DN: 2 in - 24 in
Temperature: -29 °C - 200 °C
... Trunnion Ball Valve Temperature: - Normal Temperature Trademark: - SOLID Transport Package: - Plywood Case Type: - Trunnion Ball Valve Trunnion mounted ball valve usually has floating valve ...
Wenzhou Solid Mechanical Equipment Co., Ltd.
DN: 6 in - 12 in
... characteristics and can be used as a throttling manual control valve. By simply turning the handwheel, operators can fine tune the valve position to maintain a constant rate of flow. Few manual valves ...
Red Valve
DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C
... Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. Suitable for heating and conditioning ...
Brandoni
DN: 50 mm - 250 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 120 °C
... international standard. The main types of plastic valves are ball valves, butterfly valves, check valves, diaphragm valves, gate valves and globe valves. ...
SuZhou KoSa Environmental Protection CO.,LTD
Pressure: 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 42 l/min
... be locked in place. · Positive shut-off Operation The valve varies flow restriction by adjusting needle in or out and will shut off when fully closed. These Valves will meter flow in either direction. ...
Wenzhou Meric Hydraulic Technology Co.,Ltd
DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C
... Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Lining Material: PO, PE, PP F46, F4, PFA Bellows Material: ...
Valvesonly Europe
DN: 50 mm - 700 mm
... Neles™ knife gate valves are ideal for all industrial shut-off applications for example in pulp & paper and water & wastewater industries. Features Neles knife gate valves provide total operational reliability: Gland ...
DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C
... Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. Thus, weakening ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C
... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16. ...
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
... Hight quality bellow sealed globe valve, with double titanium bellows. ...
Dansk Ventil Center A/S
DN: 2 in - 24 in
Temperature: -30 °C - 180 °C
... DESCRIPTION • 3-piece ball valve ANSI150-300-600-900-1500-2500 • Full bore CERTIFICATS • 3.1 Material certificate • CE declaration • Fire safe API607 4e edition ...
Vapo Techniek B.V.
DN: 200 mm - 600 mm
... Model No.: BF300 Body Material: UPVC,PP,CPVC,PPG,PVDF Disc:UPVC,PP,CPVC,PPG,PVDF Stem:SUS410(standard),SUS304,SUS316 Seat:EPDM,VITON(FPM),NBR,HYPALON O-RING:EPDM,VITON(FPM) Size: DN200(8")-DN600(24") ...
Shie Yu Machine Parts Industrial Co., Ltd.
DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C
... Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure rating SW up ...
Stahl-Armaturen PERSTA
DN: 50 mm - 2,000 mm
... Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is appropriate for ...
C.M.O.
DN: 2 in - 12 in
... Trunnion Mounted Ball Valve) Valtorc's trunnion mounted designed ball valves are a high strength and quality valve for your industrial needs. Offered in class 150/300/600/900 and 1500 in sizes from ...
Valtorc
DN: 50 mm - 500 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C
... Bottom angle control valve Type Bottom Angle Control Valve Size DN50x25~DN500x450 / 2"x1"~20"x18" Pressure rating Temperature range Body material WCB, CF8, CF8M, Ti, C-276 Leakage class ANSIIV, V or VI Cv 5-4250 ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 8 mm - 14 mm
... micro-finshed components. Hosco valves are all stainless steel, smooth-bore, fully encapsulated, and cavity-free allowing them to flush easily and quickly so there is no place for dried paint to hide. Our valve family ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made of stainless steel, with spindle transmission ...
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
... Self-draining, easy-to-clean bottom outlet valve CleanValve from De Dietrich is a high-performance bottom outlet valve designed for glass-lined, stainless steel, and nickel alloy reactors and tanks. Its self-draining ...
... Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of existing systems. ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
... Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available cross-section can be increased or decreased, ...
DN: 32 mm - 1,500 mm
Pressure: 10, 16 bar
... These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are ...
DN: 6 mm - 42 mm
Pressure: 630, 400, 250, 315, 160 bar
... With Internal Threaded Spindle Connection with 24°-Cone for Compression Couplings DIN 2353 Note: Adjust stuffing box packing (Graphite) prior to initial working period.
DN: 25 mm - 200 mm
Pressure: 10 bar - 16 bar
... HYDRANT GATE VALVE S58 Compact gate valve with rubber-covered self expanding split ring seal, suitable for frequent operation with turbid irrigation water. On-off valve type applications: • Conveyor • ...
the best suppliers