DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 200 °C
... One piece ball/stem full bore system for superior performance Lining options for abrasive applications PVDF and UHMW-PE Maintenance-free and adjustable gas-tight stuffing box packing Face to face dimensions - DIN EN 558-1 Actuator connection ...
DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C
... bottom stand with an insert hole, DIAPHRAGM VALVE TYPE 14 helps support the piping. The valve is also provided with a flange stand to increase installation safety. Built-in Travel Stop(15-50mm) DIAPHRAGM VALVE ...
DN: 15 mm - 300 mm
Pressure: 16 bar - 100 bar
... Stem multi-stage sealing, valve seat elastic sealing design Safe and reliable Valve stem blowout prevention, fireproof, explosion-proof, anti-static and other functions design The torque is light and stable The ...
DN: 150 mm - 1,500 mm
Pressure: 0.2 bar - 3 bar
Temperature: 200 °C
... Max Leakage Class III (FCI 70-2) End Connections: Wafer, Flanged Material: Carbon Steel, AISI 304, AISI316 General Characteristics - ON/OFF or MODULATING Service or according to Customer Drawing - Outside Bearing - Tightness Class I, II ...
DN: 0.5 in - 24 in
... Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve ...
... A Ball valve is a quarter-turn valve used for shut-off application. The valve opens and closes the flow of the fluid via a built-in ball, that rotates inside the valve body. Ball valves ...
TECNOGROUP
DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
... In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of Construction • ...
ProSys Sampling Systems Limited
DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C
... Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main features • Large selection of ...
Swissfluid AG
DN: 25 mm
... Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female. ...
Nuevas líneas de extincion
... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not allow the forces ...
STURDY MACHINE
DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C
... This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate. ...
... quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk materials Configurations Non_stic|< coating, liner, coating. Actuation: manual, ...
DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h
... Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...
ASV Stuebbe GmbH & Co. KG
DN: 20, 25 mm
Pressure: 16 bar
EQOfluids FR
DN: 0.5 in
Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they directly influence ...
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
... Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet / Outlet: Copper ...
Carlos Arboles S.A.
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel free from ...
Kemper Olpe GmbH
Pressure: 40 bar
Temperature: -40 °C - 150 °C
... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of Brass 58 Nickel-Chrome ...
DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F
... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve unless otherwise ...
HIP
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
... Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting ...
MIX S.R.L.
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded acc. to DIN-259. ...
ABV
... Foot valve is virtual secondary suction valve placed at the bottom or foot of the suction pipe. Foot valve has function of check valve that make sure that the pump is always primed. ...
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased in size by ...
HYTORC-TECHNOLOGIES GMBH
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
... STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY EN ...
ACMO S.p.A.
DN: 50 mm - 600 mm
... Ductile Iron Full Lug Butterfly Valves Size: 2 to 24 in. (50 to 600mm) Description: These soft-seated butterfly valves are designed for a variety of general applications in the control of water, air, oil, gases, and ...
DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C
... Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, petrochemical, power génération ...
Indumart
Pressure: 20, 60 bar
... The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet. ...
DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min
... FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control valve runs with an utmost ...
Dicsa
DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F
... Size Range 1/4"~4" For chemical and industrial applications Blow-out proof stem design, 100% tested air under water at 100psi, open and closed positions Working pressure 1/4"~2" 1000 psi W.O.G; 2-1/2"~3" 800 psi W.O.G; ...
BUENO TECHNOLOGY
Pressure: 0.5 bar - 16 bar
... semi-automatic drain valves, fully automatic externally fitted drain valves A or B, and fully automatic internally fitted drain valves) can be mounted as an option. Manual Drain ...
Armaturen- und Autogengerätefabrik ewo Hermann Holzapfel GmbH & Co. KG
... Morsello Inox's Ball Valve has been engineered with an integrated ingot, complete with a full bore and a solid ball. The valve showcases a 180-degree opening spindle that enables manual operation, a PTFE-material ...
Morsello Inox srl
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
... Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite ...
LOCKWOOD
DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C
... Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing standards: ...
Pipe Valve Flange Factory Landee
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -10 °C - 130 °C
... Brass butterfly valve full bore, F/F threaded with throttling. ...
BONOMI GMBH
DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve ...
Xiamen Keheng Plastic Co., Ltd.
DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
... Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection ...
ERREESSE srl
DN: 50 mm - 355 mm
Temperature: 80 °C
... from material flow by a metal insert. By design, the valve “self cleans” material from the seat on each stroke of the valve blade improving overall seat life. Ideal application: Manually operated process ...
Vortex Global
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05 ...
Synthware glass
the best suppliers