Mival valves with handwheel

DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C

... switches •Space heater, space heater's thermal swich •Mechanical connection (lange F10, IS05210 •Manual control. •Gâte valve design standards: DIN3352, (ace to (ace dimensions DIN3302 F4, EN558 1 15/IS05752

DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C

Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure ...

DN: 0.25 in - 2 in
Pressure: 220, 210 bar
Temperature: 260, 240, 200 °C

TECHNICAL INFORMATION1. Needle valve2. Made of Stainless steel ASTM A182 F3163. Threaded ends according EN 10226-1 (EX ISO 7-1 e DIN 2999) gas4. Stem Packing PTFE + Graphite5. Max. Working pressure 3000 Lbs.6. Pressure ...

DN: 400 mm - 2,000 mm

It mainly serves to adjust or stop the waste water level inside the channel. Turning the handwheel placed on the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 200 °C

... 266ITT is our butterfly valve with a wafer type connection, seat and ptfe disc . The ptfe seat and disc give the valve great resistance to corrosion . The range is from DN 40 to DN 300 , replacing the ...

DN: 80 mm - 600 mm
Pressure: 10 bar - 40 bar

... delivers zero leakage. By using this design, the former two valve system with a spool piece becomes obsolete. This fact is not only important for in­stallation since you have to install only one valve ...

DN: 50 mm - 2,000 mm

Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is ...

DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C

... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form ...

DN: 1 in - 2.5 in

TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism.

DN: 50 mm - 400 mm
Pressure: 10, 7, 8, 5, 6 bar

Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...

DN: 50 mm - 1,400 mm
Pressure: 2 bar - 10 bar
Temperature: 120 °C

double-sided sealing with continuous valve plate and smooth dead zone-free flow ensures unobstructed closing with densities <5% and media containing solids also available with various seal types and surface treating ...

DN: 50 mm - 500 mm
Pressure: 16, 25, 40 bar
Temperature: -50 °C - 250 °C

Gate valves, also known as sluice valves, are great for tight shut-off of liquids. The Engelsberg gate valves are particularly suitable for fibre suspensions or other processes containing ...

DN: 250 mm - 1,000 mm

Use : For general applications, fluids, gas and water treatment. Body shape : Double flanged Type : 2314 Tightness: Elastomer (EPDM/NBR/VITON/HYPALON/NEOPRENE/SILICONE) Face to Face : EN 558-1/20 Max working pressure : ...

Pressure: 10 bar
Temperature: 135 °C

Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve seat in a leakage-free manner ...

Heavy duty slide valve made of cast iron for powders or granular products. This equipment ensures high seal level as for the external environment and can be supplied in three sizes with manual wheel or with pneumatic drive.

DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C

DeZURIK Eccentric Plug Valves' design features include eccentric action and resilient plug facings assure lasting dead-tight shutoff. Clean interior design and straight-through flow allow high maximum flow capacity with ...

DN: 2 in - 12 in

... Trunnion Mounted Ball Valve) Valtorc's trunnion mounted designed ball valves are a high strength and quality valve for your industrial needs. Offered in class 150/300/600/900 and ...

DN: 50 mm - 500 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C

Bottom angle control valve Type Bottom Angle Control Valve Size DN50x25~DN500x450 / 2"x1"~20"x18" Pressure rating Temperature range Body material WCB, CF8, CF8M, Ti, C-276 Leakage class ANSIIV, ...

Flanged diaphragm valve PPH, PVDF or UPVC from 3'' to 10" EPDM or PTFE diaphragm

DN: 50 mm - 600 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 120 °C

Valve Standard: Comply with BS 5150 (EN 1171) & MSS SP-70. Working Pressure and Température Size 50 to 600, working pressure PN16/Class125. Size 50 to 300, working pressure PN25/Class250. Température from -lO°C to 120°C Fiange ...

JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and ...

DN: 80 mm - 600 mm
Temperature: -46 °C - 593 °C

Lock Hopper Ball Valve Product type On/off valve Valve Type Lock Hopper Ball Valve Model Q*49H Size NPS 3～NPS 24 Operating temp. -46℃～593℃ Seal ...

Globe Valve Non Rising Stardard Connections:Flanged Ends JIS Class:10K Size:1/2" ~ 4" Product Details Features And Benefits Outside Screw and Yoke Bolted Bonnet Yoke Integral with Bonnet Loose Disc Integral ...

DN: 8 mm - 80 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 120 °C

Specification Used for water Thread standard: BS 21/ ISO 228-1-2000 Max. working pressure: 20 bar Max. working temperature: 120oC Origin: Vietnam Manufacturer: Minh Hoa Investment JSC. Minimum order quantity: 1,000 pieces Factory price