Manual valves

... ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most comparable valves ...

DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C

... The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific requirements of the ...

DN: 25 mm - 1,200 mm
Pressure: 10 bar - 100 bar

... control valve but can be used as a manual valve as well. Thanks to its open bore it doesn’t seal anything in, meaning it has an advantage as a manual valve. Smaller ...

... most exigent industrial applications: The Extreme Series, with Ball valves, Butterfly valves and Diaphragm valves in different plastic materials (PVC-U, CPVC, PP-H, PVDF and ABS), manual ...

Pressure: 10 bar
Temperature: 135 °C

... Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve seat in a leakage-free manner and thus enables ...

... VPG BUTTERFLY VALVE This valve is designed for the HVAC market and offers the best value for money! Excellent sealing: shaft protected by a sheath, IP67 manual gearbox. Complies with IP67 rating ...

DN: 0.25 in - 2 in
Pressure: 140, 100 bar
Temperature: -20 °C - 220 °C

... class of 600lbs. It is specialized with a locking device, hand wheel, stem extension and an ISO 5211 mounting pad. For high temperature, PEEK seat is on request. 3 pièces carbon Steel bail valve fully encapsulated ...

DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar

... via an integrated 1/4 turn isolation valve John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves ...

DN: 2 in - 40 in

... - Offered with self relieving seats or optional double piston sealing. Special seat compounds are also available. - Each valve meets API-6D, API 6FA and Nace requirements. - Optional stem extensions, actuators, pipe pups and specialized ...

Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.

DN: 6 in - 48 in
Pressure: 400 psi
Temperature: -30 °C - 200 °C

... Reduced Bore, Lever Handle, Floating Ball Design to EN488 Pressure to EN12266.1 ...

DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 150 °C

... The RPV sanitary vent valves are completely autoclavable, they allow for manual venting of gas. Inexpensive and easy to use, these valves in AISI 316L can be installed on distribution loops or tanks, ...

DN: 2 mm
Pressure: 250 bar - 400 bar

... Internal tightness : Mini 10-3 mbar.l/s with helium ( Valve / Seat) External tightnes: Mini 10-4 mbar.l/s en helium KV with a one bar presssure loss ( ΔP = 1 bar) : - Internal diameter Ø 3,2 mm : KV = 0,23 - Internal diameter Ø ...

DN: 0.15 in - 0.25 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 160 °F

... “11” Series valves are available with a 5/32 push-in input port and a choice of 1/8 NPT(F), ¼ push-in or 5/32 push-in output ports. The output port also swivels to ease alignment during installation. Actuator options include push button, ...

DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar

... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and locking knob located ...

DN: 0.5 in - 3 in

... Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ball valve ...

DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C

... 2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The ...

DN: 24 in - 36 in

... DeZURIK’s stocks 24-36” Cast Iron PEC Eccentric Plug Valves with Mechanical Joint (MJ) end connections and NBR plugs. Manual actuators are configurable with handwheel or 2” nut. The interiors and exteriors can accept ...

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

... C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2 ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...

... These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution for every application. ...

DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C

... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is interchangeable with ...

DN: 1 in - 2.5 in

... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

... 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are also interchangeable ...

DN: 1.813 in - 7.063 in
Pressure: 15,000, 10,000 psi

... next project, Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed as a manual ...