, 135 °C
By means of the BioCheck sampling valve, samples can be taken easily and safely out of closed systems like vessels and pipings. When designing this sterile fitting, special emphasis was placed on the aseptic, but also ...
Pressure: 6 bar - 10 bar
Temperature: 135, 150, 121, 130 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
DN: 100 mm
Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C
Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C
Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely abrasive and corrosive fluids. Böhmer ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of ...
Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C
Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug ...
DN: 25 mm
Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 sphere valve. Made of chromed brass. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 ball valve made of chromed brass. Opening by butterfly. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining