DN: 2.5 in - 16 in
... operating nut or optional hand wheel. The non-rising stem flange x flange gate valves are available in 2 ½” – 16” and the non-rising stem push–on and mechanical joint gate valves are available in ...
... motor rotary valve was developed especially for use in medical water processing. If the water sensor comes into contact with liquids, the motor rotary valve closes within a few seconds and interrupts the water supply. ...
DN: 400 mm - 2,000 mm
... It mainly serves to adjust or stop the waste water level inside the channel. Turning the handwheel placed on the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way the clear opening. PRINCIPAL ...
DN: 20 mm - 63 mm
Pressure: 10 bar
... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness. ...
Codital
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust the control ...
Zaklady Automatyki POLNA S.A.
Flow rate: 500 us gal/min
... piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal ...
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
... As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, the Rimor technical ...
Rimor
... maintenance. Inline check valve/swivels are used at the inlet ports to provide backflow protection as well as freedom of movement. A wide range of peripheral items are available to enhance the operation of our valves, ...
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
... This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant which was installed ...
... Quick open / Quick close with positive locks Positive Viton® O-ring vacuum seal Type 304 stainless steel valve body High conductance Choice of Del-Seal™ CF or Kwik-Flange™ KF ...
DN: 0.125 mm
... This flow control valve is provided for repeatable oil flow control in one direction. This valve prevents damages to the system caused by high flow rates. It was made with a lockable adjustment knob. ...
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...
Meca-Inox
DN: 0.5 in - 4 in
Pressure: 16 bar
... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited. ...
SIMPLE VALVE, S.L.
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
... Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air. ...
SAF S.R.L.
DN: 50, 40, 25, 20 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C
... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free. ...
Airpipe Europe
DN: 2 in - 64 in
... • Pressure: ANSI CLASS 150LB-2500LB • Design of valves is in accordance with: API6D,ASME B16.34 • Length: ASME B16.10 • Connection standard: ANSI B16.25 • Test and examination:API6D,API598 ...
ROPO GmbH
DN: 100, 125, 160, 200 mm
Flow rate: 36 m³/h - 180 m³/h
... FOR EXTRACT AIR Circular disc valves with manually adjustable annular gap Nominal sizes 100, 125, 160, 200 mm Volume flow rate range 10 – 50 l/s or 36 – 180 m³/h Diffuser face made of formed sheet steel, powder-coated For variable ...
TROX
DN: 80 mm - 250 mm
... Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without mounting frame. Outake ...
DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar
... The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and Paper ...
ORBINOX
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
... Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size) ...
F.lli TOGNELLA
Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C
... Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F ...
DN: 6, 4 mm
Pressure: 2 MPa - 20 MPa
... Progress method Grease progressive valve SP For tightening torque Discharge volume - 0.2mℓ/ stroke Discharge port - Tube of 6mm, 4mm O.D used Grease inlet - Rc1/8 Max. working pressure - 20MPa Minimum operating pressure ...
DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...
Value Valves Co., Ltd.
Flow rate: 2 l/h - 15 l/h
... 4 –20 mA proportional control input V-notch precision rate valve Modbus Communication High quality stepper motor 5-POINT valve calibration Led indication of the valve position MANUAL ...
the best suppliers