Manual valves

DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar

... The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and Paper ...

DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C

... Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size) ...

Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C

... Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F ...

DN: 6, 4 mm
Pressure: 2 MPa - 20 MPa

... Progress method Grease progressive valve SP For tightening torque Discharge volume - 0.2mℓ/ stroke Discharge port - Tube of 6mm, 4mm O.D used Grease inlet - Rc1/8 Max. working pressure - 20MPa Minimum operating pressure ...

DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C

... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...

Flow rate: 2 l/h - 15 l/h

... 4 –20 mA proportional control input V-notch precision rate valve Modbus Communication High quality stepper motor 5-POINT valve calibration Led indication of the valve position MANUAL ...

DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa

... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

... AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only), ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...

Temperature: 425, 325, 530, 200 °C

... •Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil etc non corrosion ...

... The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") and PP3048063020 (63mm x 2"). ...

DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C

... high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 according to EN ...

DN: 40 mm - 300 mm
Pressure: 16, 6 bar
Temperature: -10 °C - 70 °C

... SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL / ELITA Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL can be used in every application where safe shut-off ...

... are three operating types: Electro-pneumatically actuation, drive-motor actuation, hand drive. If required it is possible to alter the operating type of the butterfly valves accordingly. ...

... flanged compact ball valve ; 2-way GRPP, ASPP or PVDF from 1/2'' to 2'' EPDM, FKM or FEP/FFKM o'ring PN10 ...

... pressure or by an external hydraulic or pneumatic pressure. The valve position will be controlled by a hand operated selector valve. The valve and the controls will be a Dorot Series ...

... Dimensions: DN04 to DN25 body: FSt-PI, free cutting steel, S355J2G3 ball + stem: free cutting steel, stainless steel (1.4571/316Ti) sealing: plastics, metal Pressure range: up to PN500 (note table of dimensions) Field of application: hydraulics, ...

Pressure: 3,000 psi

... Model RD-900 Selector Valve - 30 GPM SPECIFICATIONS Pressure Rating Maximum Operating Pressure ........ 3000 psi Flow Rating .....................................30 GPM Filtration: For general purpose valves, ...

DN: 0.375 in - 1 in
Flow rate: 30 l/min - 200 l/min

... Throttle Valves Valve Size 04 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-piate Mounting T : Threaded Connections Sériés Number ...

... JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and bonnet. Backseat ...

... . AFC Monel valves serve many different applications in these industries: • Chemical • Oil & Gas • Pharmaceutical • Nuclear Power • Marine • Petrochemical • Oil Refining • Sea Water Characteristics 1. AFC butterfly valve ...

... Applicable standards: STEEL BALL VALVES API 608/API60 STEEL BALL VALVES ISO 14313 FIRE SAFE, API 607 ANTI STATIC, API 608 STEEL VALVES,ASME B16.34 FACE TO FACE ASME B16.10 END FLANGES, ASME ...

Pressure: 150,000 Pa - 850,000 Pa

... DZ SERIES VALVE DZ Valve – This valve can be used as manual 3/2 valve. When the machinery is maintained and serviced, the valve for remaining pressure ...

DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C

... additional position switches •Space heater, space heater's thermal swich •Mechanical connection (lange F10, IS05210 • Manual control. •Gâte valve design standards: DIN3352, (ace to (ace dimensions DIN3302 F4, EN558 ...

DN: 3 in

... The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling capabilities. ...