DN: 40 mm - 150 mm
Pressure: 0.5 bar - 10 bar
Flow rate: 1 l/min - 400 l/min
... Overview
The BERMAD Hydraulic Control
Valve IR-105-Z is a diaphragm-actuated, hydraulically operated control
valve from the 100 Series. It opens and closes in response to local or remote pressure commands and ...
BERMAD CS Ltd
DN: 100, 125, 150, 160, 200 mm
... Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM. ...
LINDAB
DN: 40 mm
Pressure: 2 bar
Temperature: 0 °C - 60 °C
... simple installation Xylem’s Jabsco Y- Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. The Y- Valve ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 160 °C
... Benefits Lockable manual handle for enhanced security Compatible control units align with other valve types for a unified interface and shared spare parts Actuator Warranty & Reliability The actuator supplied ...
DN: 1.5 mm - 12 mm
Pressure: 1 bar - 10 bar
Temperature: 0 °C - 80 °C
... unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the regulator with ...
CAMOZZI AUTOMATION
DN: 6 mm - 300 mm
Pressure: 0 bar - 27.6 bar
Temperature: -50 °C - 204 °C
... style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should not be exchanged ...
Parker Refrigerating Specialties Division
DN: 25 mm - 300 mm
Pressure: 250 bar
Temperature: -273 °C - 450 °C
... Applications & Industries Energy The optimal solution for: Processes that cannot be stopped A high level of plant availability High required mass flows Connections ASME B16.5 NPS 1 to NPS 12 Flange class Inlet DIN EN 1092 PN 10 - PN ...
LESER GmbH & Co. KG
DN: 0.75 in - 3 in
Pressure: 0 bar - 17 bar
Temperature: -51 °C - 204 °C
... stringent requirements of the bioprocessing industry Weirless Radial diaphragm tank valves offer solutions to the most challenging applications. It is easy to weld our valves truly flush to the bottom of your tank with ...
Watson-Marlow Fluid Technology Group
DN: 4 mm
Pressure: 500 bar
... SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, zinc/iron-plated 3-way Ball Valves 24° 06L ...
STAUFF
DN: 2 mm - 30 mm
... This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional Full port in open ...
Celeros
Pressure: 1,034, 15,000 bar
Temperature: -18 °C - 204 °C
... style ball and stem that eliminates the possibility of ,,stem-turnout,, common with other valves designed for similar service. In addition, these specialty ball valves have re-torqueable seat glands that result in longer ...
Watts Fluid Air
DN: 8 in - 16 in
Pressure: 0 psi - 450 psi
Temperature: 121, 111 °C
... S)ORIT evaporator regulating valves have a brass body and extended copper connections. They are available with a range of adjustable settings and pressure tap. The primary function of these valves, referred to as EPR ...
DN: 16.5 mm - 220 mm
Pressure: 16 bar
Temperature: -20 °C - 85 °C
... Transair valves are designed for quick and easy intégration into a Transair system. Valves are an important addition to any compressed air system to stop the flow of air to certain parts of the system. Placing valves ...
Parker Legris
DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C
... The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems. ...
VAT Vakuumventile AG
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
... The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free and user-friendly. ...
KLINGER
Pressure: 200 bar
Temperature: -20 °C - 65 °C
... Key advantages - High pressure brass cylinder valve for Inert, Inert mixtures and flammable gas service - Permanent gas tight seal - π marking according TPED directive - Tested according EN ISO 10297 and CGA V9 standards - Compatible ...
Rotarex
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
... Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben der Verbindungselemente ...
HANSA FLEX AG
Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min
... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves ...
DN: 80 mm - 100 mm
Pressure: 16 bar
... description
Butterfly
valve with EPDM O-ring, made from UPVC (U-PVC), available in DN80 and DN100 sizes (PN16).
Product details
- Brand: U-PVC Check Valves
- Category: Check Valves
- Type:
NEISCO FOR MODERN WATER SYSTEMS PRODUCTION
DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar
... Overview
UPVC double union ball
valve with adjustable seat and female plain ends.
Product Details
- Type: UPVC Ball Valves
- Brand: U-PVC Ball Valves
- Category:
NEISCO FOR MODERN WATER SYSTEMS PRODUCTION
DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar
... union UPVC ball
valve BVDL13 for fluid isolation, featuring an adjustable seat and BS female plain ends; available in sizes from 1/2" to 4".
Product details
- Brand: U-PVC Ball Valves
- Category:
NEISCO FOR MODERN WATER SYSTEMS PRODUCTION
DN: 0.125 in - 0.375 in
Pressure: 15,000 psi
... Description
Ultra-high-pressure needle
valve rated to 100,000 psi for extreme environments. Precision-machined stem and metal-to-metal seat provide fine flow control and reliable shut-off for high-pressure test and process applications.
< ...
DN: 0 mm - 10,000 mm
Pressure: 20,000 psi
... Hiflux ball-med-20k is a high-pressure ball valve engineered for industrial systems requiring reliable shut-off and accurate flow control. Suitable for both liquids and gases, it can be configured for manual or actuated ...
DN: 2.4 mm - 18 mm
Pressure: 70 bar - 206 bar
... and check valves with integral Lok tube ends for instrumentation systems. The range covers fine-control needle valves (including graphite-packed models for high-temperature service), compact ball valves ...
DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C
... Product description
Needle
valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these
valves are used in demanding hydraulic systems such ...
DN: 3.18 mm
Pressure: 1.4 bar
Temperature: -73 °C - 232 °C
... both directions, WEH® needle valves perform this function with absolute reliability. The valves are extremely smooth-running and durable, as the valve needle and the rotating valve spindle ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C
... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...
Temperature: 0 °C - 110 °C
... atmosphere. 3-Way toggle valves may have a poppet or spool and by movement of the toggle may either be 2-position or have a momentary actuation. Features and Benefits Compact design, lightweight Will accept a variety of manual, ...
Clippard
Temperature: 32 °F - 230 °F
... check valve flow controls are typically used to control air flow from air cylinders, thereby controlling the speed at which the piston strokes, either while extending or retracting, depending on their location in the circuit. Flow ...
Clippard
DN: 0.125 in
Pressure: 100 bar
Temperature: 32 °F - 230 °F
... The JFC-2A Threaded Flow Control has a maximum operating pressure of 150psig, a temperature range of 32 to 230 degrees Fahrenheit and a 1/8" port. This device also has 10.5scfm airflow adjustable at 100psig. It is a highly efficient and reliable device ...
Clippard
DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min
... Circuit selector valve, manual operation maximum pressure ...
DN: 1, 0.75, 0.5 in
Pressure: 400, 350, 500 bar
Temperature: -20 °C - 125 °C
... Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options. ...
DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min
... Constant openning valve, 3 way, made in steel for working with high pressure. ...
DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar
... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is the Function of Foot ...
Elite Line Industrial Corp.
DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C
... Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection function to release ...
Elite Line Industrial Corp.
DN: 25, 32, 40, 50 mm
Pressure: 20.7 bar
... Test and Drain Valve is a compact three-in-one valve combining shut-off, test and drain functions for wet pipe fire sprinkler systems. UL Listed and designed to meet NFPA requirements, it provides a space-saving alternative ...
Elite Line Industrial Corp.
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C
... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...
UFLOW AUTOMATION
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
... Butterfly Valve Bi-directional zero leakage butterfly valve. ...
UFLOW AUTOMATION
DN: 0.375, 0.5 in
Temperature: 220 °C
Flow rate: 20, 10 m³/h
... Suction valves for vacuum press bags The suction valves described on this page have been designed for a quick vacuum connection on press bags for composite fibre products. These valves are composed ...
VUOTOTECNICA
DN: 0.375, 0.472, 0.25, 0.5 in
... Plunger valves are composed of a cylindrical brass body, a steel plunger with a conical valve and a thrust spring. Connected to vacuum, they are normally closed. They activate suction, thus creating vacuum, only when ...
VUOTOTECNICA
DN: 0.375, 0.25, 0.5 in
... Manual 2-way miniature vacuum valves These small manual valves are suited for intercepting vacuum on vacuum cup holders and any small utility in which solenoid valves ...
VUOTOTECNICA
Pressure: 10 bar
Temperature: -5 °C - 70 °C
... Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, it is possible ...
DN: 8, 4, 6 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C
... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...
DN: 4, 6, 8 mm
Pressure: 10, 6 bar
Temperature: -5 °C - 50 °C
... QUICK EXHAUST VALVE ► For higher piston speeds for cylinders ► To bring about quick-action ventilation, the valve must be installed as close to the cylinder's air connection as possible ...
DN: 8, 6, 4, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... flow type of tube size : ø4, ø6 and ø8mm were newly added. Enables to ensure larger flow rate with same tube size as conventional type. ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... different flow range for each size are available. Easier fine adjustment is possible in each flow range, compared to Pisco conventional standard speed controller. The industry's smallest and low profile. It has a very compact and ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... prevents unnecessary manual adjustments during the operations. Use a slot screwdriver to adjust the needle (speed adjustment). Design without an external needle for speed adjustment. Approx. 2/3 height of the conventional ...
NIHON PISCO CO., Ltd.
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C
... Universal angle seat globe
valve with plastic handwheel
The 2/2-way angle seat globe
valve GEMÜ 507 has an ergonomically designed plastic handwheel and is manually operated. The
valve spindle is ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 100 °C
... Valve with stainless steel handwheel and pneumatic safety function
Diaphragm
valve GEMÜ 650TL is a
manually operated diaphragm
valve with a pneumatic fail safe function. The
valve ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10, 80 °C
... Universal diaphragm
valve with high flow
valve body
The GEMÜ R677 2/2-way diaphragm
valve has a low maintenance plastic actuator and is manually operated. An integrated optical position indicator ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 8, 6, 4 mm
... The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework allows optimum chemical resistance which makes it ideal for use ...
DN: 11 mm
Pressure: 0 bar - 4 bar
Temperature: 20 °C
... Ball valve PP fits all containers with G 3/4" connection thread. It can be attached to nearly all containers with thread adapters. Robust industrial quality, large flow. - Suitable for crystallising media - With connecting cap nut, guaranteed ...
DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C
... ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection for optimal stop/flow function ...
DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C
... • Vented for easy manual vacuum release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical and compact than ...
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
... ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF position. This provides a simple, yet effective way ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... - Manually operated 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical neutrality. ...
DN: 25 mm - 250 mm
Pressure: 0 bar - 160 bar
Temperature: -60 °C - 530 °C
... Sliding gate control valve for high-pressure applications Product line GS4 The high-pressure sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process applications. Media ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 250 mm
Pressure: 0 bar - 100 bar
Temperature: -60 °C - 350 °C
... Temperature: Media temperature: -60 °C up to 350 °C Connection - Wafer type design Actuator variants - Manual adjustment ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C
... Temperature: Media temperature: -60°C up to 350 °C Connection - Wafer type design Actuator variants - Manual adjustment ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm
Pressure: 6 bar
Temperature: -20 °C - 140 °C
... Compact diaphragm valve with male ends for solvent welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm
Pressure: 6 bar
... Compact diaphragm valve with male ends for socket welding, metric series. The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined ...
FIP - Formatura Iniezione Polimeri
DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
... 2-way MM BRASS with caps and tangs Full bore PN16 ...
Comparato Nello S.r.l.
DN: 25, 20, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
... 2 way MF BRASS Sintesi ball valve 2-way MF BRASS with cap and tang ...
Comparato Nello S.r.l.
DN: 15, 25, 20 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
... 3-way MMM BRASS with caps and tangs Full bore PN16 ...
Comparato Nello S.r.l.
Pressure: 2.5 bar - 15 bar
Temperature: 0 °C - 60 °C
... Elcometer AGV Automatic General Valve ensures precision abrasive control and fail-safe shut down of both the blast stream and media flow. The Elcometer AGV Automatic General Valve utilises all the benefits of our General ...
Elcometer
DN: 15 mm
Pressure: 2.5 bar - 15 bar
Temperature: 0 °C - 60 °C
... can opt for the Mini General Valve. Alternatively, the larger 25mm (1") General Valve can be installed to most Blast Machines available on the market. Precise Abrasive Metering When developing Elcometer's General ...
Elcometer
Pressure: 15 bar
... can opt for the Mini General Valve. Alternatively, the larger 25mm (1") General Valve can be installed to most Blast Machines available on the market. Precise Abrasive Metering When developing Elcometer's General ...
Elcometer
DN: 0.5, 0.75, 1, 1.25, 1.5 in
Pressure: 25 bar
... For oxygen, for the manual interruption of gas supply lengths: 65, 120 mm weights: 1.030 / 1.800 g Approvals EN 9539 ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 1.5 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...
WITT-Gasetechnik
DN: 0.25, 0.5, 0.375, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves ...
ITV
DN: 0.5, 0.25 in
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C
... Operating pressure - Max. 25 bar, depending on design Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ ...
ITV
DN: 10, 7, 8, 12 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C
... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of PA66 O-ring made of NBR70 Thread Cyl. thread, DIN EN ISO 228 Con. thread, DIN ...
ITV
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
... The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable even during temperature ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
... The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve is moved to ...
Beswick Engineering Co, Inc.
DN: 0 mm - 0.81 mm
Pressure: 135 psi
Flow rate: 0 ft³/h - 20 ft³/h
The PCFCD-1N1 is designed to maintain a constant flow rate, which the customer can adjust, regardless of upstream or downstream pressure variations. It works with both liquids (incompressible fluids) and gases (compressible fluids) but is primarily intended ...
Beswick Engineering Co, Inc.
the best suppliers