DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
WIKA Alexander Wiegand SE & Co. KG
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy cleaning of the ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection valves ...
WIKA Alexander Wiegand SE & Co. KG
... The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap style (round ...
... crafted the user manual provided, ensuring that users can operate the valve safely and efficiently. The Binks Shut Off Valve is a reliable and versatile tool for fluid control applications. Its precise ...
... hose runs on the ground. FSV & MSV (Flat and Manual Sand Valves): FSV is for larger machines using expendable mineral or slag media; MSV fits ½- and 1-cuft machines with similar media. LPV (Lo-Pot Valve): ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made of stainless steel, ...
DN: 0 mm - 10,000 mm
Pressure: 2 bar - 16 bar
... The SKUM Water Actuated Foam Valve (WAFV) consists of a ball valve and an approved, corrosion-resistant actuator. The valve operates by water pressure only, from the mains water pressure supply on a bladder ...
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
... Self-draining, easy-to-clean bottom outlet valve CleanValve from De Dietrich is a high-performance bottom outlet valve designed for glass-lined, stainless steel, and nickel alloy reactors and tanks. Its self-draining ...
DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar
... M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. It features ...
DN: 15 mm - 20 mm
... Threaded valves with 500 N actuator -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model ...
DN: 25 mm - 50 mm
... Threaded valves with 1000 N actuator -Heating, ventilation and air conditioning -Standard mechanical manual override -Stroke from 7 to 25 mm -Auxiliary contacts -2 kΩ Potentiometer -Self-calibrating ...
DN: 6.35 mm
Pressure: 10 bar
... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, 1/4", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/4" (F). 24 V DC. Normally open type N.O. 10 bar. ...
SAMOA Industrial, S.A.
DN: 6.35 mm
... AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve. ...
SAMOA Industrial, S.A.
DN: 6.35 mm
Pressure: 65 bar
... Low and medium pressure 1/4" BSP (FF), quarter turn valve. ...
SAMOA Industrial, S.A.
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, 1/graphite and 1/oxygen. Depending ...
DN: 12, 14 mm
... One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. It can be ordered through Valvo ...
Pressure: 100 bar
Temperature: 80 °C
... The ball valve is manufactured from H17N14M2 grade material, which is equivalent to 316 stainless steel. Maximum temperatures of the medium should not be more than 80 degrees Celsius. The maximum working pressure is 100 bar. Input and ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
... HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. ...
... 3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, ...
... Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing hole • Stainless ...
Hughes Safety Showers
... Main valve assembly suitable for the 350L emergency tank shower from Hughes. 11/2 inch single union safeblock grey UPVC valve with solvent cement sockets. • WRAS approved • ISO EN 1452-3, NF and KIW A compliant • ...
Hughes Safety Showers
... Main valve assembly suitable for the 1200L and 1500L emergency tank shower from Hughes. 11/2 inch single union safeblock grey UPVC valve with solvent cement sockets. • WRAS approved • ISO EN 1452-3, NF and KIW A compliant • ...
Hughes Safety Showers
DN: 13 mm - 73 mm
Pressure: 0 bar - 45 bar
Temperature: -40 °C - 120 °C
... overview
LFBV is a
manually operated shut-off ball
valve designed for liquid, suction and hot-gas pipelines in commercial air-conditioning and refrigeration systems. The
valve stem opens or closes ...
DN: 0.75, 0.25, 0.5 in
Pressure: 100 bar
Temperature: -20 °C - 50 °C
... The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Handle: Steering wheel Handle material: Nickel-plated brass Valve ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
... Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges ...
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure range up to 4200 ...
Pressure: 1,400 bar
... MULTI-COUPLING SYSTEM S.r.l. designs and manufactures oil-hydraulic and hydrodinamic groups and plants for the most varied industrial sectors and for specific applications. The company was established in Legnano (MI), but soon the development of the ...
DN: 2 in - 12 in
Pressure: 200 psi
... • Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be operated by the ...
... Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. They are a crucial ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
... Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available cross-section can be increased or decreased, ...
Pressure: 600 bar
... • Manual operated valves (leakage free) • 3/3-way for use with single acting cylinders • 4/3-way for use with double acting cylinders • Maximum flow 40 l/min • Maximum working pressure 600 bar • Oil ports M18x1,5 • ...
QUIRI
DN: 0.375 in
Pressure: 700 bar
... ⅜" - 18 NPT connections Ensures system safety and control ...
DN: 50 mm - 60 mm
... Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return valve • ...
... be paid to the use of electric ball valves and butterfly valves in the following environments. Function classification 1. Bypass valve: The ball valve is generally opened by static ...
... Valves and Subplates For inline applications, use the 61642 Valve mounted on a 61646 Subplate. This set-up is also recommended for use with high volume air-powered hydraulic pumps in StayLock applications. For manifold ...
... Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of existing systems. ...
DN: 25 mm - 100 mm
... Stainless steel valves by VLS Components include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Sizes of stainless steel valves ...
Temperature: -5 °C - 50 °C
Flow rate: 83 l/min
... FEATURES: Available with flexible or rigid extension Fluids: Oil Nozzle tip with automatic on/ manual off 3⁄4” NPTF(f) inlet, with swivel Lever locking handle Lever guard Rate (per minute): 22 gallon (83 ...
Alemite
... VACUUM ADJUSTEMENT VALVE 1" Applications Vacuum level adjusting ...
SAPELEM
DN: 50 mm - 200 mm
Pressure: 0.5 MPa
Temperature: -30 °C - 120 °C
... Butterfly valves are made of steel and designed with mechanical seal structure. The flow direction arrow and switch positioning device are located at shaft head. Customized butterfly valve is also available depends on ...
... Manually operated. Motor/electrical actuator operated. Shutters type SKT can be installed into a grain spout for the regulation or cutting off of the flow. The shutter type SKT is controlled by means of special internal guides ensuring that kernels ...
DN: 2 in
... BACKWASH VALVE FOR SIDE MOUNTED SAND & D.E. FILTERS The side mounted Hi-Flow valve is designed for maximum performance and working pressures. Available in 2-in. slip models. FEATURES PVC body Large, one-piece ...
DN: 0.5 in
Pressure: 0 bar - 8 bar
Temperature: 4 °C - 90 °C
... Fine Flow Needle Valve Product Code - 22272908011 Name - Fine Flow Needle Valve Material - Reinforced Polypropylene Color - Orange Hydraulic Connection - BSP 1/2″ Seal Material - Viton Body Color - Gray Handle ...
TEFEN
... BelGAS Standard Needle Valves offer four choices in 316 stainless steel, as well as one piece forged carbon plated steel, soft seat and hard seat, angle and globe styles. The Mini valve offers 2 choices in 316 stainless ...
DN: 0.4 mm
Pressure: 345 bar
... A stainless steel two-position valve with a needle injection port on the front side. This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has ...
ECOM
DN: 50 mm - 1,000 mm
Temperature: -20 °C - 500 °C
... The slide valve, alternatively recognized as a gate valve or knife valve, serves as a specialized valve designed for the opening and closing of pipelines within solid material conveying ...
DN: 100 mm - 600 mm
Pressure: 0.1 bar - 14 bar
... In most cases, the valves are resistant to the maximum explosion pressure. The valve closes against the explosion pressure wave propagating in the ductwork. The dedicated double bellmouth-shaped closure of the explosion ...
Valve for oil discharge in case of pressure exceeding the limit
Pressure: 10 bar
Temperature: -20 °C - 60 °C
Flow rate: 25, 35 l/min
... Economizing valves for regulators Regulating valve to be placed at the outlet of central regulators for arc welding to reduce the welding pressure. Total safety and reliability. All our regulators are tested for ...
the best suppliers